ページ1に含まれる内容の要旨
<< Previous Next >>
Installing Your Multifunction
to Your Network for the First Time
PIXMA MG8220
Mac and Windows OS
1
ページ2に含まれる内容の要旨
<< Previous Next >> Installing Your Multifunction to Your Network for the First Time PIXMA MG8220 Macintosh and Windows OS Preparing to Connect My Multifunction to My Network 3 Network Requirements 3 Notes on Wireless Connection 4 Installing the Drivers & Software 5 2
ページ3に含まれる内容の要旨
Preparing to Connect My Multifunction << Previous Next >> To My Network Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network. Wireless Connection Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that configuration of the computer and access point or rout
ページ4に含まれる内容の要旨
Preparing to Connect My Multifunction << Previous Next >> To My Network An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without using an access point, is not supported. Notes on Network Connection • The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment. For details, refer to your device's
ページ5に含まれる内容の要旨
Installing the Drivers & Software << Previous Next >> Software Installation To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of application software to be installed.) IMPORTANT • Log on as the administrator (or a member of the Administrators group).
ページ6に含まれる内容の要旨
Installing the Drivers & Software << Previous Next >> Installing the PIXMA MG8220 on Your Wireless Network If you are installing your printer on your network for the first time, a step-by-step walk through of the wireless setup is built in to the installation routine of the software that shipped with your PIXMA. Simply insert the Setup CD-ROM that came with your printer into your CD-ROM drive and proceed through the easy to follow instructions. You’ll be printing wirel
ページ7に含まれる内容の要旨
Installing the Drivers & Software << Previous Installing the PIXMA MG8220 on Your Wireless Network If you can’t find your CD-ROM, you may download the MG8200 series Mini Master Setup, which includes the same step-by-step installation as the CD-ROM, by following the instructions below: 1. Click here to access the MG8220 Drivers & Software page. 2. Select the operating system of your computer (see example below). 3. Expand the ‘Drivers’ section by clicking the red triangle. 4. To the ri
