ページ1に含まれる内容の要旨
4-208-677-12 (1)
For your safety
Digital Photo Let’s get the photo
frame ready
Frame
Let’s view an image
DPF-E710
Try using various functions
Troubleshooting
Additional information
Operating Instructions
Before operating this unit, please read this manual thoroughly and
retain it for future reference.
© 2010 Sony Corporation
ページ2に含まれる内容の要旨
Disposal of waste batteries WARNING (applicable in the European Union and other European countries with To reduce fire or shock hazard, do not separate collection systems) expose the unit to rain or moisture. This symbol on the battery or on the packaging indicates that the battery Do not expose the batteries to provided with this product shall not be excessive heat such as sunshine, fire treated as household waste. On certain batteries this symbol might be used in or the like. combin
ページ3に含まれる内容の要旨
Notice for users Read this before using Program © 2010 Sony Corporation Notes on playback Documentation © 2010 Sony Corporation Connect the AC adaptor to an easily accessible AC outlet. Should you notice an abnormality in it, disconnect it from the AC outlet immediately. All rights reserved. This manual or the software described herein, in whole or in part, may not be Notes on copyrights reproduced, translated or reduced to any machine Duplication, edition, or printing of a CD, TV readable
ページ4に含まれる内容の要旨
Table of Contents Read this before using ......................................................................................3 For your safety Checking included items ...................................................................................6 Identifying the parts ..........................................................................................7 Digital photo frame ....................................................................................................7 Remote con
ページ5に含まれる内容の要旨
Troubleshooting If an error message appears .......................................................................... 21 If trouble occurs ............................................................................................. 21 Additional information Precautions .................................................................................................... 23 Installation ...............................................................................................................
ページ6に含まれる内容の要旨
oyou saey For your safety Checking included items Make sure that the following items are included. Digital photo frame (1) Stand (1) Attaching to the screw hole (.page 9) , Remote control (1) Removing the protective sheet (. page 9) , AC adaptor (1) Connecting to the AC power source (.page 11) , Exchangeable panels (3)* The supplied CD-ROM contains the Digital Photo Operating Instructions (this manual) (1) Frame Handbook that explains operations and setups CD-ROM (Digital Photo Frame
ページ7に含まれる内容の要旨
For your safety Identifying the parts x Digital photo frame Front LCD screen Remote sensor Rear BACK button ENTER button Direction (v/V) buttons Direction (B/b) buttons MENU button VIEW MODE button (.page 14) 1 (on/standby) button Standby indicator USB mini B connector (.page 20) Memory card slot (.page 13) Access lamp Holes for hanging unit on the wall DC IN 5 V jack (.page 11) Stand (.page 9) GB 7
ページ8に含まれる内容の要旨
x Remote control VIEW MODE buttons 1 (on/standby) button SLIDE-SHOW ( ) button SINGLE button CLOCK ( ) button INDEX ( ) button MENU button Zoom in ( ) button Direction (B/b/v/V) buttons ENTER ( ) button BACK button Zoom out ( ) button SELECT DEVICE button IMPORT ( ) button ROTATE ( ) button DELETE ( ) button About descriptions in this manual The operations described in this manual are based on remote control operation. When an operation is performed differently, for example, with the remote
ページ9に含まれる内容の要旨
Let’s get the photo frame ready Let’s get the photo frame ready P Notes Remote control � If the remote control stops working: Replace the battery (CR2025 Pull out the protective sheet before use as shown in the lithium battery) with a new one. figure. � When the lithium battery becomes weak, the operating distance of the remote control may shorten, or the remote control may not function properly. In this case, replace the Protective sheet battery with a Sony CR2025 lithium battery. Use
ページ10に含まれる内容の要旨
To display the photo frame on the wall PNotes � Use screws suitable for the quality of the material of the wall. The 1 Prepare screws (not supplied) suitable for the screw screws may be damaged, depending on the type of material holes on the rear panel. used in the wall. Set the screws in a pillar or stud in the wall. 4mm � When you want to re-insert the memory card, remove the photo frame from the wall, then eject and More than 25mm re-insert the memory card while the photo frame is
ページ11に含まれる内容の要旨
Let’s get the photo frame ready PNotes Turning the photo frame on � The socket outlet should be as close as possible to the unit, and easily accessible. � Do not place the photo frame on an 1 Insert the plug of the AC adaptor into the DC IN 5 V unsteady or tilted surface. jack on the rear of the photo frame. � Connect the AC adaptor to an easily accessible wall outlet close by. If 2 Connect the AC adaptor to the wall outlet. trouble occurs while using the The photo frame is automatically
ページ12に含まれる内容の要旨
Operations in an initial state zTips When the photo frame is turned on, the initial display appears. x If the photo frame is not operated If the photo frame is not operated for 10 seconds, the demo mode is displayed. x Releasing the demonstration mode If any other button than the power button is pressed, the screen returns to the initial display. Setting the current time P Tip The B/b buttons become activated only when the Clock and calendar 1 Press MENU, and B/b to select the (Setting
ページ13に含まれる内容の要旨
Let’s view an image Let’s view an image PNote Inserting a memory card When using a memory card of the following types, make sure to insert it in an appropriate adaptor. Insert a memory card firmly into the corresponding slot If you insert it without an adaptor, with its label side facing toward you (when you are facing you may be unable to remove it. As the back side of the photo frame). shown in the right-most illustration below, make sure to insert the following types of memory cards
ページ14に含まれる内容の要旨
Changing the display 1 Press the button corresponding to view mode you want to select. VIEW MODE buttons PNote The display changes to the selected view mode. If you do not operate the photo frame for a certain period of time, 2 Press B/b/v/V to select a desired style, and then the style indicated by the cursor is press (ENTER). automatically selected. The view mode screen is displayed. Displays Styles z Tip Single view, Multi image view, Clock Style descriptions: view, Calendar view, Time
ページ15に含まれる内容の要旨
Let’s view an image 4Setting information About the information displayed Icons Meaning on the LCD screen Protect indication Associated file indication (Displayed when there is an associated file such as a motion file or a miniature e-mail image file.) 5Image number (folder-file number) This is displayed if the image is DCF compliant. If the image does not comply with DCF, its file name is displayed. The following information is displayed. If you named or renamed the file on your 1Display
ページ16に含まれる内容の要旨
Try using various functions z Tips Various functions x Importing The number of images to be saved in the internal memory: � Importing an image (a memory card b the internal � Resize: approx. 250 images memory) � Original: the number of images may vary, depending on the � Exporting an image (the internal memory b original image file size. a memory card) x Exporting � Deleting an image Any memory card that is not recognized by this photo frame is shown in gray and you cannot select 1 When a
ページ17に含まれる内容の要旨
Try using various functions Specifying the playback device Press SELECT DEVICE. z What is “playback device”? Press v/V to select the playback device, and then press A memory card or the internal (ENTER). memory. P Note During Clock and calendar display, you cannot select the (Select device) tab. Adjusting image size and P Note orientation (Zoom in/Zoom out/Rotate) Enlarging an image may reduce the quality depending on the image size. Enlarging/Reducing Press (zoom in) or (zoom out) o
ページ18に含まれる内容の要旨
Changing the settings of the auto power on/off function z Tips 1 Press MENU, B/b to select the (Settings) tab. x During operation 2 Press v/V to select [Auto Power ON/OFF], and press The power is turned off (ENTER). automatically at the time you set for [Power-OFF timer]. 3 Press v/V to select [Setup method], and then press (ENTER). Then, press v/V to select [Simple] or x During the standby mode [Auto off], and then press (ENTER). The power is turned on automatically at the time y
ページ19に含まれる内容の要旨
Try using various functions 1Press V to select [Time setting] , (ENTER). 2Press v/V to select the desired period after which you want to turn the photo frame off automatically: 2 hours, 4 hours, or OFF. Then press (ENTER). 4 Press MENU. Changing the settings PNotes Press MENU, then B/b to select the (Settings) tab. � Depending on the status on the photo frame, some settings of Press v/V to select the item and setting value, and then some items cannot be changed. press (ENTER). They
ページ20に含まれる内容の要旨
Connecting to a computer P Notes � Use a mini B-Type USB cable.* 1 Connect the AC adaptor to the photo frame, and to * When you use a commercially- the AC power source. available USB cable, use a USB cable with a mini B-type 2 Connect the computer and photo frame with a plug (for the USB mini B commercially available USB cable. connector of this unit, frame- side connector type) shorter than 3 meters. 3 Turn the photo frame on. � If multiple USB devices are 4 Operate the computer to ex
