ページ1に含まれる内容の要旨
Introduction
Congratulations upon your selection of the QV-100 Liquid Crystal
Liquid Crystal Digital Camera
Digital Camera. The QV-100 comes with its own built-in liquid crystal
color monitor that let’s you instantly view the pictures you take.
QV-100
To get the most out of the QV-100, be sure to carefully read this
Owner’s Manual
manual and follow the instructions contained in it.
2
Contents
Using Auto Play .................................................................. 38
Precautions .....
ページ2に含まれる内容の要旨
Precautions Liquid Crystal Digital Camera • Never use the unit inside of an air craft or in any other areas where General Precautions its use is prohibited. Doing so can result in an accident. Be sure to observe the following important precautions whenever us- • Physical damage and malfunction of this unit can cause the image ing the QV-100. data stored in its memory to be deleted. Be sure to always keep All references in this manual to “this camera” and “the camera” refer backup copies of data
ページ3に含まれる内容の要旨
Unpacking General Guide Getting Acquainted Check to make sure that all of the items shown below are included The following illustrations show the names of each component, but- with your camera. If something is missing, contact your dealer as ton and switch on the camera. soon as possible. Top and Display DISP (Display) button MODE button /PROTECT (Timer/Protect) DEL (Delete) button button Shutter button Soft case [+] (Forward) button Camera EFFECT button Alkaline batteries (AA-size × 4) [–] (Re
ページ4に含まれる内容の要旨
Power Supply Getting Acquainted The camera features a two-way power supply that lets you use either Battery Handling Precautions batteries (AA-size Alkaline or Lithium) or household AC current. Incorrect use or handling of batteries can cause them to leak or burst and seriously damage your camera. Be sure to note the following To load batteries important precautions to avoid problems with batteries. Be sure that camera power is turned off whenever loading or replac- ing batteries. • Use only LR6
ページ5に含まれる内容の要旨
Power Supply Getting Acquainted • Always be sure to use the AD-C60 Using AC Power AC adaptor only. Using any other AC To power the camera from standard AC power, use the optional AC adaptor can cause damage to the adaptor (AD-C60). camera not covered by the warranty. • When unplugging the AC adaptor AC power terminal Caution from the wall socket, be sure to AC adaptor grasp the adaptor (not the cord). • Avoid an undue bending, pulling, and twisting of the AC adaptor's cord, and never try to leng
ページ6に含まれる内容の要旨
DEL PROTECT EFFECT DISP MODE ON/OFF POWER REC PLAY Recording Images Operation Caution Infrared Light • Never open the battery compartment cover, disconnect the Infrared light generated by a flash or other source can create image AC adaptor from the camera or unplug it from the wall color problems, such as red areas being recorded as green. Such socket while the “WAIT” message is on the LCD. Doing so color problems will show up in the LCD while you are composing the will not only make storage of
ページ7に含まれる内容の要旨
Recording Images Operation Notes Exposure Adjustment • Exposure adjustment is generally expressed in terms of an expo- This camera features an automatic exposure (AE) function that auto- sure adjustment value. The exposure adjustment value is always matically changes the shutter speed in accordance with lighting. In set to zero whenever you turn on the camera. addition, you can also manually adjust the exposure to compensate for backlighting, indirect indoor lighting, dark backgrounds, and other
ページ8に含まれる内容の要旨
Recording Images Operation • The manual exposure adjustment procedure (page 25) cannot be Using the Self-Timer used when an exposure warning indicator is on the LCD. Clear the With the Self-Timer, the shutter is released 10 seconds after you warning indicator by changing the aperture switch setting. press the /PROTECT button. • Pressing the [+] or [–] button to adjust exposure while an exposure 1. Enter the Record Mode. warning indicator is on the LCD causes a +/– exposure value to appear. This
ページ9に含まれる内容の要旨
Playing Back Images Operation Important! Producing a Multi-Page Display • Note that only images already stored in camera memory can be Four or nine memory pages can be displayed at the same time. This viewed on the TV screen. If you change to the camera’s Record feature can be used to display multiple memory pages on the cam- Mode, the image picked up by the camera’s lens will not appear on era's built-in LCD, or on the screen of a connected TV. the TV screen. Multi-Page Display (EFFECT Menu) Pa
ページ10に含まれる内容の要旨
Playing Back Images Operation Notes 4. Press the shutter button. • If the page number is displayed in the upper right corner of the • At this time the image is doubled in size. The portion that screen when you perform a zoom operation, the number is replaced appears on the screen is the center of the image. by a zoom area indicator ( ). This indicator shows you what part of the image is currently enlarged on the display. You can turn the zoom area indicator on and off by pressing the DISP button
ページ11に含まれる内容の要旨
Playing Back Images Operation 5. Display the page you want to protect. Protecting Memory Pages • Use [+] and [–] to scroll through the pages until the one you You can protect specific memory pages to ensure that they are not accidently deleted. want to protect is displayed. • Note that you cannot protect or unprotect memory pages when pro- 6. Press the shutter button to protect the displayed image. tected memory pages are hidden (page 45). • A protect indicator ( ) appears in the upper left corn
ページ12に含まれる内容の要旨
Deleting Memory Pages Playing Back Images Operation Use the procedures described in this section to delete memory Hiding Protected Memory Pages pages. You can delete individual pages, or all the pages currently This function makes it possible for you to hide protected memory stored in memory. pages so their images do not appear on the monitor during playback. Warning! To hide protected memory pages The delete operation cannot be undone! While holding down the [+] button, turn on the camera. Befo
ページ13に含まれる内容の要旨
Resolution Conversion Deleting Memory Pages Operation Use the following procedure to convert an image converted in the To delete all images in memory FINE Mode to a NORMAL Mode image. 1. Enter the Playback Mode. • After you convert a FINE image to a NORMAL image, the FINE • Slide the function switch to the PLAY position. image is automatically deleted. 2. Display the DELETE Menu. 1. Select the Playback Mode and turn on power. • Press the DELETE button to dis- • Slide the function switch to the P
ページ14に含まれる内容の要旨
Using the Camera with a Connected Device Using the Camera with a Connected Device • Remaining pages (page 27) are also recorded on the video tape if Connecting to another CASIO Digital Camera they are turned on. Be sure to turn off display of remaining pages if DIGITAL you do not want them in the taped images. You can connect the camera to another CASIO digital camera and • If the low battery indicator (page 29) is displayed while you are re- exchange image data between them. Connect the DIGITAL
ページ15に含まれる内容の要旨
Using the Camera with a Connected Device Using the Camera with a Connected Device VIDEO Using QV-Link Software and a Connection Cable Computer (Video Capture) The optionally available QV-Link Software and connection cable You can use the special video cable that comes with the camera to lets you transfer images from your digital camera to a personal connect directly to the VIDEO IN terminal of a personal computer computer. The following are the models of QV-Link software that equipped with vide
ページ16に含まれる内容の要旨
Troubleshooting Reference Sympton Probable Cause Action Sympton Probable Cause Action Camera is con- 1. Function switch set to 1. Set function switch to Delete opera- 1. All pages are pro- 1. Unprotect the page nected to a TV, REC PLAY (page 31). tion does not tected. you want to delete start when DEL (page 43). but LCD monitor 2. Incorrect camera-TV 2. Connect correctly us- is pressed. 2. Multi-page display 2. Change to a normal- contents do not connection ing the special video (page 34) or zoo
ページ17に含まれる内容の要旨
Specifications Reference Battery Life .......... LR6 (AM3) AA-size alkaline batteries General Approximately 150 minutes continuous operation Recording System ...... Digital (JPEG based)/Field recording Recording for about 96 images (one image per minute) Signal System ............ NTSC FR6 AA-size lithium batteries Approximately 240 minutes continuous operation Recording Medium ..... Built-in 32-Mbit flash memory Recording for about 180 images (one image per Number of Memory Pages minute) FINE(V
