ページ1に含まれる内容の要旨
(2in1 Copier/Printer)
MFC-9750
OWNER’S MANUAL
ページ2に含まれる内容の要旨
© 1999 Brother Industries, Ltd.
ページ3に含まれる内容の要旨
i Table of Contents Introduction Using This Manual ................................................................................. 1 Finding Information .............................................................................. 1 1 Symbols Used In This Manual.............................................................. 1 MFC-9750 Control Panel Overview ................................................... 2 Table of Options ...................................................................
ページ4に含まれる内容の要旨
TABLE OF CONTENTS ii Copying a Photograph .................................................................... 21 Basic Copy Operations........................................................................ 21 Copying One Page .............................................................................. 21 Stacking Multiple Copies (Using the ADF) ........................................ 22 Sorting Multiple Copies (Using the ADF) .......................................... 22 Single or Multiple
ページ5に含まれる内容の要旨
TABLE OF CONTENTS iii Paper Cassette ..................................................................................... 38 Two-Sided Printing (Manual Duplexing) ........................................... 39 Manual Feed Slot ................................................................................ 39 Loading One Sheet of Paper ........................................................... 40 Loading more than One Sheet of Paper .......................................... 40 Printing on Env
ページ6に含まれる内容の要旨
TABLE OF CONTENTS iv Brother HL-6/6V/10h/630series/660series/960/1260/WL-660: ..... 62 HP LaserJet series II, IID, IIP, IIP+, III, IIID or IIIP: .................... 63 HP LaserJet 4 Plus: ......................................................................... 63 NEC SuperScript 610/660: ............................................................. 63 EPSON ActionLaser 1100/1400: .................................................... 64 Lexmark WinWriter 200:.....................................
ページ7に含まれる内容の要旨
1 CHAPTER ONE Introduction 1 Using This Manual Thank you for purchasing a Brother multifunction center (MFC). This MFC has been designed to be simple to use. However, you can use your MFC to its fullest potential by taking a few minutes to read this manual. Finding Information All chapter headings and subheadings are listed in the Table of Contents. You will also be able to find information about a specific feature or function by checking the Index at the back of this manual. Also, throughout th
ページ8に含まれる内容の要旨
CHAPTER ONE 2 MFC-9750 Control Panel Overview 14 15 16 17 13 12 11 10 9 8 7 6 5 4 3 2 1 1 Copy 6 Copy Mode (and Indicators) (Temporary Setting) Press this key to start copying an Press to illuminate the LED that suits original that is in the ADF or on the the type of original. glass platten. 2 Stop Auto — Select when the original Press this key to cancel a copy contains both text and photographs. operation. The original will be ejected. Text — Select when the original 3 Clear contains only text.
ページ9に含まれる内容の要旨
INTRODUCTION 3 Copy: Print: 8 Enlarge (Temporary Setting) 12 Job Cancel Each key press shows the next pre- Terminates a print job in process and stored enlargement ratios: 100%, 120%, ejects the printout. 125%, 141%, 150%, 200%, 400%, 13 Menu MANUAL. For more choices, select Lets you access the function and MANUAL and use the numeric keys to programing mode. type any percentage between 101% and 400%. LCD (Liquid Crystal Display): 9 Reduce (Temporary Setting) 14 Status Each key press shows the n
ページ10に含まれる内容の要旨
CHAPTER ONE 4 Table of Options When you press Menu or Paper Size you can choose settings and test print operations. (See Initial Setup, chapter 2 for details.) Menu Main Menu Sub Menu Options Factory Setting 1.INITIAL SETUP 1.BEEPER 1.OFF2.LOW3.HIGH 2.LOW 2.SLEEP MODE –––– 05 MIN 3.PRINT DENSITY 1.LOW2.MID3.HIGH –––– 4.TONER SAVE 1.ON 2.OFF 2.OFF 5.PAGE COUNTER –––– –––– 6.DRUM LIFE REMAINING 100% 7.LOWER TRAY 1.ON 2.OFF 2.OFF 8.SYSTEM SETUP –––– –––– 2.PRINT OPTIONS 1.INTERNAL FONT 2.CONFIGURAT
ページ11に含まれる内容の要旨
5 CHAPTER TWO Assembly 2 Packing List Make sure you have the following items: Drum Unit Assembly (TN-6300) IEEE-1284 Compliant Bi-directioned Cable Power Cord Paper Cassette CD-ROM Owner’s Manual Whenever you transport the MFC, use the packing materials that came with your MFC and pack the MFC correctly.
ページ12に含まれる内容の要旨
CHAPTER TWO 6 Choosing a Location Place your MFC on a flat, stable surface, such as a desk. Select a place that is free of vibration and shocks. Locate the MFC near a standard, earthed electrical socket. Choose a location where the temperature remains between 10°C and 32.5°C. Avoid placing your MFC where it may be knocked. Do not place near heaters, air conditioners, water, chemicals, or refrigerators. Do not expose the MFC to direct sunlight, excessive heat, moisture, or dust. Do not connect y
ページ13に含まれる内容の要旨
ASSEMBLY 7 Assembly Release the Scanner Lock Lever The blue scanner lock lever is on the left side of the MFC. Push the lever up to unlock the scanner. IMPORTANT: This step must be made for the machine to work correctly. Scanner Lock Lever Lock Unlock Caution If CHECK SCAN LOCK appears on the LCD, immediately release the scanner lock lever. If you see MACHINE ERROR AF (or AE), stop operation and contact your Brother dealer for service. Install the Drum Unit Assembly (with Toner Cartridge) Un
ページ14に含まれる内容の要旨
CHAPTER TWO 8 Open the front cover of the machine. 2 Insert the drum unit assembly into the machine. 3 Close the front cover. 4
ページ15に含まれる内容の要旨
ASSEMBLY 9 Loading Paper in Multi-purpose Paper Cassette Pull the paper cassette completely out of the machine. 1 Slide the paper width and length adjusters to the position for the 2 paper size you are using. Fan the paper well. Load paper in the paper cassette. Press down on 3 the paper to flatten it in all four corners, keeping the paper level 2 below the guide. The cassette can hold up to 250 sheets of 75 g/m (20 lb) paper. Maximum Paper Height Guide
ページ16に含まれる内容の要旨
CHAPTER TWO 10 Slide the paper cassette into the machine until it locks into place. 4 Acceptable Paper Size : A4, Letter, B5, B6, A5, Executive 2 2 Weight : 64 g/m – 105 g/m Thickness : 0.08 – 0.13 mm Manual Feed Slot The manual feed slot is above the multi-purpose paper cassette. Load paper or an envelope one at a time. You do not have to remove paper from the paper cassette. Use the manual feed slot to print or copy on an envelope, label, card stock or thicker paper: Manual Feed Slot Acceptab
ページ17に含まれる内容の要旨
ASSEMBLY 11 Connect the Power Cord Connect the power cord. 1 When you connect the power, the screen displays READY 100% nnnn nnnnnn Power Cord NOTICE: n The MFC must only be used with the AC cord supplied which is fitted with an earthed plug. n Do not touch any parts that are moving. n Lightning and power surges may damage this product. We recommend that you use a quality surge protection device or unplug the power cord during a lightning storm.
ページ18に含まれる内容の要旨
CHAPTER TWO 12 Initial Setup The Menu key enables you to customize settings. Press Menu repeatedly until you see the option you want to select. Setting the Beeper Volume You can set the beeper to LOW, HIGH or OFF. The default setting is LOW. When the beeper is set to LOW or HIGH, the MFC beeps every time you press a key or make an error. Press Menu until you see 1.INITIAL SETUP. 1 Press 1 on the numeric keys to select it. 2 Press Menu until you see 1.BEEPER. 3 Press 1 on the numeric keys to sele
ページ19に含まれる内容の要旨
ASSEMBLY 13 Setting the Print Density If your machine is printing too light or too dark, you can adjust the print density level. The new setting will remain until you change it again. Press Menu until you see 1.INITIAL SETUP. 1 Press 1 on the numeric keys to select it. 2 Press Menu repeatedly until you see 3.PRINT DENSITY. 3 Press 3 on the numeric keys to select it. 4 Press a numeric key to select the option you want. 5 1.LOW2.MID3.HIGH Press Stop to exit. 6 Toner Save You can conserve toner usi
ページ20に含まれる内容の要旨
CHAPTER TWO 14 Printing a System Set up List You can print a list of various system settings. Press Menu until you see 1.INITIAL SETUP. 1 Press 1 on the numeric keys to select it. 2 Press Menu repeatedly until you see 8.SYSTEM SETUP. 3 Press 8 on the numeric keys to select it. The MFC starts printing. 4 Press Stop to exit. 5 Optional Lower Tray Turning On Lower Tray Switch this function ON to use the optional lower paper cassette. If you switched ON, you can set the paper size for each cassette.
