ページ1に含まれる内容の要旨
MANUAL
CCD COLOR CAMERA
IK-629A
Ready
Recorder
ページ2に含まれる内容の要旨
CONTENTS SECTION 1 GENERAL DESCRIPTION (IK-629A) 1. FEATURES & DESCRIPTION .......................................... 1-2 2. COMPONENTS ................................................................. 1-2 3. PART NAMES & FUNCTIONS ......................................... 1-2 4. CONNECTIONS AND OPERATIONS .............................. 1-3 5. LENS .................................................................................. 1-4 6. AUTOMATIC ELECTRONIC SHUTTER (AES) ............... 1-4 7. B
ページ3に含まれる内容の要旨
SECTION 1 GENERAL DESCRIPTION 1-1 (IK-629A) IMPORTANT SAFEGUARDS CAUTION The CAUTION label, shown on the left, RISK OF ELECTRIC SHOCK is attached on the bottom of camera. DO NOT OPEN 1. Read Instructions 12. Lightning CAUTION TO EDUCE THE RISK OF ELECTRIC SHOCK. All the safety and operating instructions should be For added protection for this video product during a DO NOT REMOVE COVER (OR BACK). read before the product is operated. lightning storm, or when it is left unattended and NO USER
ページ4に含まれる内容の要旨
50 Recorder Ready 1-2 1. FEATURES & DESCRIPTION : 3. PART NAMES & FUNCTIONS : 1. IK-629A has following functions. (1) Since this cameras uses AC 24V ~ / DC 12V ---, it can be installed and built into system easily. (2) This camera turns color by day to black and white by night automatically. (DAY/NIGHT function) (3) Camera synchronization mode is selectable between internal and line- lock. (4) This camera adjusts shutter speed according to the subject brightness automatically. (AES) (5) BLC i
ページ5に含まれる内容の要旨
1-3 Line - Lock control 4. CONNECTIONS AND OPERATIONS Matching the vertical synchronization with the power frequency is called Notes on connecting the Line-Lock. Power plugs of connected equipment must be disconnected before installations. This function is activated when the LINE LOCK switch is set to ON. A 75-ohm coaxial cable (3C-2V or 5C-2V) is required for standard connection. ON O N 12 3 4 For details of wiring and operation of equipment to be connected, refer to their OFF ope
ページ6に含まれる内容の要旨
1-4 5. LENS 6. AUTOMATIC ELECTRONIC SHUTTER (AES) Exposure time is controlled automatically within a range of 1/60 sec. to Back-Focus Adjusment 1/100000 sec. to obtain an adequate signal when the back panel switch is Back-Focus is adjusted at the factory to accommodate most standard lenses. turned to AES. However, at times, slight adjustment to the IK-629A back-focus is necessary. Focus Lock Screw When the back panel switch is turned to VIDEO or DC, the exposure time is Mount the Lens to the
ページ7に含まれる内容の要旨
1-5 If the DAY / NIGHT LEVEL switch is set to Low (OFF position), the croma cut 8. WHITE BALANCE (AWB) level is set less than 20 to 30 IRE. O In this camera, the white balance is automatically adjusted corresponding to ON N 12 3 4 OFF the color temperature variations on the object. DAY / NIGHT LEVEL DAY / NIGHT (ON/OFF) This camera is applicable to color temperature of 2500 to 10K. If this switch is set to High (ON position), the croma cut level is set less than 40 to 50 IRE. Note O ON When ex
ページ8に含まれる内容の要旨
50 Recorder Ready 1-6 Do not splash water on the camera 13. EXTERIOR VIEW Install the camera where the camera can be kept dry. If the camera gets wet, turn off the power and contact your dealer. Install the camera Where no video noise appears If cables are wired near electric lighting wires or a TV set, noise may appear in images. In this event, relocate cables or reinstall equipment. Check the ambient temperature and humidity Avoid using the camera where the temperature is hotter or colder th
ページ9に含まれる内容の要旨
SECTION 5 SPECIFICATIONS 1. SPECIFICAIONS – Power AC 24V ~ ±10% 60Hz / DC 12V ... ±10% Power consumption IK-629A, IK-644A: 4.0w (max) with AI lens IK-645A: 4.5w (max) with AI lens Image sensor 1/3 inch CCD image area sensor Image pickup area 4.96mm (0.195inch) horizontal x 6.0mm (0.236inch) vertical (1/3inch type) Effective picture element IK-629A: 510 horizontal x 492 vertical IK-644A, IK-645A: 768 horizontal x 494 vertical Scanning system 2 : 1 interlace NTSC Standard TV system Scanning freque
