ページ1に含まれる内容の要旨
INSTRUCTION MANUAL
COLOR CAMERA C-CV14-CS NTSC
C-CV14-CS PAL
Thank you for purchasing TOA’s Color Camera. Please carefully follow the instructions in this manual in
order to ensure long, trouble-free use of your color camera.
ページ2に含まれる内容の要旨
TABLE OF CONTENTS 1. SAFETY PRECAUTIONS ................................................................................ 3 2. GENERAL DESCRIPTION ............................................................................. 4 3. HANDLING PRECAUTIONS .......................................................................... 4 4. NOMENCLATURE ............................................................................................. 5 5. INSTALLATION .............................................
ページ3に含まれる内容の要旨
1. SAFETY PRECAUTIONS • Before installation or use, be sure to carefully read all the instructions in this section in order to ensure long, trouble-free operation. • Be sure to follow all the precautionary instructions in this section, which contain important warnings regarding safety. • After reading, keep this manual handy for future reference. Safety Symbol and Message Conventions Safety symbols and messages are used in this manual to prevent bodily injury and property damage which could resu
ページ4に含まれる内容の要旨
NTSC version complies with Part 15 of the FCC Rules. Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communicat
ページ5に含まれる内容の要旨
4. NOMENCLATURE 1 3 2 4 6 24V 12V + - IRIS OFF ON FOUCUS ADJ BLC SHUTTER H L VIDEO OUT 7 8 9 5 10 (1) Lens connector (7) Iris control (2) Back focal length adjustment ring (8) Video output terminal (BNC) fixing screw (3) Camera mount fixing screw (9) Mode setting switch (4) Camera mount (10) Camera mount fixing hole (5) Back focal length adjustment ring (6) Power input terminal (24 V AC or 12 V DC) Note Fixing holes (10) are provided in both the top and bottom panels. 5
ページ6に含まれる内容の要旨
5. INSTALLATION [Ceiling mounting example] [Wall mounting example] Ceiling panel Camera mounting bracket (optional) Wall Lock lever Pedestal Camera mount Camera mounting bracket (optional) Wall WARNING Camera mounting bracket (optional) Install the unit only in a location that can structurally support the weight of the unit and the mounting bracket. Doing otherwise may result in the unit falling down and causing personal injury. 1. Attach the lens to the camera. • Insert the lens into the ca
ページ7に含まれる内容の要旨
Notes Under 5 mm • To avoid damaging the internal sections of the camera's lens mount, be sure that the lens flange is less than 5 mm thick as illustrated on the right. • C-mount lenses must be used in conjunction with the Lens Mounting Adapter CF-5 (optional). Lens • When used 1/3 type lens, an angle of view becomes narrow. 2. Mount the optional camera mounting bracket to a ceiling or wall. Using an electrical box, fix the camera mounting bracket with its supplied screws. Run the coaxial cabl
ページ8に含まれる内容の要旨
7. ADJUSTMENT 1. Switch on the camera power after completing camera connections. Power is supplied to the camera. 2. Normally,set the Shutter Speed switch to "1/60"(NTSC) or "1/50"(PAL) position. Flickering of the picture may interfere with the view under fluorescent lamp in the area with power frequency of 50 Hz(NTSC) or 1/60 Hz(PAL). In such cases, set the switch to "1/100"(NTSC) or "1/120"(PAL) position, and the image free from flickering can be obtained. Note If the Shutter Speed switch of
ページ9に含まれる内容の要旨
8. ABOUT THE MODE SETTING SWITCH Set the Mode Setting switch for the best possible picture reproduction depending on installation conditions. Mode Setting Switch (Factory-preset setting) 24V 12V OFF ON + - Adjustment switch IRIS OFF ON FOUCUS ADJ BLC Backlight Compensation switch SHUTTER L H Shutter Speed switch (NTSC) 1/60 1/100 (PAL) 1/50 1/120 VIDEO OUT 8.1. Adjustment Switch Set this switch when adjusting the lens focus.(Provides the same effect as when using the ND filter.)
ページ10に含まれる内容の要旨
9. IF YOU THINK THERE IS A FAILURE: (TROUBLESHOOTING) Symptom Possible Cause Remedy Camera images are • The monitor’s power switch is not • Turn on the power switch. not displayed on the set to ON. monitor. • Cables are not correctly connected. • Connect correctly. • The BNC plug is not correctly • Solder correctly. soldered. • Power is not supplied to the • Switch on the power. camera. Pictures are not clear. • The lens is not properly focused. • Adjust the lens. • The lens is dirty. • Wipe t
ページ11に含まれる内容の要旨
10. SPECIFICATIONS Model No. C-CV14-CS (NTSC) C-CV14-CS (PAL) Power Source 24 V AC, 50/60 Hz, or 12 V DC Power Consumption 2 W Image Device 1/4” IT-CCD Number of Effective Pixels 768 (H) x 494 (V), 380,000 pixels 752 (H) x 582 (V), 440,000 pixels Scanning System 2:1 interlace Scanning Frequency 15.734 kHz (H), 59.94 Hz (V) 15.625 kHz (H), 50 Hz (V) Video Output VBS1.0 V(p-p), 75 Ω , BNC connector Synchronizing System Internal synchronization Resolution H: 480 lines (center), V: 350 lines H: 470
ページ12に含まれる内容の要旨
Printed in Vietnam 133-12-881-7D
