ページ1に含まれる内容の要旨
Operating Instructions
Network Camera
Operating Instructions
QSINUFO
`
1
ページ2に含まれる内容の要旨
Operating Instructions Please read this manual before using and save this manual for future reference. Introduction Please check the following items when unpacking. AC adaptor — 1 pc. I/O port link line — 1 pc. Category 5 cross cable — 1 pc. Setup CD-ROM — 1 pc. Operating Instructions — 1 pc. Trademarks Netscape and Netscape Navi
ページ3に含まれる内容の要旨
Operating Instructions Table of Contents 1. Product Introduction............................................................ 4 1.1 Getting to know the Network Camera.............................................................................4 1.1.1 Main features............................................................................................................4 1.1.2 System Requirements............
ページ4に含まれる内容の要旨
Operating Instructions 2.3.14 PTZ Control Settings............................................................................................30 2.3.15 Other settings .......................................................................................................31 5. Technical Guides ............................................................. 34 3.1 Maintenance .................................................
ページ5に含まれる内容の要旨
Operating Instructions 1.1.2 System Requirements The PC and the network must meet the following technical specifications for the Network Camera to work properly. Item Description Operating System Microsoft Windows 98 Microsoft Windows 2000, Microsoft Windows ME Microsoft Windows NT® 4.0, Microsoft Windows XP Network Protocol TCP/IP network protocol installed. (HTTP, FTP, SMTP, TCP, UDP, IP, ARP, ICMP) CPU Pentium® II 30
ページ6に含まれる内容の要旨
Operating Instructions 1.2.2 Rear View From left to right: RJ45: 100 Base-T：Ethernet Indicator I/O：Including two I/O inputs and two I/O outputs. COMM port: including one RS-232 and one RS-485and one LINE OUT。 BNC port: video output. Reset key DC IN jack: 12v 1A Switch: BLC, IRIS, AGC, AWB 1.3 Network Camera Installation This section explains how you can install the Network Camera. Network Camera has a i
ページ7に含まれる内容の要旨
Operating Instructions 2.Hub Connection needs category 5 straight cable and PC Connection needs category 5 cross cable. 3.LAN (Intranet)、Internet Connection with Ethernet Switching Hub Network Camera can be installed on the LAN. Network Camera can be accessed through the Internet. 7
ページ8に含まれる内容の要旨
Operating Instructions 1.3.2 Confirming the Network Camera Setting To confirm if the Network Camera is configured correctly, please access to Top Page. If the Top Page appears, your Network Configuration is completed. 1. Start up the web browser. 2. Enter "http://IP address : Port No." in the address field and press [Enter]. Top Page appears. 1.3.3 Setting Network Parameters IP Network: PC, Network Camera an
ページ9に含まれる内容の要旨
Operating Instructions permission to download ActiveX Controls (OCX file) used to display motion video. Please allow the file to be installed. It is required and will not cause any problems with other applications on the PC. Use reset key IP will be changed to 192.168.1.252. Blinking will occur during the following situation. Press reset key until the electrical source blinking. 1.3.4 Use ARP command Attention before
ページ10に含まれる内容の要旨
Operating Instructions C:\>arp -d C:\>arp -s 192.168.1.61 00-0c-e8-00-00-01 C:\>ping -t 192.168.1.61 Pinging 192.168.1.61 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Reply from 192.168.1.61: bytes=32 time=5ms TTL=255 Reply from 192.168.1.61: bytes=32 time=4ms TTL=255 Reply from 192.168.1.61: bytes=32 time=4ms TTL=255 Reply from 192.168.1.61: bytes=32 time=4ms TTL=255 Ping st
ページ11に含まれる内容の要旨
Operating Instructions 2. Network Camera Screen and Setup window 2.1 Network Camera View Image The view image enables you to access to the Top View Image screen (Single Camera/Multi-Camera screen). Authentication window can set password for the link at. 11
ページ12に含まれる内容の要旨
Operating Instructions 1. View Image Single Camera / Multi-Camera 2. System Configuration 3. Help 4. Language : English Chinese . 2.2 Viewing the Top View Image screen The Top View Image screen consists of Single Camera and Multi-Camera screen. Single Camera screen Item Description 12
ページ13に含まれる内容の要旨
Operating Instructions Brightness Brightness control has 17 steps including Saturation Saturation control has 9 steps including Volume Volume control has 10 steps including Iris Adjust Iris Resolution Selects 640X 480, 320X240 (default) or 160X120. Image quality Favor clarity/Standard/Favor motion 2.3 Setup window—System Configuration Setup Page controls all features of the Network Camera. The authenti
ページ14に含まれる内容の要旨
Operating Instructions User: admin Password: admin System Configuration 14
ページ15に含まれる内容の要旨
Operating Instructions Network Configures the network setting Date/Time Sets the network Date and Time Sets administrator ID and password for the Administrator security. Sets General User ID and password for the General User security. Setup image compression ration, voice input Picture/voice gain and select OCX. Basic Setup Multi-Server Setup Multi-Server Setup the alarm occur condition and the I/O port outpu
ページ16に含まれる内容の要旨
Operating Instructions Show the event properties: message type Event Viewer and alarm type, ID, time. PTZ PTZ PTZ control settings. Restart Restart the network camera. Reset Setting Reset the video server form factory default. Others System information Show system information. Update firmware Update the system. Language You can select Chinese or English. language 2.3.1 Network Network window can set up the each
ページ17に含まれる内容の要旨
Operating Instructions Network Name 4 to 15 English letters，2 to 7 Chinese characters Port No. Set to 80. (Default) IP Address and Subnet Mask Check Static and set Static IP address and Subnet Mask. DHCP Please check DHCP when the ISP uses the DHCP server function that assigns an IP address to the Network Camera automatically. Default Gateway IP Gateway Enter it in gateway IP.. PPPOE Gateway Enter it in PPPOE user
ページ18に含まれる内容の要旨
Operating Instructions 2.3.2 Date/Time Item Instructions Limitation Display current Camera date 1.Date and Time and time. 2.Set Network Network Camera can adjust Camera Date and the internal clock. Time Make the Network Camera the (1)Synchronize internal clock together With Current current the calculator clock is Computer Time synchronous • The date is from 1970 to 2039 , according to yyyy- mm-
ページ19に含まれる内容の要旨
Operating Instructions 2.3.3 Administrator Administrator window allows the administrator to limit or exclude the access to selected Network Camera feature. Individual levels of access can be defined for multiple users. The administrator can select one of three security levels: [None] [Administrator only]: Setup Page for Administrator only [Administrator and General User]: Setup Page for Administrator and Viewer Page fo
ページ20に含まれる内容の要旨
Operating Instructions 2.3.4 General User General User window allows the administrator to create the General User ID and password for the security level defined as General User. User Name List: User Name List displays the registered user name.[Delete] and [Modify] deletes/modifies the General User in the list. New User: Enter the General User Name, password to confirm. 20
