ページ1に含まれる内容の要旨
INSTRUCTION MANUAL
VPC-E2100
Digital Camera
14 Mega Pixels
Please read these instructions carefully before using the camera.
Keep this manual in a safe place for later reference.
ページ2に含まれる内容の要旨
Table of Contents Preface ........................................................................................................ 3 About this Manual .................................................................................. 3 Safety and Handling Precautions.............................................................. 3 FCC Information..................................................................................... 6 Declaration of Conformity...................................
ページ3に含まれる内容の要旨
Using the Setup Menu................................................................................. 57 Setting Sounds..................................................................................... 57 Setting Power Save............................................................................... 57 Setting LCD Save.................................................................................. 57 Setting Date & Time .................................................................
ページ4に含まれる内容の要旨
Preface About this Manual This manual is designed to assist you in using your new digital camera. All information presented is as accurate as possible but is subject to change without notice. Copyright This manual contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer. © Copyright 2011 Federal Communications Com
ページ5に含まれる内容の要旨
Safety Instructions Read and understand all Warnings and Cautions before using this product. Warning Do not disassemble, change or repair the camera. This might cause fire or electric shock. For repair or internal inspection, ask the store of purchase. Do not use the camera in areas near water. This might cause fire or electric shock. Take special care during rain, snow, on the beach, or near the shore. Do not place the camera on inclined or unstable surfaces. This might cause the camera to f
ページ6に含まれる内容の要旨
For American Users The following advisory is included in accordance with the laws of the State of California (USA): WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects or other reproductive harm. • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designated to provide reasonable protection against harmful interference in a residential
ページ7に含まれる内容の要旨
For EU Users The symbol mark and recycling systems described below apply to EU countries and do not apply to countries in other areas of the world. Your SANYO product is designed and manufactured with high quality materials and components which can be recycled and/or reused. The symbol mark means that electrical and electronic equipment, batteries and accumulators, at their end-of-life, should be disposed of separately from your household waste. Note: If a chemical symbol is printed beneath t
ページ8に含まれる内容の要旨
Declaration of Conformity Model number: VPC-E2100 Trade name: SANYO Responsible party: SANYO FISHER COMPANY Address: 21605 Plummer Street, Chatsworth, California 91311 Telephone No.: (818) 998-7322 This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Canadian ICES-003 Inf
ページ9に含まれる内容の要旨
Battery Information • Turn off the camera before installing or removing the battery. • Use only the provided batteries or type of battery and charger that came with your camera. Using other types of battery or charger may damage the equipment and invalidate the warranty. • When using Li-ion battery in this product, ensure that they are inserted correctly. Inserting the battery upside down can cause damage to the product and possibly cause an explosion. • When the camera is used for an extend
ページ10に含まれる内容の要旨
Introduction Congratulations on your purchase of the new digital camera. Capturing high-quality digital images is fast and easy with this state-of-the-art smart camera. System Requirements In order to get the most out of your camera, your computer must meet the following system requirements: For Windows: • Windows XP/Vista/Win7 • Processor: Pentium II 450MHz or above • Memory: 512MB or above • HDD space: 200MB or above • 16bit color display monitor • Microsoft DirectX 9.0C • USB port a
ページ11に含まれる内容の要旨
Package Contents Please check the contents of your camera package. It should contain: Digital camera AA battery x 4 pcs Strap USB cable CD-ROM Quick Start Guide Lens cover Lens Strap 10
ページ12に含まれる内容の要旨
Camera Views Front View 1. Self-timer LED/ AF Assist Lamp 2. Microphone 3. Lens Back View 4. LCD monitor 5. LED indicator 6. Movie button 7. Playback button 8. OK button/4-way navigation control 9. Function/Delete button 10. Menu button 11
ページ13に含まれる内容の要旨
Top View 11. Flash 12. Zoom lever 13. Shutter button 14. ON/OFF (Power button) 15. Mode dial Bottom View 16. Battery/Memorycard compartment 17. Tripod screwhole 12
ページ14に含まれる内容の要旨
Right View 18. Strap ring Left View 19. Strap ring 20. Speaker 21. USB AV/Out Camera Buttons Your camera is equipped with different buttons for ease of use. Button Description Power Press the Power button to turn the power on/off. Shutter Press to capture an image or start/stop recording audio clip. In photo and movie mode, spin the Zoom lever to left to zoom out, right to zoom in. Zoom lever In Playback mode, spin to zoom in to magnify image or zoom out enter 9-image/calendar thumbnails. Men
ページ15に含まれる内容の要旨
Navigation Control The 4-way Navigation Control and the OK button allow you to access the various menus available from the On Screen Display (OSD). You can configure a wide range of settings to ensure maximum results from your images and videos. Further functions of these buttons are as follows: No. Description 1 Face Tracking/Rotate Button 2 Macro Button 3 Display Button 4 Flash Button 5 OK Button Button Description 1. Confirm a selection when using the OSD menus. OK 2. In Playback Movie/Aud
ページ16に含まれる内容の要旨
Camera Memory Internal memory Your camera is equipped with 128MB of internal memory. Users can store files up to 108MB. If there is no memory card inserted in the memory card slot, all images, videos and audio clips recorded are automatically stored in the internal memory. External storage Your camera supports SD cards of up to 4GB in size. It also supports SDHC cards with a maximum capacity of 32GB. Then also supports SDXC cards with a maximum capacity of 64GB. If there is a storage card
ページ17に含まれる内容の要旨
3. Insert the batteries into the compartment with the terminal facing inside the camera with correct orientation as shown. 4. Close and lock the battery/memory card compartment. Inserting an SD/SDHC/SDXC Memory Card Expand your camera’s storage by using SD, SDHC or SDXC memory cards. 5. Unlock and open the Battery/memory card compartment at the bottom of the camera. 6. Insert the SD/SDHC/SDXC card into the memory card slot with the metallic part facing the back side of the camera. 7. Pus
ページ18に含まれる内容の要旨
Turning the Power On and Off There are two ways to turn on the camera: • The startup image displays briefly and the startup sound plays if enabled. The zoom lens extends and the camera is turned on in Record mode. • The camera is turned on in Playback mode. The zoom lens is not extended. To turn off the camera, press the Power button. See "Modes" on page 17 to know more about Record and Playback mode. Please remove the lens cover before doing Power on. Initial Settings When you turn on your
ページ19に含まれる内容の要旨
Using the LCD monitor The LCD monitor shows all important information regarding camera settings as well as the visual image of your image or video. The display on the LCD monitor is called the On Screen Display or OSD. LCD Monitor Layout Photo Mode Screen Layout No. Item Description 1 Record Mode Indicates the current mode. 2 Flash Indicates flash settings. 3 Self-timer Indicates drive mode settings. 4 Zoom indicator Displays zoom. 5 Shots remaining Indicates the remaining shots available. 6 B
ページ20に含まれる内容の要旨
Movie Mode Screen Layout Recording Layout No. Item Description 1 Key indicator Displays the commands on 4-way Navigation Control button 2 Recorded time Displays recorded time. 3 Recording status Indicates recording status. Playback Mode Screen Layout The Playback mode display varies depending on the type of image being viewed. Playback mode display of still images: No. Item Description 1 Playback mode Indicates playback mode. 2 Protect Indicates file is protected. 3 Voice memo Indicates voice
