ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
Instructions Getting to know your camera Use this camera in the following order. Thank you for buying a Samsung Digital Camera. To use this camera with a PC, install the Prior to using this camera, please read the user manual thoroughly. Set up the Software application software rst. After this has If you require After Sales service, please bring the camera and the cause been done, the stored images in the of the camera malfunction (such as battery, Memory card etc.) to the A/S camera ca
ページ3に含まれる内容の要旨
DANGER WARNING DANGER indicates an imminently hazardous situation which, if not WARNING indicates a potentially hazardous situation which, if not avoided, will result in death or serious injury. avoided, could result in death or serious injury. Do not attempt to modify this camera in any way. This may result in re, Do not use the ash in close proximity to people or animals. Positioning injury, electric shock or severe damage to you or your camera. Internal the ash too close to your subjec
ページ4に含まれる内容の要旨
CAUTION Contents CAUTION indicates a potentially hazardous situation which, if not 007 Package Contents READY avoided, may result in a minor or moderate injury. 007 Included Contents 007 Sold Separately Leaking, overheating, or burst battery could result in re or injury. 008 Identi cation of features – Use battery with the correct speci cation for the camera. 008 Front & Top – Do not short circuit, heat or dispose of battery in re. 009 Back – Do not insert the battery with the polarities r
ページ5に含まれる内容の要旨
Contents 026 Things to watch out for when taking 048 E (Effect) button: Photo Style Selector pictures 048 E (Effect) button: Image editing 027 Focus lock 048 Colour 049 Sharpness 027 Using the camera buttons to set the camera 049 Contrast 049 Saturation 027 POWER button 050 Using the LCD monitor to adjust the 028 Shutter button camera settings 028 Zoom W/T Lever 051 Command Lever 030 Command Lever 051 Flash Intensity 030 How to use the Command Lever 052 Quality 031 Function Description / Info
ページ6に含まれる内容の要旨
Contents 075 Deleting images 061 Info / Up button 075 DPOF 061 Play & Pause / Down button 078 Copy To Card 062 Left / Right / Menu / OK button 079 Sound menu 062 Print button 079 Sound 062 Delete button 079 Volume 063 E (Effect) button: Resize 079 Start up Sound 064 E (Effect) button: Rotating an image 079 Shutter Sound 064 E (Effect) button: Colour 080 Beep Sound 065 E (Effect) button: Image editing 080 AF Sound 065 ACB 080 Self Portrait 065 Red eye removal 081 Setup menu 066 Face Retouch 081
ページ7に含まれる内容の要旨
Contents 088 PictBridge PRINT 089 PictBridge: Picture Selection 089 PictBridge: Print Setting 090 PictBridge: Reset 090 Software notes SOFTWARE 091 System requirements 091 QuickTime Player 7.5 : H.264(MPEG4. AVC) playback Requirements 092 About the software 093 Setting up the application software 095 Starting PC mode 097 Removing the removable disk 098 Samsung Master 101 Setting up the USB Driver for MAC 101 Using the USB Driver for MAC 102 Speci cations APPENDIX 104 Important notes 106 Warnin
ページ8に含まれる内容の要旨
Package Contents Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. Parts and accessories illustrated below may differ from exact appearance. Included Contents User manual, AC adapter / Camera Camera strap Rechargeable battery Product warranty USB cable Software CD (see p.91~92) Sold Separately SD/SDHC/MMC Remote control Cam
ページ9に含まれる内容の要旨
Identi cation of features Front & Top Zoom T Lever (Digital zoom) Zoom W Lever (Thumbnail) Mode dial POWER button Flash Speaker AF sensor/ Self-timer lamp Remote control sensor Microphone Lens 008
ページ10に含まれる内容の要旨
Identi cation of features Back Shutter button Camera status lamp LCD monitor Command Lever USB / AV / DC terminal Fn / Delete button 5-function button Play mode / Print button E (Effect) button Camera strap 009
ページ11に含まれる内容の要旨
Identi cation of features Bottom 5 Function button Memory card slot Function Description / Information / Up button Flash / Self-timer / Left button Right button MENU / OK button Battery holder Macro /Play & Pause / Down button Battery chamber cover Battery chamber Tripod socket 010
ページ12に含まれる内容の要旨
Identi cation of features Self-timer lamp Icon Status Description When the USB cable is The lamp blinks and turns off when the printer inserted to a printer is ready to print a picture. – For the rst 7 seconds, the lamp blinks at 1 second intervals. When the printer is printing The lamp is off. Blinking – For the nal 3 seconds, the lamp blinks quickly The lamp turns on. at 0.25-second intervals. (The camera is focused on the subject) When the AF activates For the nal 2 seconds, the lamp
ページ13に含まれる内容の要旨
Connecting to a power source You should use the rechargeable battery SLB-10A supplied with the Recording Conditions camera. Be sure to charge the battery before using the camera. time SLB-10A rechargeable battery Speci cation Approx. 125 Using the fully charged battery Movie MIN 640x480 image size 30fps frame rate. Model SLB-10A Type Lithium Ion These gures are measured under Samsung’s standard conditions and Capacity 1050mAh shooting conditions and may vary depending on the user’s metho
ページ14に含まれる内容の要旨
Connecting to a power source Connecting the AC adapter with the USB cable can be used as an Important information about USB cable usage. AC cable, and you can charge the rechargeable battery with the AC Use a USB cable with the correct speci cation. cable. If the camera is connected to the PC through a USB hub: connect the camera directly to the PC. If the camera and other devices are connected to the PC at Using an AC cable: the same time: remove other device. Connect the AC adapter to
ページ15に含まれる内容の要旨
Connecting to a power source How to charge the rechargeable battery Charging LED of the AC Adapter Charging LED Being Charged Red LED is on Charging is complete Green LED is on Charging error Red LED is off or blinking Being discharged Orange coloured LED is on (Using the AC adapter) – If you insert the fully discharged battery to charge it, do not turn on the camera at the same time. This is because of the low battery capacity. Before inserting any cables or AC adapter, check the direction
ページ16に含まれる内容の要旨
Inserting the battery Inserting the memory card Insert the battery as shown. Insert the memory card as shown. – If the camera does not turn on - Turn off the camera’s power after you have inserted battery, before inserting the memory card. please check whether the battery - Have the front label of the is inserted with the correct polarity memory card facing toward the (+/-). front of the camera (Lens) and the – When the battery chamber cover card pins toward the back of the is opened, do
ページ17に含まれる内容の要旨
Instructions on how to use the memory card Be sure to format the memory card (see p.83) if you are using a newly If the memory card is subjected to any of the following, the recorded data purchased memory card for the rst time, if it contains data that the camera may become corrupted: cannot recognise, or if it contains images captured with a different camera. – When the memory card is used incorrectly. Turn off the camera power whenever the memory card is being inserted or – If the power
ページ18に含まれる内容の要旨
Instructions on how to use the memory card The camera can use SD/ SDHC Memory Cards and MMC (Multi When using a 1GB SD memory, the speci ed shooting capacity will be Media Cards). as follows. These gures are approximate as image capacities can be affected by variables such as subject matter and memory card type. Recorded Super Card pins Fine Normal 60FPS 30FPS 15FPS image size Fine 183 334 472 -- - Write protect 200 362 511 -- - switch -- - 252 442 613 Label Still -- - 252 445 619 ima
ページ19に含まれる内容の要旨
When using the camera for the rst time Charge the rechargeable battery fully before using the camera for the rst Setting up the date, time and date type time. 1. Select the [Date&Time] menu by When the camera is turned on for the rst time, a menu will be displayed pressing the Up/Down button and press DISPLAY in the LCD monitor to set date, time and language. This menu will not be the Right button. Language + Seoul, Tokyo displayed again after setting up the date, time and language.
ページ20に含まれる内容の要旨
LCD monitor indicator No. Description Icons Page The LCD monitor displays information about the shooting functions and selections. 9 ISO p.43 1 3 2 10 White Balance p.43~44 Face Detection · Self Portrait 1 1 11 p.45~46 4 ) · Blink Detection ·Smile Shot aa 5 12 Date/Time 2009/01/01 PM 01:00 p.82 bb ( 1/30 F3.3 1/30 F3.3 6 / d cc 13 Saturation/Colour p.49/p.48 * 7 & / e 14 Contrast/Face Retouch p.49/p.22 8 ^ f 9 p.49/p.48/ Sharpness/Photo Style /
