ページ1に含まれる内容の要旨
81379 Digital Camera
Owner’s Manual
© 2005 Sakar International, Inc. All rights reserved.
Windows and the Windows logo are registered trademarks of Microsoft Corporation. All other
trademarks are the property of their respective companies.
Table of Content
Introduction .............................................................................................................................. 2
Quick Look at Your Digital Camera ..........................................
ページ2に含まれる内容の要旨
Introduction Thank you for purchasing the 81379 digital camera. Everything you need to take quality Digital Photos is included with your camera. The key Features include • 2.1 Mega pixel Camera with choice of 3 Resolutions- 1600 x 1200 Pixels (UXGA) 1280 x 1024 Pixels (SXGA), 640 x 480 Pixels (VGA) • Web Cam resolution 320 x 240 Pixels • 8 X 16 MB internal memory • SD Memory Card Slot accepts any size SD compatible memory cards. The maximum size of the SD/MMC memory cards is 1G • B
ページ3に含まれる内容の要旨
Explanation of the Icons that Appear on the LCD Monitor Setting up your camera for use Install the batteries Your camera requires two AAA size alkaline batteries. Please follow the below steps to load the batteries before you taking photos. 1. Remove the battery cover by sliding it in the direction of the arrow. 2. Insert the batteries correctly as indicated by the polarity icons. 3. Close the battery cover. Note: Download the photo before replace battery. Otherwise, the photos
ページ4に含まれる内容の要旨
the memory card is different from the required format of the digital camera, the LCD panel of the digital camera will display either “C2” or “C1”. Press the shutter button twice and the digital camera will format the memory card. Once the formatting is finished, the digital camera will enter into normal mode. Note: Image files cannot be recorded or erased if a write-protect sticker is affixed to the SD/MMC card. Remove the SD/MMC Card 1. Press the card. The card will be leaped out
ページ5に含まれる内容の要旨
Please review the license terms and click the “Agree” button to continue. Let the “PhoTags Express” installer create the folder where the program will be installed to, and then click “Install”. Click “Finish” to let the “PhoTags Express” installer finish the installation program. This will automatically launch the Install shield for the camera driver. Click “Next” to continue. Once the program has finished installing you will be asked to restart your computer. Please do so. Congr
ページ6に含まれる内容の要旨
Operation Instruction Turn on the power Press the MODE button for about 3 second to turn on the power, and then operate after beep. Take Photo 1. Press the MODE button to power on your camera. 2. Hold the camera steadily and press the shutter button to take the photo. The camera will beep once after the image is saved. The number will appear on the LCD display. If the camera does not beep after a picture is taken or FUL appears on the LCD display, then the memory is full. Note: You
ページ7に含まれる内容の要旨
2. Press Shutter button within 5 seconds. The digits will keep flashing. 3. Press Shutter button within 5 seconds again. All of the photos in the camera are deleted. Delete the Last Photo 1. Repeatedly press MODE button to select the icon shown on the LCD display. 2. Press Shutter button within 5 seconds. The last photo in the camera is deleted. Turn Camera off 1. Press MODE button and hold for 3 seconds to turn off the power. Note: The camera will be off automatically if th
ページ8に含まれる内容の要旨
Regular camera mode 6. Exit settings Esc- exit the Set mode Flash OFF 1. Press MODE button to select the icon SET shown on the LCD display. 2. Press Shutter button within 5 seconds, and then click the Shutter button until you select shown on the LCD display. 3. Press MODE button until you select ESC. 4. Press the Shutter button within 5 seconds. Force-flash mode 1. Press MODE button to select the icon SET shown on the LCD display. 2. Press Shutter button within 5 seconds,
ページ9に含まれる内容の要旨
High resolution 3. Press MODE button to select ESC. 4. Press the Shutter button within 5 seconds. 1. Low Resolution - 640 x 480 pixels. 2. Standard Resolution- 1280 x 1024 pixels. 3. High Resolution- 1600 x 1200 pixels. Set Standard quality 1. Press MODE button to select the icon SET shown on the LCD display. 2. Press Shutter button within 5 seconds, and then click the Shutter button until you select standard quality shown on the LCD display. 3. Press MODE button until you
ページ10に含まれる内容の要旨
2. Press Shutter button within 5 seconds, and then click the Shutter button until you select shown on the LCD display. 3. Press MODE button to select ESC. 4. Press the Shutter button within 5 seconds. Camera mode 2. Press MODE button to select the icon SET shown on the LCD display. 2. Press Shutter button within 5 seconds, and then click the Shutter button until you select shown on the LCD display. 3. Press MODE button to select ESC. 4. Press the Shutter button within 5 second
ページ11に含まれる内容の要旨
6. The “PhoTags Express” application you installed will open in the “Get photos” wizard mode and will ask you to select the photos you want to transfer. Select your photos and click “Next” to continue. 7. Add Active Captions to your pictures. You can add a date, keywords, categories and more. Click “Next” to continue. 8. On the next screen, choose where you want to place your photos and click the “Finish” button to copy the photos to your computer. 9. All of the pictures you impor
ページ12に含まれる内容の要旨
3. Make sure that your camera is connected and turned ON. Double-click the “PhoTags Express” icon on your desktop to launch the “PhoTags Express” program. Click on the “Get Photos” button on the Main Menu. The “Device Selection” mode will appear. Select your camera device. Your camera or memory card will appear in the “Active devices” list as a “Removable disk”. Custom Copy Method This mode is used to manually select the photos you wish to copy to your computer. Selec
ページ13に含まれる内容の要旨
Add Active Captions to your pictures. With this feature, you can add a date, keywords and categories. Click “Next” to continue. On the next screen, choose where you want to place your photos on your computer. Click on “Finish” to copy the photos to the location you selected. All of the pictures you imported will appear in the “Select photos” main window. Express Copy Method Select this option if you want to have all the images transferred to the PC without the option to selec
ページ14に含まれる内容の要旨
Using Your Camera As A Web Cam IMPORTANT NOTE: Please set your camera to PC Camera mode before using the video conference/ web camera /AVI. Make sure the Camera is in PCC mode. Connect the camera to the computer. Open a Web Cam enabled application, such as Instant Messenger or Net Meeting. Position the camera. Web Cam Express Now that you have your camera installed you can use it to capture short movies called AVI files. These can be saved directly to your computer. The length of
ページ15に含まれる内容の要旨
Using camera for Video Conference You can use this camera as a webcam to chat with friends and family, sending live video feeds straight to them NOTE: In order to use this camera you must make sure that you have YAHOO MESSENGER Ver 5.5 or later. 1. Start Yahoo messenger. 2. Select the "tools" listing on the top of the toolbar. Go to the drop down menu and select the listing for "start my webcam". 3. You will see a window appear with your video that you are playing. Now people who ha
ページ16に含まれる内容の要旨
and your Camera Driver. After removing these programs, restart your computer. If your camera is connected, disconnect it. 2) Now, let's reinstall the software. Insert the CD that came with your camera. It should automatically run the installation3) Now restart your computer again. 4) Once your computer is back up, plug the camera into your computers USB port 5) Right-click on my computer icon and select properties. If you are running Windows 98, 98SE, or ME: Click on device manage
