ページ1に含まれる内容の要旨
Digital Camera/VTR
AJ- P
Operating Instructions
ページ2に含まれる内容の要旨
RBRC For your safety FCC NOTE: CAUTION This device complies with Part 15 of the FCC RISK OF ELECTRIC SHOCK Rules. To assure continued compliance follow DO NOT OPEN the attached installation instructions and do not make any unauthorized modifications. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). This equipment has been tested and found to NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. comply with the limits for a Class A digital
ページ3に含まれる内容の要旨
Contents Safety Precautions . . . . . . . . . . . . . . . . 2 Audio Input Preparations ÁUsing the Microphone Mounted to the General and Features . . . . . . . . . . . . . . 5 Main Unit. . . . . . . . . . . . . . . . . . . . . . . 37 ÁFeatures of the Camera Section . . . . . 5 ÁUsing the AJ-MC700P Microphone Kit ÁFeatures of the VTR Section . . . . . . . 8 (Option) Mounted to the Main Unit . . . 37 ÁSystem Configuration . . . . . . . . . . . . . 9 ÁMounting the AJ-MH700P Microphone Controls and T
ページ4に含まれる内容の要旨
Contents Displays Playback—Checking Recorded Contents ÁRemaining Battery Level and Audio ÁRec Review. . . . . . . . . . . . . . . . . . . . . 94 Level Displays. . . . . . . . . . . . . . . . . . . 60 ÁColor Playback . . . . . . . . . . . . . . . . . . 94 ÁVTR Section Operation/Status-Related Connection With an External VTR. . . . . 95 Displays . . . . . . . . . . . . . . . . . . . . . . . 60 Recording Simultaneously with the ÁTime Code-Related Displays . . . . . . . 61 Internal VTR and an Extern
ページ5に含まれる内容の要旨
General and Features The AJ-PD900W combines a color video camera, which features a 520,000-pixel high-sensitivity M-FIT 3-CCD configuration and an on-chip lens, with a DVCPRO format VTR which in turn fea- tures the latest compression technology in a single unit. In addition to the existing interlace signals (525i), progressive signals (525P) can also be record- ed. Either 16:9 or 4:3 can be selected as the screen aspect ratio, and the rate at which the sig- nals are recorded onto the VTR tape ca
ページ6に含まれる内容の要旨
Features High-performance viewfinder ÁThe high-resolution CRT projects a detailed picture which facilitates focus operations. ÁThe viewfinder employs a low flare CRT which makes the screen easy to see. ÁA center marker which indicates the center of the screen and a safety zone marker which indi- cates the effective screen region can be displayed by menu operations. ÁA large aperture allows the screen to be easily seen even when the operator’s eye is removed from the eyepiece. ÁThe eyepiece can e
ページ7に含まれる内容の要旨
Recording by an external VTR When an external VTR is connected using the 26-pin/12-pin output adaptor (option, AJ-YA900P), recording can be performed by the external VTR instead of the internal VTR. Remote control Connecting the Extension Control Unit (option, AQ-EC1) allows a portion of the camera section functions to be operated by remote control. –7–
ページ8に含まれる内容の要旨
Features Features of the VTR section Digital system The VTR section features a component digital recording system that employs the latest com- pression technology and non-compressed PCM recording for audio. This system provides supe- rior S/N, frequency band and waveform characteristics as well as reproduction of detailed areas, etc., and realizes even higher picture and sound quality. One of the following 6 modes can be selected for conducting recording and playback: 16:9P (50 Mbps), 4:3P (50 M
ページ9に含まれる内容の要旨
System Configuration 26P/12P Microphone kit Wireless Shoulder VTR cable VTR output AJ-MC700P microphone belt adaptor receiver AJ-YA900P WX-RA700 Multi connector cable SHAN-C12TCA Microphone holder AJ-MH700P Panasonic Battery Battery case AU-BP220 SHAN-B220 Lens Sony Battery (Bayonet type) NP-1 Fujinon/Canon Battery Battery case Panasonic Battery charger AU-M402H AU-BP402 AG-B425 5w EVF mount adaptor Anton Bauer Battery AJ-QVF900 Camera/VTR Battery case/ Sony Battery AJ-PD900W Battery holder BP-9
ページ10に含まれる内容の要旨
Controls and Their Functions 1 4 2 3 Power Supply Section e Battery holder The battery pack (option) made by Anton Bauer is mounted onto this holder. f DC IN (external power input) connector (XLR, 4P) The AJ-B75 AC adaptor (option) is plugged into this socket when the unit is to be operated by AC power. An external battery is plugged in when an external battery is to be used to operate the unit. g BREAKER (circuit breaker) button In order to protect the equipment, the circuit breaker is tripped
ページ11に含まれる内容の要旨
6 5 5 7 9 8 n q p o Accessory Mounting Section i Hook for mounting shoulder belt Attach the accessory shoulder belt to this hook. j Light shoe Mount the video light, etc. onto this shoe. k Lens mount (bayonet type) Mount the lens here. l Lens clamping lever Insert the lens into the lens mount k, and turn the lens mount ring using this lever to clamp the lens. m Lens mount cap Press up the lens clamping lever l to remove this cap. Keep the cap in place if the lens is not going to be mounted. n Le
ページ12に含まれる内容の要旨
Controls and Their Functions s Audio Function Section (1) r r AUDIO LEVEL CH1 (audio channel 1 recording level) control When the AUDIO SELECT CH1/CH2 switch u is set to MAN, the recording level of audio channel 1 can be adjusted by this control in addition to the AUDIO LEVEL CH1 control t on the side panel. s MIC IN (microphone input) jack (XLR, 3-pin) Connect an optional microphone to this jack. The power for the microphone is supplied from this jack. t AUDIO LEVEL CH1/CH2 (audio channel 1/2 re
ページ13に含まれる内容の要旨
| } ~ t u v ¡
w
x z y ¡
{ Audio Function Section (2) | ALARM (warning tone volume) control This adjusts the warning tone volume heard from the speaker ~ or the earphone connected to the PHONES jack ¡. When it is set to the lowest position, the warning tone is not audible. However, by making changes to the inside parts, the tone can be made audible even when the control is at its lowest position. } MONITOR (volume) control This adjusts the volume of the sound other than the warning tone—th
ページ14に含まれる内容の要旨
Controls and Their Functions ©
¢
£
¦
¤
¥
Shooting (Recording)/Playback Function Section (1) ¢ Viewfinder Black-and-white images can be seen in the viewfinder during recording and playback. Warn- ings and messages relating to the unit’s operating status and settings, zebra pattern, markers (safety zone marker, center marker), etc. can also be seen. £ PEAKING control This is used to adjust the contours of the images inside the viewfinder to facilitate focusing. It does not affect the camera’
ページ15に含まれる内容の要旨
«
¨
ª
§
¬
®
Shooting (Recording)/Playback Function Section (2) ¬ CC/ND FILTER (filter selector) knob This selects the filter to match the light source which is illuminating the subject. If the setting of this knob is changed when the menu display mode has been set to “3” (de- fault setting), the new setting will appear for about 3 seconds on the setting change message display area of the viewfinder screen. È The knob and filter settings are È Examples of filter settings to match listed
ページ16に含まれる内容の要旨
Controls and Their Functions ³
²
¯
°
±
Shooting (Recording)/Playback Function Section (3) ¯ OUTPUT (output signal selector)/AUTO KNEE switch This switch selects the video signals which are to be output from the camera unit to the VTR unit, viewfinder and video monitor. The AUTO KNEE function can be used when the images shot by the camera have been selected. È OUTPUT/AUTO KNEE switch setting positions BARS Color bar signals are output. The AUTO KNEE circuit is not activated. Set the switch t
ページ17に含まれる内容の要旨
µ
¶
´
³ ECU REMOTE (remote control) connector (6-pin) Connect the AQ-EC1 extension control unit (option) here. |Note{ The POWER switches on unit and extension control unit must be set to OFF before the re- mote control cable is connected or disconnected. ´ 26-pin/12-pin output adaptor (option) (See page 98 for mounting method.) The 26-pin/12-pin output adaptor AJ-YA900P (option) is mounted on this section. When the portable VTR is connected as the external VTR, recording can be performed simu
ページ18に含まれる内容の要旨
Controls and Their Functions »
º
¹
·
¸
Shooting (Recording)/Playback Function Section (4) · VTR START button When this pressed, recording commences; when it is pressed again, recording stops. This button has the same function as the VTR button on the lens side. ¸ VTR SAVE/STBY (tape protection) switch This selects the power supply status while the VTR recording is temporarily stopped (REC PAUSE). SAVE: This is the tape protection mode. The cylinder is stopped in the half-loading status. Com
ページ19に含まれる内容の要旨
¿
À
¼
¾
½
Á
¼ EJECT (cassette eject) button Press this to insert or eject the cassette. ½ REW (rewind) button Press this to rewind the tape. Its lamp lights during rewinding. If this button is pressed during playback, the playback images are rewound at approximately quadruple speed while the button is held down. ¾ FF (fast forward) button Press this to fast forward the tape. Its lamp lights during fast forwarding. If this button is pressed during playback, the playback images are fast forw
ページ20に含まれる内容の要旨
( ) ( ) ( ) Controls and Their Functions Ë
Ì
Í
Ç
Â
Ä
Å
Æ
Ã
Ï
Î
Î
Menu Operation Section  Setup card insertion slot The optional setup cards are inserted into this slot. à MENU SET/OFF switch This displays the setting menu on the viewfinder screen through VIDEO OUT connector. SET: The page on which the previous setting menu operations were completed appears on the viewfinder screen. (When the menu is used for the first time, the first of the pages which can be displayed appear
