ページ1に含まれる内容の要旨
Novem M Ma arch rch ber 1 200 200 998 0 0 • • • CI CI CIS S S- --1 1 164 4 44 4
CURRENT INFORMATION SUMMARY
Supplementary Information on
KODAK EKTAMAX RA
Professional Paper
KODAK EKTAMAX RA Professional Paper uses colored
hue of EKTAMAX RA Paper, but it will cause a change in
dyes to form black-and-white images in prints made from
contrast.
color and black-and-white negatives. It is designed for
If you are printing black-and-white negatives onto
processing in KODAK EKTACOLOR RA Chemicals
ページ2に含まれる内容の要旨
Effects of Viewing Conditions Effects of Processing Problems Under certain types of illumination, the hue of prints on Severe developer oxidation or low processor utilization will EKTAMAX RA Paper can appear warm. A silver-based produce a slightly pink (magenta) hue in images on black-and-white image reflects all frequencies of light EKTAMAX RA Paper. Extreme contamination of the equally, so a slight deficiency in one color of the viewing developer with bleach-fix will produce a green hue shi
ページ3に含まれる内容の要旨
Excess developer in the bleach-fix/ Procedure to Confirm Leuco Cyan Dye. If you suspect high bleach-fix pH that leuco cyan dye is the cause of a red image tone, you can Excessive amounts of developer in the bleach-fix may be bleach a processed print in FLEXICOLOR Bleach III due to inefficient squeegees in the developer or low Replenisher to confirm a leuco cyan dye condition. Follow bleach-fix replenishment. Any condition that allows the pH this procedure: of the bleach-fix to increase ca
ページ4に含まれる内容の要旨
Supplementary Information on KODAK EKTAMAX RA Professional Paper Leuco cyan dye/low bleach-fix pH After you apply this prescription, allow the solution to Leuco cyan dye is due to a low pH in the bleach-fix caused circulate for 15 to 20 minutes, and then process some test by a high replenishment rate or incorrect start-up (fresh tank) prints. If the red hue is reduced but not eliminated, repeat the mixing procedure. It results in a warm reddish image tone prescription once. If the red hue