ページ1に含まれる内容の要旨
VN-T16/U
HD IP CAMERA
INSTRUCTIONS
ページ2に含まれる内容の要旨
Contents Contents of this manual.................................................................................................2 Cautions and Warnings..................................................................................................2 FCC Compliance Statement..........................................................................................3 Manufacturer’ s Declaration of Conformance..............................................................3 Europe.............
ページ3に含まれる内容の要旨
Contents of this manual Windows, Internet Explorer, DirectX and FAT32 are registered trademarks of Microsoft Corporation in the U.S. Pentium is a registered trademark of Intel Corporation in the U.S. NVIDIA and GeForce are trademarks or registered trademarks of NVIDIA Corporation in the U.S. AMD, ATI and Radeon are trademarks of Advanced Micro Devices Inc. in the U.S. Product names of other companies described in this manual are trademarks or registered trademarks of the r
ページ4に含まれる内容の要旨
Connect only one camera to the power line, AC24V/DC12V. Do not share the power line with other Caution equipment. The power cable between power source and the camera must be under 3 m. When powering the camera from AC24V, a UPS source Caution should be considered to ensure satisfactory performance. FCC Compliance Statement Information to the user: This equipment has been tested and found to comply with the limits for a Class A digital device, Pursuant to Part 15 of the FCC Rul
ページ5に含まれる内容の要旨
1 About This Document This INSTRUCTIONS is designed to be a reference tool for the installation and operation your system including the camera’s features, functions and detailed explanation of the menu tree. Overview of Contents This document contains the following chapters: Chapter 2, Product Overview, introduces the main functions and system requirements of the camera. Chapter 3, Installation and Connections, provides detailed instructions on installing the camera and connecting
ページ6に含まれる内容の要旨
2 Product Overview Camera Parts and Definitions Camera Overview Camera Parts and Definitions 3 Safety Wire(Fall Prevention Wire, not provided) 1 2 Lens is not provided. 5
ページ7に含まれる内容の要旨
4 1. CS mount: connect the lens with the camera 2. Screw: lock Back focus Adjustment 3. Back focus Adjustment 4. Base: connect the camera with the tripod 5. SD card slot: insert a SD card into this slot for recording and storage 6. Video: not supported (for factory use only) 7. RJ45 Ethernet Connector/ PoE: insert the RJ45 cable for network connection. It also supports PoE (Power over Ethernet). 8. Default Button: reset all of the camera parameters to factory default by pressi
ページ8に含まれる内容の要旨
3 Installation and Connections This chapter describes the installation and connection of the Box Camera. Before You Begin Please read this INSTRUCTIONS carefully before you install and operate the camera. Unpack Everything HD IP Camera WARRANTY CARD SAFETY PRECAUTIONS QUICK GUIDE 8-PIN TERMINAL BLOCK for alarm input/output CD-ROM containing INSTRUCTIONS and IP Finder software Equipment Required The following tools might help you to complete the installation: Drill
ページ9に含まれる内容の要旨
Please check the items in accordance with the list on the warranty card. Finally you can remove the protective film of the camera. Mounting 1. Attach the camera to a pending mount. Insert the screws on the camera stand into either of the screw holes on the base. Then tighten them up. 2. Mount the camera onto the ceiling/wall and fasten it securely. 3. Connect the Safety Wire (Fall Prevention Wire, not supplied) to the camera and the wall/ceiling. To prevent the camera from falling
ページ10に含まれる内容の要旨
Hardware and Software Requirements Computer Windows XP or Windows 7 as OS Internet Explorer Version 6.0-8.0 CPU: Intel Pentium IV X2 2.4 GHz or equivalent AMD Memory: 1G or above Display adapter Support DirectX9 for example NVIDIA GeForce 6 Series above ATI Mobility Radeon 9500 above. Power Supply This camera requires a DC12V / AC24V / PoE power supply. Please make sure you use the correct power supply before connecting to the camera. Network Connector Please use the RJ45 netwo
ページ11に含まれる内容の要旨
2. Set the personal computer’s IP address. The camera’s default IP address is 192.168.0.2 and sub mask is 255.255.255.0. 3. Check that the camera and computer are connected by pinging the IP address you have set. To do this, start a command prompt (Windows: from the Start Menu, select Program. Then select Accessories and choose Command Prompt.) Type “Ping 192.168.0.2”. If the message “Reply from… ” appears, it means the connection is done. 4. Start Internet Explorer and enter IP
ページ12に含まれる内容の要旨
• In Windows 7 only, Click Tools è Internet Options è Security o Enable Protected Mode (require restarting Internet Explorer) è Unchecked 11
ページ13に含まれる内容の要旨
• Click Tools è Internet Options è Security è Custom level 12
ページ14に含まれる内容の要旨
• Modify the configuration of IE’s security setting as follow: Download signed ActiveX controls è Prompt (recommended) Download unsigned ActiveX controls è Prompt Initialize and script ActiveX not marked as safe for scripting è Prompt Automatic prompting for ActiveX controls è Enable 13
ページ15に含まれる内容の要旨
l Run ActiveX controls and plug-ins è Enable l Script ActiveX controls marked safe for scripting* è Enable 6. Type your setting IP address into the browser. 7. Then you should be able to see the camera image screen. 14
ページ16に含まれる内容の要旨
4 Overview of Navigation and Controls Live View Live view is designed for general users to control the camera. In the left list it displays: Full Screen: Set Full screen One shot: take a picture from live view Audio In: get audio and output from PC. This menu is appeared by setting of Audio. Audio Out: send audio and output from camera. This menu is appeared by setting of Audio. Size 1:1 Encoder No.1: Three streams are available for selection among H.264, MPEG-4 and MJP
ページ17に含まれる内容の要旨
Basic Figure 4-1 Basic Image Color Automatic Exposure 16
ページ18に含まれる内容の要旨
Figure 4-2 Automatic Exposure Automatic Exposure controls the light intensity of picture. There are four types for adjustment. You can select Manual, AES (Automatic Electronic Shutter), Flicker-free 50Hz and Flicker-free 60Hz for the camera depending on your application conditions. When choose the Manual, the Shutter Speed can be adjusted. Note: This camera controls shutter speed for automatic exposure. Level Set Automatic Exposure target from 1 to10. This function is working on
ページ19に含まれる内容の要旨
Figure 4-4 Brightness adjustment, Contrast, Saturation Shutter Speed Figure 4-5 Shutter Speed Set desired Shutter Speed from 1/25s to 1/10000s. When video type is PAL,the Shutter Speed can be set at 1/25, 1/50, 1/100, 1/120, 1/150, 1/200, 1/300, 1/500, 1/750, 1/1500, 1/5000 and 1/10000s. When video type is NTSC,the Shutter Speed can be set at 1/30, 1/60, 1/100, 1/120, 1/150, 1/200, 1/300, 1/500, 1/750, 1/1500, 1/5000 and 1/10000s. Manual Gain Set Manual Gain value from 0 to 24
ページ20に含まれる内容の要旨
R Gain, B Gain & D Gain Figure 4-8 R Gain, B Gain & D Gain Set manual gain value of R Gain, B Gain, and D Gain from 0 to 255. This function is applied for manual lens only. The red(R) gain is used to adjust the red color of the viewing image. It allows adjusting red gain manually according to user requirement, ranging from 0 to 255. The blue (B) gain is used to adjust the blue color of the viewing image. It allows adjusting blue gain manually according to user requirem
