ページ1に含まれる内容の要旨
DIGITAL VIDEO CAMERA
ENGLISH
CONTENTS
AUTOMATIC DEMONSTRATION 6
GR-DVL155
GETTING STARTED 7 – 13
RECORDING & PLAYBACK 14 – 22
RECORDING ................................ 15 – 18
Please visit our Homepage on the World Wide Web and
PLAYBACK .................................. 19 – 22
answer our Consumer Survey (in English only):
ADVANCED FEATURES 23 – 50
http://www.jvc-victor.co.jp/english/index-e.html
FOR RECORDING .......................... 24 – 31
For Accessories:
USING MENUS FOR
http://www.jvc-v
ページ2に含まれる内容の要旨
2 EN Dear Customer, Thank you for purchasing this digital video camera. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of this product. Using This Instruction Manual • All major sections and subsections are listed in the Table Of Contents on the cover page. • Notes appear after most subsections. Be sure to read these as well. • Basic and advanced features/operation are separated for easier reference. It is recommended that you .
ページ3に含まれる内容の要旨
EN 3 CAUTIONS: ● This camcorder is designed to be used with PAL-type colour television signals. It cannot be used for playback with a television of a different standard. However, live recording and LCD monitor/viewfinder playback are possible anywhere. ● Use the JVC BN-V408U/V416U/V428U battery packs and, to recharge them or to supply power to the camcorder from an AC outlet, use the provided multi-voltage AC Adapter and Power Cord. (An appropriate conversion adapter may be necessary to accommod
ページ4に含まれる内容の要旨
4 EN SAFETY PRECAUTIONS Do not point the lens or the viewfinder directly into the sun. This can cause eye injuries, as well as lead to the malfunctioning of internal circuitry. There is also a risk of fire or electric shock. CAUTION! The following notes concern possible physical damage to the camcorder and to the user. When carrying, be sure to always securely attach and use the provided shoulder strap. Carrying or holding the camcorder by the viewfinder and/or the LCD monitor can result in drop
ページ5に含まれる内容の要旨
EN 5 PROVIDED ACCESSORIES or AC Adapter AP-V10EG, Power Cord Battery Pack AP-V11EG or AP-V12EG BN-V408U Shoulder Strap Cable Adapter Lens Cap (See below for attachment) Core Filter x 1 Core Filter x 1 Audio/Video Cable (for optional S-Video cable (for PC Connection cable (ø3.5 mini-plug to pg. 6 for attachment) provided with optional RCA plug) HS-V16KITE software; pg. 6 for attachment) NOTE: In order to maintain optimum performance of the camcorder, provided cables may be equipped with one o
ページ6に含まれる内容の要旨
AUTO MANUAL MANUAL 6 EN How To Attach The Core Filter Attach the Core Filter(s) (if provided with your model pg. 5) to an optional cable(s). The Core Filter reduces interference. 123 3 cm Stopper Wind once Release the Run the cable through the Core Filter, leaving approx. Close the Core Filter until it stoppers on both 3 cm of cable between the cable plug and the Core Filter. clicks shut. ends of the Core Wind the cable once around the outside of the Core Filter Filter. as shown in the illustr
ページ7に含まれる内容の要旨
EN 7 GETTING STARTED GETTING STARTED CONTENTS Power.................................................. 8 – 9 Grip Adjustment ......................................... 10 Viewfinder Adjustment.................................. 10 Shoulder Strap Attachment ............................. 10 Tripod Mounting.......................................... 10 Date/Time Settings...................................... 11 Loading/Unloading A Cassette ......................... 12 Recording Mode Setting ...........
ページ8に含まれる内容の要旨
8 EN GETTING STARTED (cont.) BATT. RELEASE Button Power This camcorder’s 2-way power supply system lets you choose the most appropriate source of power. Do not use provided power supply units with other equipment. 1 CHARGING THE BATTERY PACK 3 1 Tilt the viewfinder upward 1. With the arrow on 2 the battery pack pointing downward, push the battery pack slightly against the battery pack mount 2, then slide down the battery pack until it locks in place 3. Power Switch 2 Set the Power Switch to “OF
ページ9に含まれる内容の要旨
EN 9 ATTENTION USING THE BATTERY PACK Before detaching the power source, make sure that Perform step 1 of “CHARGING THE BATTERY the camcorder’s power is turned off. Failure to do so PACK” ( pg. 8). can result in a camcorder malfunction. Approximate recording time NOTES: Battery pack LCD monitor on Viewfinder on ● Recording time is reduced significantly under the following conditions: BN-V408U 1 hr. 1 hr. 15 min. • Zoom or Record-Standby mode is engaged BN-V416U 2 hrs. 2 hrs. 30 min. repeatedly.
ページ10に含まれる内容の要旨
MANUAL AUTO 10 EN GETTING STARTED (cont.) Grip Adjustment 1 Separate the Velcro strip. Power Zoom Lever 2 Pass your right hand through the loop and grasp the grip. Recording 3 Adjust your thumb and fingers through the grip, to Start/Stop button easily operate the Recording Start/Stop button and Power Switch and Power Zoom Lever. Be sure to fasten the Velcro strip to your preference. Power Switch Viewfinder Adjustment 1 Set the Power Switch to “ ” or “ ” Dioptre Adjustment Control while pressing
ページ11に含まれる内容の要旨
MANUAL EN 11 MENU/BRIGHT Wheel Date/Time Settings Power Lamp The date/time is recorded onto the tape at all times, but its display can be turned on or off during playback ( pg. 36, 37). 1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch. The power lamp lights and the camcorder is turned on. 2 Press the MENU/BRIGHT wheel in to access the Menu Screen. 3 Rotate the MENU/BRIGHT wheel to select “ DISPLAY”. Press it and the DISPLAY Menu appears. Power Switch 4 Rot
ページ12に含まれる内容の要旨
12 EN GETTING STARTED (cont.) Loading/Unloading A Cassette Erase protection tab* The camcorder needs to be powered up to load or eject a cassette. 1 Slide and hold OPEN/EJECT in the direction of Make sure the window side is the arrow then pull the cassette holder cover open facing out. until it locks. The cassette holder opens automatically. • Do not touch internal components. 2 Insert or remove a tape and press “PUSH HERE” Cassette holder to close the cassette holder. • Once the cassette holde
ページ13に含まれる内容の要旨
MANUAL EN 13 MENU/BRIGHT Wheel Recording Mode Setting Power Lamp Set the tape recording mode depending on your preference. 1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch. The power lamp lights and the camcorder is turned on. 2 Press the MENU/BRIGHT wheel in. The Menu Screen appears. 3 Rotate the MENU/BRIGHT wheel to select “ CAMERA” and press it. The CAMERA Menu appears. Power Switch 4 Rotate the MENU/BRIGHT wheel to select “REC MODE” and press it. The Su
ページ14に含まれる内容の要旨
14 EN RECORDING & PLAYBACK RECORDING & PLAYBACK CONTENTS RECORDING ................................. 15 – 18 Basic Recording..................................... 15 Journalistic Shooting ............................... 16 Self-Recording ...................................... 16 Operation Mode .................................... 16 Zooming ............................................ 17 Time Code ........................................... 18 PLAYBACK ................................... 19 – 22
ページ15に含まれる内容の要旨
AUTO MANUAL AUTO MANUAL EN 15 RECORDING Power lamp Basic Recording Power Switch NOTE: You should already have performed the procedures listed below. If not, do so before continuing. ● Power ( pg. 8) ● Grip Adjustment ( pg. 10) ● Viewfinder Adjustment ( pg. 10) ● Load A Cassette ( pg. 12) ● Recording Mode Setting ( pg. 13) 1 Remove the lens cap. During shooting 2 Set the Power Switch to “ ” or “ ” Lock Button while pressing down the Lock Button located on the Recording Start/Stop Button swit
ページ16に含まれる内容の要旨
MANUAL MANUAL AUTO AUTO AUTO MANUAL 16 EN RECORDING (cont.) JOURNALISTIC SHOOTING In some situations, different shooting angles may Self- provide more dramatic results. Hold the camcorder in Recording the desired position and tilt the LCD monitor in the most convenient direction. It can rotate 270° (90° downward, 180° upward). SELF-RECORDING You can shoot yourself while viewing your own image in the LCD monitor. Open the LCD monitor and tilt it upward 180° so that it faces forward, then point t
ページ17に含まれる内容の要旨
EN 17 Zoom in (T: Telephoto) FEATURE: Zooming 1xWT PURPOSE: 1x 0WT To produce the zoom in/out effect, or an instanta- 2x 0WT 4x 0WT neous change in image magnification. OPERATION: Zoom In Slide the Power Zoom Lever towards “T”. Zoom Out Zoom out (W: Wide angle) Slide the Power Zoom Lever towards “W”. The further you slide the Power Zoom Lever, the Zoom display quicker the zoom action. NOTES: 1x 0WT ● Focusing may become unstable during Zooming. In this case, set the zoom while in Record-Standb
ページ18に含まれる内容の要旨
AUTO MANUAL 18 EN RECORDING (cont.) Time Code During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback. If recording starts from a blank portion, the time code begins counting from “00:00:00” (minute:second:frame). If recording starts from the end of a previously recorded scene, the time code continues from the last time code number. To perform Random Assemble Editing ( pg. 43 – 47), time code is necessary. If
ページ19に含まれる内容の要旨
EN 19 PLAYBACK Stop Button (5) Normal Playback Rewind Button (2) 1 Load a tape ( pg. 12). Play/Pause Button (4/6) 2 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch. To start playback, Fast-Forward Button (3) press 4/6. • To stop playback, press 5. Power Zoom Lever (VOL.) • Press 2 to rewind, or 3 to fast-forward the tape during Stop mode. To Control The Speaker Volume . . . ..... slide the Power Zoom Lever (VOL.) towards “+” to turn up the volume, or tow
ページ20に含まれる内容の要旨
20 EN PLAYBACK (cont.) Connections Use the provided Audio/Video cable and optional S-Video cable. To TV or VCR To AV When the S-Video cable is not used. Audio/Video cable Yellow to [mini-plug to RCA TV Connector cover* VIDEO IN plug] (provided) White to AUDIO L IN** Red to AUDIO R IN** To S-VIDEO VCR S-Video cable To S-VIDEO IN (optional) * When connecting the cables, open this cover. ** The Audio cable is not required for watching still images only. If your TV/VCR has a 21-pin connector Use th
