ページ1に含まれる内容の要旨
ENGLISH ESPAÑOL
LYT1776-001A
EN SP
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
Dear Customer,
DIGITAL VIDEO CAMERA
Thank you for purchasing this
VIDEOCÁMARA DIGITAL
digital video camera. Before
use, please read the safety
information and precautions
GR-DA30U
contained in pages 2 – 4 to
ensure safe use of this product.
Estimado cliente:
Gracias por comprar esta
videocámara digital. Antes de
usarla, lea la información de
seguridad y las precauciones
contenidas en las páginas 2 – 4
para garantiz
ページ2に含まれる内容の要旨
2 EN Read This First! � Before recording important video, be sure � Remember that this camcorder is intended to make a trial recording. for private consumer use only. Play back your trial recording to make sure Any commercial use without proper the video and audio have been recorded permission is prohibited. (Even if you record properly. an event such as a show, performance or � We recommend exhibition for personal enjoyment, it is strongly cleaning your video recommended that you obtain
ページ3に含まれる内容の要旨
ENGLISH EN 3 Safety Precautions When the equipment is installed in a cabinet CAUTION or on a shelf, make sure that it has sufficient RISKOFELECTRICSHOCK space on all sides to allow for ventilation DONOTOPEN (10 cm (3-15/16") or more on both sides, on CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, top and at the rear). DO NOT REMOVE COVER (OR BACK). Do not block the ventilation holes. NO USER-SERVICEABLE PARTS INSIDE. (If the ventilation holes are blocked by a REFER SERVICING TO
ページ4に含まれる内容の要旨
4 EN IMPORTANT SAFETY INSTRUCTIONS Do not point the lens directly into the sun. This can cause eye injuries, as well as lead to the 1. Read these instructions. malfunctioning of internal circuitry. There is 2. Keep these instructions. also a risk of fire or electric shock. 3. Heed all warnings. 4. Follow all instructions. CAUTION! 5. Do not use this apparatus near water. The following notes concern possible physical 6. Clean only with dry cloth. damage to the camcorder and to the user. 7. Do n
ページ5に含まれる内容の要旨
ENGLISH Contents EN 5 Getting Started 6 Advanced Features 19 Accessories ....................................... 6 Menus for detailed adjustment .........19 Attach the Lens Cap ..................................6 Changing The Menu Settings .................19 Attach the Core Filter ................................6 Recording Menus ...............................20 Attach the Shoulder Strap .........................7 Playback Menus .................................22 Grip Adjustment .............
ページ6に含まれる内容の要旨
6 EN Getting Started Accessories or or Audio/Video Cable (ø3.5 mini-plug to RCA plug) AC Adapter AP-V14U or AP-V18U AB Battery Pack Shoulder Strap Lens Cap Core Filter for Cables BN-VF808U ( 7) A: Audio/Video Cable B: AC Adapter Note: Make sure to use the provided cables for connections. Do not use any other cables. Attach the Lens Cap To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration. Place here during recording. Attach the Core Filter Attach the
ページ7に含まれる内容の要旨
ENGLISH Getting Started EN 7 Attach the Shoulder Strap Peel off the pad and thread the Thread the strap through the Position the buckle near the end of the strap through the buckle, adjust its length, and eyelet and reattach the pad. eyelet. use the strap guide to fi x it in place. Strap Guide Buckle Eyelet Grip Adjustment Open the pad and make grip adjustments. � Before making the adjustment, remove any security tags that may be attached to the velcro. T ripod Mounting To attach the camcorder
ページ8に含まれる内容の要旨
DV 8 EN Getting Started Index 5 U 7 PLAY 6 OFF REC 8 9 O W T N S R L M a 1 X Y 0 2K34 P Q BATT V Z How to adjust the LCD Monitor Slide the LCD monitor in the most convenient position. It can slide 30° (15° downward, 15° upward) Note: Colored bright spots may appear all over the LCD monitor. 30˚ However, this is not a malfunction. G GR-DA30US_EN.indb 8 R-DA30US_EN.indb 8 7 7/11/2007 6:00:19 PM /11/2007 6:00:19 PM
ページ9に含まれる内容の要旨
ENGLISH Getting Started EN 9 Controls Other parts Control Lever O LCD Monitor ( 8) : Left/Rewind (3) ( 16)/Quick Review P Shoulder Strap Eyelet ( 7) [QUICK REVIEW] ( 14) Q Grip Strap ( 7) : Right/Fast-Forward (5) ( 16)/ R Camera Sensor 16:9 Wide Screen Button [16:9] ( 13)/ (Be careful not to cover this area, a sensor : Up/Play/Pause (U/9) ( 16)/ necessary for shooting is built-in here) Manual Focus [FOCUS] ( 24) S Stereo Microphone : Down/Stop (8) ( 16)/Backlight T Lens Compensa
ページ10に含まれる内容の要旨
10 EN Getting Started LCD Monitor Indications Date/Time ( 21) During Video Recording Manual Focus Adjustment Indicator ( 24) Time Code ( 21) 2 LP 16:9 – – –min During Video Playback M REC 3 WH LP 12BIT DV IN L SOUND 12BIT 11:13AM 15:55 DEC. 6.2007 3 VOLUME 11:13AM Battery Remaining Power Indicator 20 : 21 : 25 DEC. 6.2007 Operation Mode ( 9) A : Auto Mode M : Manual Mode : Night-Alive Indicator ( 28) Battery Remaining Power Indicator : Gain Up Mod
ページ11に含まれる内容の要旨
ENGLISH Getting Started EN 11 Power Charging The Battery Pack To detach the battery pack 1 Set the Power Switch to “OFF” ( 9). Slide and hold battery release button BATT. ( 9), then remove the battery pack. 2 2 Open the battery cover. Charging/recording time (approx.) Press “w OPEN” and slide the battery cover off the camcorder in the direction as Maximum illustrated below. Required Continuous Battery pack charging time Recording Time BN-VF808U 1hr. 30 min. 1 hr. 55 min. (Provided) BN-V
ページ12に含まれる内容の要旨
12 EN Getting Started 1 1 Set the Power Switch to “REC” or “PLAY” Data Battery System ( 9). You can check the remaining battery power � If set to “REC”, the recording mode should and the recordable time. be set to “ M” ( 9). 1 1 Set the Power Switch to “REC” or “PLAY” 2 Press MENU. ( 9). 3 Select “SYSTEM”, press SET or . 2 2 Press DATA, and the battery status screen 4 Select “LANGUAGE”, press SET or . appears. 5 5 Select the desired language, press SET or . BATTERY CONDITION 6 6 Pres
ページ13に含まれる内容の要旨
ENGLISH Getting Started EN 13 Make sure the window 1 Brightness Adjustment Of side is facing out. Erase OPEN/ The Display protection EJECT tab 1 Select Cassette holder Cassette holder cover 5 2 SET 3 3 Close the cassette holder cover fi rmly until 6 Perform steps 1 1 – 2 2 in “Language Settings” it locks into place. ( 12). 1 Select “DISPLAY”, press SET or . Notes: 2 Select “BRIGHT”, press SET or . � If you wait a few seconds and the cassette holder does not open, close the cassette 3
ページ14に含まれる内容の要旨
14 EN Recording & Playback USE CLEANING CASSETTE Basic Recording Appears if dirt is detected on the heads during Before continuing, perform the procedures listed recording. Use an optional cleaning cassette below: ( 2). � Power ( 11). � Loading A Cassette ( 13). � Remove the lens cap ( 6). � Select videos at 4:3 size or 16:9 (wide) size Tape Remaining Time ( 13). Approximate tape remaining time appears on the display. “– – – min” means the camcorder Recording Start/ Power Switch is c
ページ15に含まれる内容の要旨
ENGLISH Recording & Playback EN 15 Zoom T ime Code Zoom out Zoom in During recording, a time code is recorded on the tape. This code is to confi rm the location of the recorded scene on the tape during playback. Display W: Wide angle T: Telephoto � You can zoom in up to 30X by using the Minutes optical zoom. Seconds � Zoom magnifi cation over 30X is done through digital image processing, and Frames* is therefore called digital zoom. Digital (30 frames = 1 zooming is possible up to 800X
ページ16に含まれる内容の要旨
16 EN Recording & Playback HDV Normal Playback Appears when pictures recorded in the HDV format are detected. The pictures in the – VOL.+ W T HDV format cannot be played back with this Power Switch camcorder. SET VOL. +/- Still Playback 6 Pauses during video playback. 1 Press 6 during playback. MENU 2 To resume normal playback, press 6 again. 1y 7 � If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is 1 Load a cassette ( 13). automatically engaged. 2 2
ページ17に含まれる内容の要旨
ENGLISH Recording & Playback EN 17 Variable Shuttle Search Blank Search Allows variable-speed search in either Helps you fi nd where you should start direction during video playback. recording in the middle of a tape to avoid time code interruption ( 15). 1 During playback, press 5 once or twice for forward search, or 3 once or twice for 1 Set the power switch to “PLAY” ( 9). reverse search. 2 Press MENU. 35 3 Select “TAPE”, press SET or . x-10 x-3 x3 x10 4 Select “BLANK SEARCH”, press SET
ページ18に含まれる内容の要旨
18 EN Recording & Playback 1 Make sure all units are turned off. Connections To A TV Or VCR 2 2 Connect the camcorder to a TV or VCR as shown in the illustration. If using a VCR, go to step 3 3. If not, go to step 4 4. 3 3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual. 4 4 Turn on the camcorder, the VCR and the TV. 5 5 Set the VCR to its AUX input mode, and To AV set the TV to its VIDEO mode. connector 6 6 Start playback on the camcorder ( 16). � Pleas
ページ19に含まれる内容の要旨
ENGLISH Menus for detailed adjustment EN 19 4 4 Select the desired selection, press SET or Changing The Menu Settings . This camcorder is equipped with an easy-to- Example: WIPE/FADER menu. use, on-screen menu system that simplifi es WIPE/FADER many of the more detailed camcorder settings OFF OFF WH WHITE ( 19 – 23). BLACK Power Switch SLIDE SCROLL 1 Select 5 5 Select the desired setting, press SET or . Selection is completed. 6 6 Press MENU. The Menu Screen closes. MENU � Press wheneve
ページ20に含まれる内容の要旨
20 EN Menus for detailed adjustment Recording Menus The FUNCTION and CAMERA menu settings can be changed only when the Power Switch is set to “REC”. Menus Settings: [ ] = Factory-preset WIPE/FADER ( 27), “Wipe or Fader Effects”. PROGRAM AE ( 27, 28), “Program AE, Effects And Shutter Effects”. EFFECT ( 27, 28), “Program AE, Effects And Shutter Effects”. EXPOSURE ( 24), “Exposure Control”. W. BALANCE ( 26), “White Balance Adjustment”. SHUTTER ( 27, 28), “Program AE, Effects And Shutter Effe
