ページ1に含まれる内容の要旨
ENGLISH
CONTENTS
DIGITAL VIDEO CAMERA
AUTOMATIC DEMONSTRATION 6
GETTING STARTED 7 – 14
TAPE
GR-DVL767
RECORDING & PLAYBACK 15 – 24
TAPE RECORDING ........................ 16 – 20
TAPE PLAYBACK .......................... 21 – 24
GR-DVL367
MEMORY CARD
RECORDING & PLAYBACK 25 – 36
MEMORY CARD RECORDING ......... 26 – 27
GR-DVL365
MEMORY CARD PLAYBACK ............ 28 – 29
ADVANCED FEATURES .................... 30 – 36
ADVANCED FEATURES 37 – 66
GR-DVL160
FOR RECORDING ........................
ページ2に含まれる内容の要旨
2 EN Dear Customer, Thank you for purchasing this digital video camera. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of this product. Using This Instruction Manual • All major sections and subsections are listed in the Table Of Contents on the cover page. • Notes appear after most subsections. Be sure to read these as well. • Basic and advanced features/operation are separated for easier reference. It is recommended that you .
ページ3に含まれる内容の要旨
EN 3 CAUTIONS: ● This camcorder is designed to be used with PAL-type colour television signals. It cannot be used for playback with a television of a different standard. However, live recording and LCD monitor/viewfinder playback are possible anywhere. ● Use the JVC BN-V408U/V416U/V428U battery packs and, to recharge them or to supply power to the camcorder from an AC outlet, use the provided multi-voltage AC Adapter and Power Cord. (An appropriate conversion adapter may be necessary to accommod
ページ4に含まれる内容の要旨
4 EN SAFETY PRECAUTIONS Do not point the lens or the viewfinder directly into the sun. This can cause eye injuries, as well as lead to the malfunctioning of internal circuitry. There is also a risk of fire or electric shock. CAUTION! The following notes concern possible physical damage to the camcorder and to the user. When carrying, be sure to always securely attach and use the provided shoulder strap. Carrying or holding the camcorder by the viewfinder and/or the LCD monitor can result in drop
ページ5に含まれる内容の要旨
EN 5 PROVIDED ACCESSORIES or AAA (R03) Battery Power Cord Battery Pack x 2 (for remote AC Adapter AP-V10EG, BN-V408U control unit) AP-V11EG or AP-V12EG or Cable Adapter Lens Cap Shoulder Strap Remote CD-ROM (See below for Control Unit (GR-DVL767/DVL367/ attachment) RM-V717U DVL365 only) USB Cable (GR-DVL767/ Memory Card 8 MB DVL367/DVL365 only) (GR-DVL767/DVL367/ Audio/Video Cable Editing Cable DVL365 only) (Already (ø3.5 mini-plug to inserted in the GR-DVL160: RCA plug) camcorder) One plug has
ページ6に含まれる内容の要旨
AUTO MANUAL MANUAL 6 EN How To Attach The Core Filter Attach the Core Filter(s) (if provided with your model pg. 5) to an optional cable(s). The Core Filter reduces interference. 123 3 cm Stopper Wind once Release the Run the cable through the Core Filter, leaving approx. Close the Core Filter until it stoppers on both 3 cm of cable between the cable plug and the Core Filter. clicks shut. ends of the Core Wind the cable once around the outside of the Core Filter Filter. as shown in the illustr
ページ7に含まれる内容の要旨
EN 7 GETTING STARTED GETTING STARTED CONTENTS Power.................................................. 8 – 9 Grip Adjustment ......................................... 10 Viewfinder Adjustment.................................. 10 Shoulder Strap Attachment ............................. 10 Tripod Mounting.......................................... 10 Date/Time Settings...................................... 11 Loading/Unloading A Cassette ......................... 12 Recording Mode Setting ...........
ページ8に含まれる内容の要旨
8 EN GETTING STARTED (cont.) BATT. RELEASE Button Power This camcorder’s 2-way power supply system lets you choose the most appropriate source of power. Do not use provided power supply units with other 1 equipment. CHARGING THE BATTERY PACK 3 2 1 Tilt the viewfinder upward 1. With the arrow on the battery pack pointing downward, push the battery pack slightly against the battery pack mount 2, then slide down the battery pack until it locks in place 3. Power Switch 2 Set the Power Switch to “OF
ページ9に含まれる内容の要旨
EN 9 ATTENTION USING THE BATTERY PACK Before detaching the power source, make sure that Perform step 1 of “CHARGING THE BATTERY the camcorder’s power is turned off. Failure to do so PACK” ( pg. 8). can result in a camcorder malfunction. Approximate recording time NOTES: ● Recording time is reduced significantly under the following conditions: Battery pack LCD monitor on Viewfinder on • Zoom or Record-Standby mode is engaged repeatedly. BN-V408U 1 hr. 1 hr. 15 min. (35
ページ10に含まれる内容の要旨
MANUAL AUTO 10 EN GETTING STARTED (cont.) Grip Adjustment Power Zoom Lever 1 Separate the Velcro strip. 2 Pass your right hand through the loop and grasp the grip. Recording 3 Adjust your thumb and fingers through the grip, to Start/Stop button easily operate the Recording Start/Stop button and Power Switch and Power Zoom Lever. Be sure to fasten the Velcro strip to your preference. Power Switch Viewfinder Adjustment 1 Set the Power Switch to “ ” or “ ” Dioptre Adjustment Control while pressing
ページ11に含まれる内容の要旨
MANUAL EN 11 MENU/BRIGHT Wheel Date/Time Settings Power Lamp The date/time is recorded onto the tape at all times, but its display can be turned on or off during playback ( pg. 50, 51). 1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch. The power lamp lights and the camcorder is turned on. 2 Press the MENU/BRIGHT wheel in to access the Menu Screen. 3 Rotate the MENU/BRIGHT wheel to select “ DISPLAY”. Press it and the DISPLAY Menu appears. Power Switch 4 Rot
ページ12に含まれる内容の要旨
12 EN GETTING STARTED (cont.) Loading/Unloading A Cassette Erase protection tab* The camcorder needs to be powered up to load or eject a cassette. Make sure the window side is 1 Slide and hold OPEN/EJECT in the direction of facing out. the arrow then pull the cassette holder cover open until it locks. The cassette holder opens automatically. • Do not touch internal components. Cassette holder 2 Insert or remove a tape and press “PUSH HERE” to close the cassette holder. • Once the cassette holde
ページ13に含まれる内容の要旨
MANUAL EN 13 MENU/BRIGHT Wheel Recording Mode Setting Power Lamp Set the tape recording mode depending on your preference. 1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch. The power lamp lights and the camcorder is turned on. 2 Press the MENU/BRIGHT wheel in. The Menu Screen appears. 3 Rotate the MENU/BRIGHT wheel to select “ CAMERA” and press it. The CAMERA Menu appears. Power Switch 4 Rotate the MENU/BRIGHT wheel to select “REC MODE” and press it. The Su
ページ14に含まれる内容の要旨
MANUAL 14 EN GETTING STARTED (cont.) MENU/BRIGHT Wheel Power Switch Display QUAL I TY – FINE IMAGE S I ZE –1X 024876 Lock Button REC SELECT – Card Cover Label Clipped edge Power Lamp RETURN Memory card Loading A Memory Card Picture Quality/Image Size Setting (GR-DVL767/DVL367/DVL365 only) (GR-DVL767/DVL367/DVL365 only) The provided memory card is already inserted in the The Picture Quality/Image Size can be selected to camcorder when you receive the camcorder. best match your needs. Refer to th
ページ15に含まれる内容の要旨
EN 15 TAPE RECORDING & PLAYBACK TAPE RECORDING & PLAYBACK CONTENTS TAPE RECORDING ......................... 16 – 20 Basic Recording..................................... 16 Journalistic Shooting ............................... 17 Self-Recording ...................................... 17 Operation Mode .................................... 17 Zooming ............................................ 18 Video Light ......................................... 19 Time Code ..................................
ページ16に含まれる内容の要旨
MANUAL AUTO MANUAL AUTO 16 EN TAPE RECORDING Basic Recording Power lamp NOTE: Power Switch You should already have performed the procedures listed below. If not, do so before continuing. ● Power ( pg. 8) ● Grip Adjustment ( pg. 10) ● Viewfinder Adjustment ( pg. 10) ● Load A Cassette ( pg. 12) ● Recording Mode Setting ( pg. 13) 1 Remove the lens cap. During GR-DVL767/DVL367/DVL365 only: Press PUSH shooting OPEN, open the LCD monitor and set the VIDEO/ Lock Button MEMORY Switch to “VIDEO”. Re
ページ17に含まれる内容の要旨
MANUAL AUTO MANUAL AUTO AUTO MANUAL AUTO MANUAL EN 17 JOURNALISTIC SHOOTING In some situations, different shooting angles may Self- Recording provide more dramatic results. Hold the camcorder in the desired position and tilt the LCD monitor in the most convenient direction. It can rotate 270° (90° downward, 180° upward). SELF-RECORDING You can shoot yourself while viewing your own image in the LCD monitor. Open the LCD monitor and tilt it upward 180° so that it faces forward, then point the lens
ページ18に含まれる内容の要旨
18 EN TAPE RECORDING (cont.) Zoom in (T: Telephoto) FEATURE: Zooming 1xWT PURPOSE: 1x 0WT 2x 0WT To produce the zoom in/out effect, or an instanta- 4x 0WT neous change in image magnification. OPERATION: Zoom In Slide the Power Zoom Lever towards “T”. Zoom Out Zoom out (W: Wide angle) Slide the Power Zoom Lever towards “W”. The further you slide the Power Zoom Lever, the quicker the zoom action. Zoom display NOTES: 1x 0WT ● Focusing may become unstable during Zooming. In this case, set the zo
ページ19に含まれる内容の要旨
EN 19 FEATURE: Video Light PURPOSE: To brighten the scene when natural lighting is too dim. OPERATION: Set LIGHT OFF/AUTO/ON as required: OFF : Turns off the light. AUTO : Automatically turns on the light when the camcorder senses insufficient lighting on LIGHT OFF/AUTO/ON Switch the subject. (Open the LCD monitor to access this switch.) ON : Always keeps the light on as long as the camcorder is turned on. The video light can only be used with the camcorder’s power on. It is recommended to s
ページ20に含まれる内容の要旨
AUTO MANUAL 20 EN TAPE RECORDING (cont.) Time Code During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback. If recording starts from a blank portion, the time code begins counting from “00:00:00” (minute:second:frame). If recording starts from the end of a previously recorded scene, the time code continues from the last time code number. To perform Random Assemble Editing ( pg. 58 – 62), time code is necessa
