ページ1に含まれる内容の要旨
TM/TMC-4200GE Progressive Scan Cameras
Operation Manual
10394
See the Possibilities
Rev. A
ページ2に含まれる内容の要旨
Page ii
ページ3に含まれる内容の要旨
R G E N G I G I A S A M S T I S E O D C E Page iii Notice The material contained in this manual consists of information that is proprietary to JAI Inc., and may only be used by the pur- chasers of the product. JAI Inc. makes no warranty for the use of its product and assumes no responsibility for any errors which may appear or for damages resulting from the use of the information contained herein. JAI Inc. reserves the right to make changes without notice. Microsoft, Windows XP, Windows 2000,
ページ4に含まれる内容の要旨
Page iv
ページ5に含まれる内容の要旨
Page v Table of Contents Table of Contents 1 Software Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 Scope of the Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 1.2 Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 1.3 Gigabit Ethernet Camera Interface . . . . . . . . . . . . . . . . . . . . . . . . . . .1 1.4 Software Installation . . . . . . . . . . . . . . . . . . . . . . . . .
ページ6に含まれる内容の要旨
Page vi Table of Contents 6 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 6.1 Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 6.1.1 Before Installing Dual-Tap AccuPiXEL Series Camera-Control Software . 32 6.1.2 Installing the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 6.1.3 Uninstalling the Software . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ7に含まれる内容の要旨
Page vii Table of Contents 9.3.2 Programmable Exposure-Continuous Mode . . . . . . . . . . . . . . . . . . . . . . . . . 64 9.3.3 Asynchronous No Shutter Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 9.3.4 Asynchronous Programmable Exposure Mode . . . . . . . . . . . . . . . . . . . . . . 65 9.3.5 Pulse Width Control Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 9.3.6 Particle Imaging Velocimetry Fixed Exposure Mode . . . . . . .
ページ8に含まれる内容の要旨
Page viii Table of Contents
ページ9に含まれる内容の要旨
Page ix List of Figures List of Figures FIGURE 1. Scanning for Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 FIGURE 2. Intel Pro Install Choices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 FIGURE 3. Change and Remove Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 FIGURE 4. Network Device Finder Window . . . . . . . . . . . . . . . . . . . . .
ページ10に含まれる内容の要旨
Page x List of Figures FIGURE 48. Please contact JAI Inc. for password access. The password allows access to the EEPROM to rewrite factory default settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 FIGURE 49. 12-Pin Connector Pinouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 FIGURE 50. GigE Ethernet Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 FIGURE 51. 12P-02S Interface Cable
ページ11に含まれる内容の要旨
Page xi List of Tables List of Tables TABLE 1. Hirose Connector, Pin Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 TABLE 2. GPIO Look-Up Table Input Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 TABLE 3. GPIO Look-Up Table Output Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 TABLE 4. TM/TMC-4200 Command List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 TA
ページ12に含まれる内容の要旨
Page xii List of Tables
ページ13に含まれる内容の要旨
Page 1 TM-4200GE Software TM-4200GE Software Operation Manual 1 Software Introduction 1.1 Scope of the Document This manual describes how to access and use features of the JAI Gigabit Ethernet camera, the TM- 4200GE. The camera’s different operation modes are described in the hardware section of this manual, which begins on page 31. The TM-4200GE series consists of the TM-4200GE (monochrome) and the TMC-4200GE (color). Unless otherwise noted, all information contained in this manual is relevan
ページ14に含まれる内容の要旨
Page 2 TM-4200GE Software Note: Refer to the section on time-outs and packets in the Cam2Net User’s Manual for more information on packet sizes for point-to-point and networked applications. Communication with a GigE camera is completely transparent to the user, so if you are used to working with Camera Link® and/or the JAI Cam2Net adapter, you will find it very easy to migrate. The TM-4200GE camera has internal frame memory, which sends only the actual image data using the Gigabit Ethernet i
ページ15に含まれる内容の要旨
Page 3 TM-4200GE Software FIGURE 1. Scanning for Drivers 4. The Driver Installation Tool dialog box appears with a listing of all NIC cards on the system. 5. Right click on the net driver desired for the camera. If the driver is an Intel Pro a high performance option is available for install. FIGURE 2. Intel Pro Install Choices 6. Right click on the net driver desired for the camera. 7. Select the desired driver install Install High Performance IP Device Driver or Install Intel Network Driver.
ページ16に含まれる内容の要旨
Page 4 TM-4200GE Software 3. Click the Change or Remove button as shown in Figure 3 on page 4. FIGURE 3. Change and Remove Buttons 1.4.4 Quick-Start Use the following quick-start process when the Camera Interface Application is installed on your PC. 1. Connect the camera. The Hirose pin layout is shown in Table 1 on page 6. Both the Hirose and the network cable (RJ-45) are illustrated in Figure 6. Verify that both LED’s on the RJ-45 connector are green. 2. Run the Camera Interface Application.
ページ17に含まれる内容の要旨
Page 5 TM-4200GE Software FIGURE 5. Select Camera Window 5. Go to the Acquisition tab and click Start. An image stream should appear. 6. Click on the Configure button at the bottom of the Coyote screen, and open the GigE Camera Soft- ware dialog box. This is your integrated control software. Note: The color version (TMC-4200GE) requires that color interpolation be performed in the frame grabber or by using the host computer’s CPU. In default mode, the camera supports 2 x 2 color interpolatio
ページ18に含まれる内容の要旨
Page 6 TM-4200GE Software 2 Connectors The camera has two sockets, as shown in Figure 6 below: • 12-pin Hirose for power, trigger, RS-232 communication and TTL I/O. • RJ-45 for Gigabit Ethernet. FIGURE 6. TM-4200GE Back Panel Connectors GigE POWER These connectors are described in Section 2.1 and Section 2.2. 2.1 Power and Signals Connector The GE camera receives power and signal through a 12-pin Hirose connector. Table 1 lists the pin layout and describes the function of each pin. The table
ページ19に含まれる内容の要旨
Page 7 TM-4200GE Software FIGURE 7. HR10A-10R-12P 9 1 2 8 10 11 3 12 7 4 6 5 2.2 Ethernet The GigE socket, marked on the camera’s back panel as GigE, is a standard RJ-45 Ethernet socket. Use at least cat5e UTP cables (Cat6 cables are preferred). If you wish to connect the camera directly to a PC, 1 you must use a cross-over cable. Refer to the Cam2Net User's Manual for details. FIGURE 8. Ethernet GigE Socket GigE 1. JAI recommends the use of shielded cables to reduce emissions and for CE/FCC
ページ20に含まれる内容の要旨
Page 8 TM-4200GE Software 3 Configuring the TM-4200GE Camera The configuration of the GigE camera consists of two parts: • The imager configuration (CCD and control circuits) • The internal frame grabber configuration The imager can be configured for partial scan, binning, and so on, just like a Camera Link camera. The internal frame grabber is automatically configured for the pixel type, windowing, image size, I/O and so on, by the GigE camera software. 3.1 Setup If you have a peer-to-pee
