ページ1に含まれる内容の要旨
H1 IMPRINT MODE
Available imprint modes of the H1
Type 1
Type 2
Prints all available
Prints basic exposure
exposure info.
info only.
Type 4
Type 3
Prints date and time Prints the text you entered
together with date and time
info only.
Type 5 Type 6
Prints the text you entered together with Prints the text you entered
basic exposure information
Type 1, Enhanced exposure information:
Aperture Light metering Auto focus Frame number Lens focal length
mode mode incl. converter
Shutter speed Exposu
ページ2に含まれる内容の要旨
H1 IMPRINT MODE Type 2, Basic exposure information: Aperture Lens focal length incl. converter Shutter speed Notes: 1 If an exposure adjustment is set on the camera, a value will appear between shutter speed and focal length Type 3, Date & Time: Date (YY MM DD) Time (HH:MM:SS) Notes: 1 Seconds are only shown in 24 hour time format Type 4, Text & Date: Custom text Date (YY MM DD) Notes: 1 If the text is longer than 33 characters, the date will be excluded www.hasselblad.com Document ID: H1 impri
ページ3に含まれる内容の要旨
H1 IMPRINT MODE Type 5, Text & Info: Custom text Shutter speed Lens focal length incl. converter Aperture Notes: 1 If an exposure adjustment is set on the camera a value will appear between shutter speed and focal length 2 If the text is longer than 25 (19 with exposure adjustment) characters, part of the exposure info will be excluded Type 6, Text: Custom text. Max 37 characters www.hasselblad.com Document ID: H1 imprint modes.indd - 2005-05-10
ページ4に含まれる内容の要旨
H1 IMPRINT MODE Imprint mode setting To make a selection of type of data for imprinting, proceed as follows: F L A S H A F D R I V E From the normal screen Scroll to the menu item press the “MENU” button. “Settings” with the front wheel and press “Enter” F L A S H A F D R I V E F L A S H A F D R I V E Scroll to the menu item Scroll to the menu item “Imprint” with the front wheel and press “Imprint type” with the front wheel and press “Enter” “Enter” F L A S H A F D R I V E Select one of the
ページ5に含まれる内容の要旨
H1 IMPRINT MODE Imprint text mode setting To enter custom text for imprinting, proceed as follows: From the normal Use the front wheel to Use the front wheel Use the front wheel screen press the select the menu to select the menu to select the menu “MENU” button. “Settings”, then press “Imprint”, then press item “Text”, then the “Drive” button. the “Drive” (Enter) press the “Drive” (marked with “Enter” button. (Enter) button. on the LCD) The main text screen will now appear which, by moving
ページ6に含まれる内容の要旨
H1 IMPRINT MODE Imprint text setting F L A S H A F D R I V E F L A S H A F D R I V E Use the front wheel to move Press the button over the “Sel.” The text string is erased. the cursor caption (AF button) to erase the to the left until it is over the character to the “X” character. left of the cursor in the lower row. This will activate the “delete- Keep pressing the “Sel.” button key” until the whole text is erased. F L A S H A F D R I V E F L A S H A F D R I V E F L A S H A F D R I V E Use t
ページ7に含まれる内容の要旨
H1 IMPRINT MODE Magazine settings The last setting is to check that the magazine is programmed to imprint data. This is the default setting of the magazine. Check that the caption “DATA” is shown on the magazine LCD. If this is not the case, slide the lock switch (4) on the right side of the magazine forward to unlock the magazine buttons. Press the mode button (1) repeatedly until the cap- tion “DATA” is shown together with “oFF”. Use either of the change but- tons (2, 3) to change the ind
