ページ1に含まれる内容の要旨
Epson P-2000
P-2000 Parts
®
Audio/Video
CompactFlash card slot
out connector
SD card slot
Eject button
Headphone
connector
Power switch
AC adapter connector
USB
connector
Speaker
USB
connector
cover
Battery cover
Reset button
LCD
Print button
Displays the Print menu.
Charge light
Access light
Turns green when the Menu button
Flashes orange
battery is being charged. Displays the Pop-up menu.
when you turn on the
P-2000 or access data.
4-way ring
Activity light
Press up, down, left, or righ
ページ2に含まれる内容の要旨
Epson P-2000 Interface Specifications USB connector One USB 2.0 (Mass Storage Class) interface General A/V Out CPU TMS320DM270 connector Mini pin jack (3.5 mm) LCD 3.8 inches, Epson VGA TFT LCD; Headphone Out 640 × 480 pixels; 262,144 colors; 212 ppi connector M3 stereo mini pin jack (3.5 mm) CF Card slot One slot (Type I/Type II, 3.3V) for Memory 64MB SDRAM; 4MB flash ROM CompactFlash memory card and HDD 2.5 inch HDD, 40GB, FAT 32 Microdrive Dimensions Height 3.3 inches (84 mm) SD Card
ページ3に含まれる内容の要旨
Epson P-2000 4. Push the catch down. The battery pops out. Installing/Replacing the Battery Follow these steps to install or replace the Lithium ion battery: 1. Turn the P-2000 upside down and slide the battery cover to the left to open it. Catch 5. Pull out the battery. Then close the battery cover. 2. If you need to remove the battery, follow the instructions below, then return here to step 3. 3. Insert the battery into the compartment as shown. Make sure the gold contacts on the battery go
ページ4に含まれる内容の要旨
Epson P-2000 Conserving Battery Power Using the Home Screen To conserve battery power and protect the LCD screen, the P-2000 has two power-saving features. If no button has been Whenever you turn on the P-2000, the Home screen appears. pressed and there has been no activity for 10 minutes, the All operations can be started from this screen. backlight on the LCD screen is turned off. After 15 minutes, Battery icon the power is turned off. If the screen goes dark because the backlight is tu
ページ5に含まれる内容の要旨
Epson P-2000 To remove a card from the C/F Card slot, first make sure the Using Memory Cards Access light is off. Then press the eject button and pull out the card. The P-2000 has two memory card slots, one for If the button is not sticking out, press it once to pop it out, CompactFlash cards, and one for Secure Digital cards. then press it again to eject the card. It supports the following types of memory cards: ❏ CompactFlash Type I and Type II ™ ❏ Microdrive (3.3 V) ❏ SD (Secure Digit
ページ6に含まれる内容の要旨
Epson P-2000 Copying your files Copying Files from a Memory Card 1. Insert the memory card. After you insert a memory card, you can browse the files and decide what you want to do with them, or simply copy all the 2. Select Memory Card in the Home screen and press the OK files on the card to the P-2000. button. 3. If necessary, select the memory card you want to access. You Note: When the battery is low, copying may not be completed. see the following menu: Use the AC adapter if this happen
ページ7に含まれる内容の要旨
Epson P-2000 Screen icon descriptions Viewing and Playing Images, Audio, PC_DATA folder This is one of the default albums, which and Video you use for copying files from your computer. After you have copied files from a memory card, you can view Battery status Indicates the amount of battery power or play them in various ways on your P-2000 or on a TV or remaining. projector. Folders containing Only folders that do not include image or audio video files display this icon. Screen Icons Alb
ページ8に含まれる内容の要旨
Epson P-2000 3. Use the 4-way ring to select the image you want to view, Displaying Images then press the OK button. The selected image is enlarged to You can display all images in Saved Data or Albums as fill the screen: thumbnails. You can also display an image in full-screen format. 1. Select Saved Data or Albums in the Home screen and press the OK button. Home Saved Data Albums Memory Card Zooming an image Latest Data Settings ❏ To zoom in on an image displayed full screen, press the OK
ページ9に含まれる内容の要旨
Epson P-2000 Supported audio formats Viewing Files on a TV File Audio codec Detail extension You can connect the P-2000 to a TV or AV projector and view your images, videos, and slide shows. .m4a AAC (MPEG4) Maximum bit rate: 320 kbps .aac (48 kHz, 16 bit Stereo) You’ll need a camcorder-to-TV/VCR audio/video cable .mp3 MP3 Maximum bit rate: 320 kbps (A/V cable with 3.5 mm mini-plug to 3 RCA phono plugs). (48 kHz, 16 bit Stereo) You can purchase the cable at an electronics store. 1. Connect
ページ10に含まれる内容の要旨
Epson P-2000 3. Select the EPSON_PV drive on your computer. In Copying Files to and From Your Windows, you may have to use My Computer to select the Computer drive. From your computer, you’ll see an Albums folder and a You can connect the P-2000 to your computer using the Cards folder (corresponding to Saved Data on the Home USB cable that came in the box. Your computer recognizes the screen). Do not change the names of these folders or any of P-2000 as an external hard disk drive, and y
ページ11に含まれる内容の要旨
Epson P-2000 4. Connect the other end of the cable to the EXT I/F connector Direct Printing on the printer. You can print your photos directly from the P-2000 to any of the following Epson printers without connecting a computer: ❏ Epson Stylus Photo R300 and R300M ❏ Epson Stylus Photo R320 ❏ Epson Stylus Photo RX600 ❏ PictureMate Note: Additional printers may be supported; check the Epson web The EXT I/F connector may be in a different location on site to get the latest information: http
ページ12に含まれる内容の要旨
Epson P-2000 4. Do one of the following: Updating the Firmware and Printer ❏ To print only the selected image, choose Print This Driver Photo. Epson will occasionally update the P-2000 firmware. You can ❏ To print all the images in the selected folder or album, download the latest version from Epson’s Support web site: select Print All Photos. http://support.epson.com. Instructions for updating the ❏ To add images to be printed and select the number of firmware in your P-2000 will be inc
