ページ1に含まれる内容の要旨
Internet Camera IC-1000
User Manual
Version: 1.23
Released Date: Jan., 2005
ページ2に含まれる内容の要旨
Contents 1. Introduction.......................................................................................................... 3 2. Package Content................................................................................................. 3 3. System Requirement........................................................................................... 3 4. Hardware Installation........................................................................................... 4 4.1. LED an
ページ3に含まれる内容の要旨
1. Introduction Thank you for choosing the Internet Camera. This Camera sends live video through the Internet to a web browser or camera viewer anywhere in the world! This compact, self-contained unit lets you keep an eye on your home, your kids, and your workplace—whatever’s important to you. How does the Camera do all of this? Unlike standard “web cams” that require an attached PC, the Internet Camera can connect directly to a network. The Motion JPEG video compression produces a high
ページ4に含まれる内容の要旨
4. Hardware Installation 4.1. LED and Focusing The Camera head and its focus ring allow you to modify the aim and focus of the Camera. To adjust the Camera’s focus, rotate the dark focus ring. There are two LEDs indicating the camera status. Monitoring: When someone is viewing the camera, the LED will light. Ready: When the camera is power on and ready for access, the LED will light. LED Green: Monitoring LED Focus ring Amber: Ready 4.2. Camera Ports The Camera feat
ページ5に含まれる内容の要旨
LAN Port Power Jack 4.3. Installation Procedure 1. Unpack the Internet Camera package and verify that all the items listed in the Chapter 2 are provided. 2. Connect the Internet Camera to your network by attached the network cable from the switch/router to the UTP port of the Internet Camera. 3. Connect the power adapter to the Internet Camera and plug the power adapter to power outlet. The Internet Camera will be powered on. When the Internet Camera is ready, the Rea
ページ6に含まれる内容の要旨
2. The Install Wizard will show four selections, select the program you want to install or click “Exit” to install the program later. The following installation steps are the demonstration of “Install Administrator Utility & Camera Viewer”. 3. The system will start the installation procedures. Click “Next” to continue installation. 6
ページ7に含まれる内容の要旨
4. If you wish to install the software program in an alternate location, click “Change”; otherwise click “Next” to move on to the next step. 5. Click “Install” to start installing the program. 7
ページ8に含まれる内容の要旨
6. The system will install the program automatically. 7. Click “Finish” to complete the software installation. 8
ページ9に含まれる内容の要旨
8. When the installation is completed. The system will auto run ”Administrator Utility“. On the Internet Camera first page, the cameras found in the network are listed in the left window. Choose the one you want to configure and click “Setting Wizard” to proceed. “N” means the camera is new and not configured. 9. Please enter the default password “1234” and click “OK” to login to the IP setup page. 9
ページ10に含まれる内容の要旨
10. Internet Camera is working through the network (TCP/IP Protocol). The IP address setting must be correct, or you cannot access to the camera. The wizard program will detect the IP address status of your network automatically and suggest a free IP address for the Camera. You can accept the suggested value or enter the value manually. If you enter the value manually, please be aware that the “Subnet Mask” must be the same for both the camera and the PC. Click “Finish” to apply the configu
ページ11に含まれる内容の要旨
12. The “Camera Viewer” will show the video automatically. Congratulations, you can use the camera through the network to view the video from now on. 6. Using the Administrator Utility The Administrator Utility allows users to search and setup the cameras located within the Intranet or on the Internet. From the utility, users can view all the information of the selected camera; furthermore, it provides a setting wizard, which can guide users to add the camera to the network easily an
ページ12に含まれる内容の要旨
Once the utility is started, it will search all the cameras within the network. To do more settings, please refer to the description in the following sections. 12
ページ13に含まれる内容の要旨
6.1. General Setting LAN Click the button will search the camera within the network Auto Discover automatically. The list shows the camera name and the setup status of the Camera List camera. It means the camera is in the default setting. It means the camera is configured before. Internet Add Click “Add” will appear a window for you to enter the IP Address of the camera on the Internet. Delete Click “Delete” to delete the camera from the list. Internet 13
ページ14に含まれる内容の要旨
Camera List The list shows the camera name and the connect status of the camera. It means the camera is disconnected or not in the Internet. It means the camera is connected. Information of Camera Camera Information It displays all information of the selected camera. The information includes firmware version, network information, IP Address, UPnP setting, DDNS setting, Resolution and E-mail setting, etc. Camera Setting Detail Setting Click “Detail Setting” to do more setting o
ページ15に含まれる内容の要旨
6.2. Detail Setting When you click the “Detail Setting”, a screen will pop up for you to enter the “Administrator Name” and “Password”. The default value is as follows. Name: “Admin” Password: “1234” If the name and password you enter are correct, you can start to setup the camera. 15
ページ16に含まれる内容の要旨
Network Setting Internet Camera Name The default camera name is “IPCamera_MJPEG”. It is recommended to name a meaningful name for the camera. IP Address Enter an unused IP Address within the IP address range used on your LAN. If the IP Address of your LAN is from the 192.168.2.1 to 192.168.2.254, you can set an unused IP Address from the range for the camera, for example: 192.168.2.250. Subnet Mask The Subnet Mask field must match the subnet setting on your LAN. For example: 25
ページ17に含まれる内容の要旨
Network Setting Video Port The Video Port is used to transmit or receive the video streaming in the network. The default port setting is “4321”. If you want to view the video from the camera, the port setting should be correct. Web Port This camera support web connection, the default web port is 80. Since the web server may use port 80, you can use a different port for the camera. If you change the web port from 80 to 8080, you must type http://192.168.2.3:8080 to connect the camera
ページ18に含まれる内容の要旨
Resolution Resolution Select the desired video resolution format. Larger resolution requires more bandwidth. 640 x 480 is “VGA” format. 320 x 240 is “CIF” format. 18
ページ19に含まれる内容の要旨
Advanced Setting UPnP When the UPnP function is enabled, the camera can be detected by UPnP compliant system such as Windows XP. The camera will be displayed in the Neighborhood of Windows XP, so you can directly click the camera to view the video through web browser. DDNS Many internet connections use a "Dynamic IP address", where the Internet IP address is allocated dynamically whenever the Internet connection is established. Internet users should know the IP Address of the camera wh
ページ20に含まれる内容の要旨
Password Current Password Enter the current password of the camera. New Password Enter the new password you want to use for the camera. Confirm New Password Retype the new password to confirm the setting. 20
