ページ1に含まれる内容の要旨
BTX-208
Fume Extraction System
System User Guide
page
For Your Safety............................................................................ 2
Items Supplied ............................................................................. 2
Description................................................................................... 2
Installation....................................................................
ページ2に含まれる内容の要旨
For Your Safety For safe and successful operation of the unit, read these instructions completely. If the instructions are not observed, the manufacturer can assume no responsibility. Retain this manual for future reference. Always disconnect the power supply before servicing the unit. Do not operate the Unit without filter inserts. Contaminants in the extracted air will damage the blower. Use only original equipment filters. The BVX-208 is designed for the removal of solder fumes.
ページ3に含まれる内容の要旨
Replacement of filters: If, after cleaning of accessories, the fumes are not extracted efficiently, replace filter(s) inside filter unit. Initially replace the pre-filter only. If this step does not sufficiently improve the airflow, then replace the main filter (HEPA/Carbon). 1. Turn unit off. 2. Disconnect the power cord. 3. Unlatch the filter cover (1). 4. Remove filter cover. 1 5. Replace the filters. (Pre-filter/main filter). Make sure to place main filter inside the alignment pins
ページ4に含まれる内容の要旨
Part Numbers BTX-208 Filter Unit tip extraction for 8 stations, 100-240V / 50-60Hz Replacement Filters FP-BVX200 Pre-filter (Pack of 5) FM-BVX200 Main filter, HEPA 99.95% / Carbon Duct Connection Kits BTX-CK2-25 Hose connection kit 2-4 stations 2.5m (8’) long BTX-CK4-50 Hose connection kit 4-8 stations 5m (16’) long BTX-CK4-75 Hose connection kit 2-4 stations 7.5m (25) long For Iron Adapter Kits contact your OK International Sales Representative. Warranty
