ページ1に含まれる内容の要旨
e-STUDIO202S
Online Manual
Start
ページ2に含まれる内容の要旨
Contents How to Use the Online Manual Troubleshooting 1 4 How to Use the Online Manual 1 Identifying Unit Problems 22 Check the Connection between the Unit and Computer 23 Check Your Computer 24 Plug and Play Screen does not Appear 25 2 Print Failed to Install the Driver (Windows 2000/XP) 26 Printing Overview 2 Faint, Uneven or Smeared Print Output 27 Basic Printing 3 Characters or Graphics are not Printed in Correct Position 28 Starting the Printer Driver Using the "Start" Button 4 Nothing Prin
ページ3に含まれる内容の要旨
How to Use the Online Manual 1 This Online Manual provides instruction for the operation of your new unit. Please read the following explanation of how to use the Online Manual, and then search for the information that you need. For more information about computers, operating systems and Acrobat Reader, please refer to the relevant manual or help file. How to Control the Online Manual Takes you back page by page. To return to the previous link, Click this button to display the Table of click
ページ4に含まれる内容の要旨
Printing Overview 2 The flow chart shown below provides printing overview. Reference: For more information on printing, see Basic Printing. When the paper source is the paper tray or multi-bypass tray, verify that the paper has been loaded before starting printing. Ensure printing has been completed before turning the power off. Do not remove the power cord before turning Caution the unit off. Prepare the document you intend to print Open the printer driver setup screen and set the print pre
ページ5に含まれる内容の要旨
Basic Printing 2 This is a printing example using WordPad to print a document onto Letter size paper. Start WordPad, make a new file, and enter the text Click the "Print" button in the "Print" dialog box. 1 4 you intend to print. On Windows 98/Me, click the "OK" button. Select "Print" from the application's "File" menu. 2 TOSHIBA e-STUDIOXXX X Make sure that "TOSHIBA e-STUDIOXXXX" is 3 selected as the current printer. If you intend to change any print setting, click the "Preferences" button
ページ6に含まれる内容の要旨
Starting the Printer Driver Using the "Start" Button 2 You can open the printer driver and change the printer driver settings from the Windows "start" button. Settings adjusted in this way will be the initial settings when you print from an application. (If you change the settings from the printer driver setup screen at the time of printing, the settings will revert to the initial settings when you quit the application.) Reference: Basic Printing Windows 2000/XP/Vista Windows 98/Me Click the "
ページ7に含まれる内容の要旨
Printer Driver Settings 2 To view Help for a setting, click the ( ) button in the upper right-hand corner of the window and then click the setting. Tab Index which allows you to ( ) button switch between the various Click this button and then click a setup screens. setting to view Help for the setting. Check box You can also view Help by right-clicking the setting Click this option to activate/ Note with the mouse. deactivate each function. The settings you made at "N-Up Printing", "
ページ8に含まれる内容の要旨
Printing a Watermark 2 To print a watermark, for example "CONFIDENTIAL", on your document, refer to the following steps. Open the printer driver and click the "Watermarks" tab. Reference: See Basic Printing for details on how to open the printer driver. How to Print a Watermark From the "Watermark" drop-down list, select the watermark, for example "CONFIDENTIAL", you wish to print on your document, and start printing. Print sample For details on watermark settings, view printer driver Help. Re
ページ9に含まれる内容の要旨
Fitting the Printed Image to the Paper 2 This printer driver can adjust the zoom ratio for printing according to the paper loaded in the unit. Follow the steps shown below to use this function. The instruction below assumes that you intend to print a Letter or A4 size document onto an Invoice or B5. The "Fit To Paper Size" setting is not available when "N-Up Printing" is selected. Reference: Printing Multiple Pages on One Page Note Click the "Paper" tab in the printer driver setup Select the pa
ページ10に含まれる内容の要旨
Printing Multiple Pages on One Page 2 This feature allows you to print two or four document pages onto a single page. To use this function, open the printer driver setup screen, select "2-Up" or "4-Up" for "N-Up Printing" on the "Main" tab. The "N-Up Printing" setting is not available when "Fit To Paper Size" is selected. Reference: Fitting the Printed Image to the Paper Note N-Up Border Border "2-Up" "4-Up" If you select the "Border" checkbox, border lines will be printed on each page. CONTENTS
ページ11に含まれる内容の要旨
Outline of the Print Status Window 2 When printing begins, the Print Status Window activates and appears on the screen. The Print Status Window is a program designed to show the current printer status including the document name being printed and error messages. Status icon Status window This icon informs you of the print status. Provides details on the current status of the print job. Document Name Displays the name of the active print job. Tab Index which allows you to switch "Cancel Job" b
ページ12に含まれる内容の要旨
Scanning Overview 3 The flow chart shown below provides scanning overview. 1 When scanning from TWAIN* -compliant When scanning from "Scanner and 3 Using the unit to begin scanning* 2 or WIA* -compliant application Camera Wizard" (Windows XP) Place the original in the scanning position Reference: For more detail, refer to the "ORIGINAL PLACEMENT" in the Operation Manual. Start up a Twain-compliant or WIA- Start up the "Scanner and Camera Change the unit to scanner mode compliant application, a
ページ13に含まれる内容の要旨
Scanning an Image from a TWAIN-Compliant Application (part 1) 3 The TOSHIBA scanner driver conforms to TWAIN, the industry standard, making it compatible with a variety of TWAIN- compliant applications. Below is a step-by-step guide for acquiring a scanned image to the Desktop Document Manager desktop screen using Desktop Document Manager. Place the original (s) you wish to scan on the Select "TOSHIBA e-STUDIO TWAIN S", and click the 1 3 document glass/ADF. "Select" button. Reference: For info
ページ14に含まれる内容の要旨
Scanning an Image from a TWAIN-Compliant Application (part 2) 3 Select "Acquire Image" from the "File" menu, or Specify the scanning area, and set the scan 4 7 click the "Acquire" button ( ). preferences. The scanner driver setup screen will appear. For information on specifying the scan area and setting the scan preferences, see scanner driver Help. Reference: Scanner Driver Settings Reference: Scanner Driver Settings In the "Scanning Position" menu, select the Setting a large area with full
ページ15に含まれる内容の要旨
Scanning an Image from a TWAIN-Compliant Application (part 3) 3 Scanner Driver Settings The scanner driver setup screen consists of the "Set-up screen", which lets you select scan settings, and the "Preview screen", which shows the scanned image. For details on the scan settings, click the "Help" button to display Help. Set-up screen "Scanning Position" menu "Scanning Mode" menu Select the desired scanning position from Switch the scanning mode between the "Platen" (document glass) or "ADF". "
ページ16に含まれる内容の要旨
Scanning an Image from a TWAIN-Compliant Application (part 4) 3 Preview screen Preview window Click the "Preview" button in the Set-up screen to display the scanned image. You can specify the scanning area by dragging the mouse inside the window. "Auto Scan Area Adjustment" button "Rotate" button Click when the preview screen is displayed to Each time this button is clicked, the preview automatically set the scanning area. image rotates 90 degrees. This lets you change the orientation of t
ページ17に含まれる内容の要旨
Scanning an Image from a WIA-Compliant Application (Windows XP/Vista) (part 1) 3 If you are using Windows XP/Vista, you can use the WIA driver to scan from Desktop Document Manager, Paint and other WIA-compliant applications. The procedure for scanning using Paint is explained in the following. If you have WIA drivers for other devices installed Place the original you wish to scan on the in your computer, the "Select Device" screen will 1 document glass/ADF. open. Select "TOSHIBA e-STUDIOXXX
ページ18に含まれる内容の要旨
Scanning an Image from a WIA-Compliant Application (Windows XP/Vista) (part 2) 3 Select the paper source and picture type, and click Click the "Scan" button. 3 4 the "Preview" button. Scanning begins and the image is acquired into Paint. The preview image will appear. Use "Save" in your application to select a file name and If you placed the original on the document glass, select folder for the scanned image, and save the image. "Flatbed" for the "Paper source". To cancel your scanning job aft
ページ19に含まれる内容の要旨
Scanning an Image from the "Scanner and Camera Wizard" (Windows XP) (part 1) 3 The procedure for scanning with the "Scanner and Camera Wizard" in Windows XP is explained here. The "Scanner and Camera Wizard" lets you scan an image without using a WIA-compliant application. Place the original you wish to scan on the Click the "Next" button. 1 4 document glass/ADF. Reference: For information on setting an original for scanning, refer to "ORIGINAL PLACEMENT" in the Operation Manual. Click the "sta
ページ20に含まれる内容の要旨
Scanning an Image from the "Scanner and Camera Wizard" (Windows XP) (part 2) 3 Select the "Picture type" and "Paper source", and Specify a group name, format and folder for saving 5 6 click the "Next" button. the image, and then click the "Next" button. If you placed the original on the document glass, select JPG, BMP, TIF or PNG can be selected for the format. "Flatbed" for the "Paper source". To begin scanning, click the "Next" button. If you placed the original in the ADF, select "Document
