ページ1に含まれる内容の要旨
Cov-Basic.fm Page 1 Tuesday, January 10, 2006 12:31 PM
ENGLISH
Preparations
Shooting
Playback/Erasing
Menus and Settings
Printing
Downloading Images
to a Computer
Basic
Camera User Guide
Please Read This First
This guide explains how to prepare the camera and use its basic features.
XXX-XXXX-XXX XXXXXXX © 2006 CANON INC. PRINTED IN XXXX
ページ2に含まれる内容の要旨
Flowchart and Reference Guides The following guides are available. Refer to them as necessary according to the flowchart below. For information on included System Map items and items sold separately Preparations • Charging the battery • Installing the battery and memory card • Setting the date, time and language Basic Camera User Guide (This Guide) • Read this first. Shooting Playback/Erasing Menus and Settings Handling precautions, Advanced Camera references to the various User Guide s
ページ3に含まれる内容の要旨
Preparations Preparations 1. Charging the Battery. Charge the battery before use under the following circumstances. • When using the battery for the first time. • When the "Change the battery pack" message displays. 1. Insert the battery into the battery charger. 2. Plug the battery charger (CB-2LX) into a power outlet, or attach the power cord to the battery charger (CB-2LXE) and plug it into a power outlet. • Battery charger model names and types vary by region. The charge indicator will lig
ページ4に含まれる内容の要旨
2. Installing the Battery. 1. Slide the memory card slot/battery cover and open it ( , ). 2. Push the battery lock in the direction of the arrow ( ) and insert the battery until it locks. To remove the battery, push the battery lock in the direction of the arrow ( ) and hold it while pulling the battery out. Battery Lock 3. Inserting the Memory Card. 1. Insert the memory card until it clicks into place. 2. Close the memory card slot/battery cover ( , ). Back Ensure that the memory card is co
ページ5に含まれる内容の要旨
Preparations To Remove the Memory Card Use a finger to push the memory card in until you hear a click, then release it. You can use SD* memory cards and MultiMediaCards with this camera. These cards are collectively called memory cards in this guide. *SD stands for Secure Digital, a copyright protection system. 3
ページ6に含まれる内容の要旨
First Time Settings Setting the Date/Time 1. Press the power button ( ). 2. Use the or button to select an item and the or button to change its value ( ). To set the daylight saving option, use the or button to display . 3. Confirm that the correct time is displayed and press the FUNC./SET button ( ). The date and time can also be set in the Set up menu (p. 13). • A rechargeable lithium battery is built into the camera to save such settings as the date/time. This battery charges when
ページ7に含まれる内容の要旨
Shooting Shooting Power button 1. Press the power button. The start-up sound will play and the start-up image will display in the LCD monitor. • Pressing the power button again turns the power off. • To switch to the setting that mutes all sounds (except for the warning sound), press and hold the DISP. button while pressing the power button. See the Advanced Guide: Using the LCD Monitor (p. 15) See the Advanced Guide: Power Saving Function (p. 22) See the Advanced Guide: Set up Menu (p.
ページ8に含まれる内容の要旨
2. Press the shutter button fully to shoot. The shutter sound will play and the image will record. The indicator will blink green while the image is recorded to the memory card. See Basic Shooting Functions (p. 6). See the Advanced Guide: Indicators (p. 22). See the Advanced Guide: How to Use the IS Mode (p. 35). See the Advanced Guide for the various shooting methods available. Reviewing an Image Right After Shooting After a shot is taken, the image appears in the LCD monitor
ページ9に含まれる内容の要旨
Shooting Shooting Modes The camera automatically selects settings. AUTO Manual Allows you to select settings yourself, such as the exposure compensation, white balance, my colors or ISO speed. Digital Macro Allows you to shoot when the distance from the lens (at maximum wide angle) to the subject is within 2 – 60 cm (0.79 in. – 2.0 ft.). The subject can be shown larger than in standard macro mode because the camera trims the image MANUAL edges and zooms in with the digital zoom. See the
ページ10に含まれる内容の要旨
Beach Fireworks Shoots without making people Captures appear dark near fireworks in the water or sand sky sharply and where reflected at optimal sunlight is strong. exposure. Underwater Appropriate for shooting images with Waterproof Case WP-DC5 (sold separately). This mode uses an optimal SPECIAL white balance setting to reduce bluish tones and record images with a natural hue. SCENE Color Color Swap Accent Use this option Use this option to to transform a have only the colo
ページ11に含まれる内容の要旨
Shooting Using the Zoom 1. Press the zoom lever toward or . The zoom can be adjusted from 35 – 140 mm (focal length) in 35mm film equivalent terms. Wide Angle: Zooms out from the subject. Telephoto: Zooms in on the subject. Using the Flash 1. Press the button to cycle through flash settings. Flash settings cannot be used in some shooting modes. Auto Auto Red-eye Reduction Red-eye reduction This feature reduces the effect of Red-eye Reduction On light reflecting back from the eyes and
ページ12に含まれる内容の要旨
Shooting Close-Ups/Infinity Shots 1. Press the / button to switch modes. To cancel the macro/infinity mode: press the / button to remove or from the display. These settings cannot be set in some shooting modes. Macro Use this mode to shoot close-ups of flowers or small items. Image Area at Minimum Shooting Distance from End of Lens to Subject • Maximum wide angle setting: 30 × 22 mm (1.2 × 0.87 in.) Minimum shooting distance: 2 cm (0.79 in.) • Maximum telephoto setting: 110 × 82 mm (4.3 ×
ページ13に含まれる内容の要旨
Playback/Erasing Playback 1. Turn the mode dial to (playback) ( ). The last recorded image will appear in the LCD monitor. 2. Use the or button to display the image you wish to view ( ). Use the button to move to the previous image and the button to move the next image. Holding the button down advances the images more rapidly, but shows them less clearly. See the Advanced Guide for the various playback methods available Erasing 1. In the playback mode, use the or button to selec
ページ14に含まれる内容の要旨
Menus and Settings Settings for the shooting or playback modes or such camera settings as the print settings, date/time and sounds are set using the FUNC. menu or the Rec., Play, Print, Set up or My Camera menu. FUNC. Menu This menu sets many of the common shooting functions. Turn the mode dial to , , or . Press the FUNC./SET button. Use the or button to select a menu item. • Some items may not be selectable in some shooting modes. Use the or button to select an option for the menu item.
ページ15に含まれる内容の要旨
Menus and Settings Rec., Play, Print, Set up and My Camera Menus Convenient settings for shooting, playback or printing can be set with these menus. (Set up) Menu (Rec.) Menu (My Camera) Menu You can switch between menus with the or button when this part is selected. • This example shows the Rec. menu. • In playback mode, the Play, Print, Set up and My Camera menus display. Press the MENU button. Use the or button to switch between menus. • You can also use the zoom lever to switch
ページ16に含まれる内容の要旨
Printing You can easily print by connecting the camera to a direct print compatible *1 printer with a cable and simply pressing the button on the camera. 1. Connect the camera to a Direct Print compatible printer and turn on the printer's power. Canon Brand Printers SELPHY CP Series 2 Compact Photo Printers* Interface Cable Camera PIXMA Series/SELPHY DS Series Bubble Jet Printers *1 Since this camera uses a standard protocol (PictBridge), you can use it with other PictBridge-compliant prin
ページ17に含まれる内容の要旨
Printing 2. Set the camera to the playback mode, turn on the power and confirm that , or is displayed in the upper left of the LCD monitor ( ). • The button will light blue. • The displayed icon will vary according to the printer model. 3. Use the or button to select an image to print ( ) and press the button ( ). The button will blink blue and printing will start. See the Advanced Guide: Setting the DPOF Print Settings (p. 89). See the Direct Print User Guide See the user guide f
ページ18に含まれる内容の要旨
Downloading Images to a Computer The following methods can be used to download images recorded by the camera to a computer. Some methods, depending on the OS used, may not be available. Please read System Requirements (p. 17) in advance. Camera to Computer Connection Supplied Software Install It Do Not Install It Computer Camera Computer Downloading Method Procedure Procedure Procedure OS Windows 98 – Second Edition (SE) Windows 2000 – Windows Me – Windows XP Mac OS X Computer System •Bas
ページ19に含まれる内容の要旨
Downloading Images to a Computer System Requirements Please install the software on a computer meeting the following minimum requirements. Windows OS Windows 98 Second Edition (SE) Windows Me Windows 2000 Service Pack 4 Windows XP (including Service Pack 1 and Service Pack 2) Computer Model The above OS should be pre-installed on computers with built-in USB ports. CPU Pentium 500 MHz or higher processor Windows 98 SE/Windows Me 128 MB or more RAM Windows 2000/Windows XP 256 MB or more USB Int
ページ20に含まれる内容の要旨
Preparing to Download Images Ensure that you install the software first before connecting the camera to the computer. Items to Prepare • Camera and computer • Canon Digital Camera Solution Disk supplied with the camera • Interface cable supplied with the camera 1. Install the software. 1. Place the Canon Digital Camera Solution Disk in the computer's CD-ROM drive. Double-click the [Canon Digital Camera Installer] icon in the CD-ROM window. When the installer panel appears, click [Install
