ページ1に含まれる内容の要旨
AXIS 211W
Network Camera
User’s Manual
ページ2に含まれる内容の要旨
About this Document Conformity Certification of Specified Radio equipment. AXIS This manual is intended for administrators and users of the 211W TELEC certification number 006NYC0103. AXIS 211W Network Camera, and is applicable for firmware Australia - This electronic device meets the requirements of the release 4.40 and later. It includes instructions for using and Radio communications (Electromagnetic Compatibility) Standard managing the camera on your network. Previous experience AS/NZ
ページ3に含まれる内容の要旨
AXIS 211W - Table of contents Product Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Unit connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Using the Network Camera . .
ページ4に含まれる内容の要旨
AXIS 211W - Table of contents I/O Terminal Connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 General performance conside
ページ5に含まれる内容の要旨
AXIS 211W - Product Features Product Features AXIS 211W is a professional wireless network camera capable of simultaneous Motion JPEG and MPEG-4 streams in full VGA resolution at up to 30 frames per second. It uses a progressive scan sensor, which drastically reduces motion blur compared to traditional NTSC/PAL cameras providing interlaced video. When connected to a fixed network it can be powered using Power over Ethernet (PoE). AXIS 211W has advanced security and network management facilit
ページ6に含まれる内容の要旨
AXIS 211W - Product Features Overview Antenna Status indicator LED and Internal microphone Tele/wide puller Focus puller Rear panel Network Power I/O terminal connector connector connector Antenna connector DC-Iris control cable Underside Audio in Audio out Serial number Control button Power indicator LED Dimensions Network indicator LED HxWxD = 38 x 88 x180 mm (1.5" x 3.5" x 7") Wireless indicator LED Weight =260g (0.57 lb) (without antenna) 6
ページ7に含まれる内容の要旨
AXIS 211W - Unit connectors Unit connectors Antenna connector - Reverse SMA connector for antenna. Network connector - auto-MDIX, RJ-45 Ethernet connector. Using shielded cables is recommended. Power connector - Mini DC connector. 7 - 20V DC, max 5W. See product label for ± connection. Audio in - 3.5mm input for a mono microphone, or a line-in mono signal (left channel is used from a stereo signal). Audio out - Audio output (line level) that can be connected to a public address (PA) system or
ページ8に含まれる内容の要旨
AXIS 211W - Using the Network Camera Using the Network Camera This document includes instructions for using and managing the AXIS 211W. For instructions on how to install the AXIS 211W on your network refer to the Installation Guide which is supplied with the product in the printed format or in PDF format from the Axis Web site at http://www.axis.com The AXIS 211W can be used with most standard operating systems and browsers. The recommended browser is Microsoft Internet Explorer with Windo
ページ9に含まれる内容の要旨
AXIS 211W - Using the Network Camera Accessing the AXIS 211W from the Internet Once configured, your AXIS 211W is accessible on your local network (LAN). To access the camera from the Internet, network routers must be configured to allow incoming traffic, which is usually done on a specific port. To do this, enable the NAT-traversal feature, which will attempt to automatically configure the router to allow access to the camera. This is enabled from Setup > System Options > Network > TCP/IP A
ページ10に含まれる内容の要旨
AXIS 211W - Using the Network Camera The Live View Page Depending on whether or not the Live View page has been customized, the buttons described below may or may not be visible. w The Video Format drop-down list allows the video format on the Live View page to be temporarily changed. The Output buttons control the Pulse - click this button to activate the output for a defined output directly from the Live period of time, e.g. to switch on a light for 20 seconds. View page. These buttons
ページ11に含まれる内容の要旨
AXIS 211W - Using the Network Camera Use the sliders to control the volume on the speaker and microphone. The volume can be set between 0 and 100. When using Half-duplex mode, this button toggles between allowing you to speak and listen. The first icon indicates that you can talk and the speaker attached to the camera will play your voice. The second indicates that you will hear audio from the camera, but no audio will be sent to any web clients. When in Simplex talk mode, the icon tog
ページ12に含まれる内容の要旨
AXIS 211W - Video Stream Video Stream The AXIS 211W provides several different image and video stream formats. The type to use depends on your requirements and on the properties of your network. The Live View page in the AXIS 211W provides access to MPEG-4 and Motion JPEG video streams, as well as single JPEG images. Other applications and clients can also access these video streams/images directly, without going via the Live View page. How to stream MPEG-4 This video compression standard
ページ13に含まれる内容の要旨
AXIS 211W - Video Stream MPEG-4 clients AXIS Media Control (AMC) The recommended method of accessing live video (MPEG-4 and Motion JPEG) from the AXIS 211W is to use the AXIS Media Control (AMC) in Microsoft Internet Explorer in Windows. The AMC control panel can be used to configure various video and audio settings. Please see the readme file included in the tool for more information. The AMC control panel is automatically installed on first use, after which it can be configured. Open th
ページ14に含まれる内容の要旨
AXIS 211W - Configuration Configuration This section describes how to configure the camera, and is intended for product Administrators and Operators. For a description of user access rights, see Security, on page 27. The camera is configured from Setup, from a standard browser. The descriptions below show examples of the features available in the AXIS 211W. For details of each setting, please refer to the online help available from the Setup tools. Click to access the online help. Accessing t
ページ15に含まれる内容の要旨
AXIS 211W - Video and Image settings Video and Image settings The following descriptions show examples of some of the features available in the AXIS 211W. For details of each setting, please refer to the online help available from the setup tools. Click to access the online help Image Appearance Use these settings to change the image as required. The image can be rotated, the image resolution and compression can be adjusted, and the white balance can be changed. The configuration of the vi
ページ16に含まれる内容の要旨
AXIS 211W - Video and Image settings Overlay/Mask Settings Overlay/Mask Type The following options are available for overlays and masks: • Uploaded image as overlay • Configurable areas as privacy mask Uploaded image as overlay is a text and/or a static image superimposed over the video image, for extra information. To upload an overlay image to the camera: 1. Select the type of overlay to use in Overlay/Mask Type. 2. In the field Upload own image, click the Browse button and locate the image
ページ17に含まれる内容の要旨
AXIS 211W - Video and Image settings Max gain, measured in decibels (dB), describes the amount of amplification applied to the visual information in the image. A high level of amplification will provide viewable images in very low light, but will increase image noise. To prioritize image quality, choose Prioritize image quality from the drop-down box Exposure priority, and lower the Max gain. If this does not produce the desired results, increase the Max exposure time. To instead prioritize
ページ18に含まれる内容の要旨
AXIS 211W - Audio Settings Audio Settings The AXIS 211W can transmit audio to other clients using a connected external microphone or the internal microphone and can play audio received from other clients via connected speakers. This section describes how to configure the basic audio settings for the AXIS 211W, e.g. set the communication mode and adjust the sound levels in the microphone and speakers connected to the camera. Note: The speakers connected to the audio output must have a built-
ページ19に含まれる内容の要旨
AXIS 211W - Audio Settings Depending on the selected encoding, set the desired Bit rate (audio quality). The settings affects the available bandwidth and the audio quality, i.e. a high bit rate setting requires more bandwidth. The AXIS 211W can be set to trigger an event if the incoming sound level rises above, falls below or passes the set value. The Alarm level is set between 0-100%. Audio Output If the sound from the speaker is too low or high, adjust the output gain for the active speake
ページ20に含まれる内容の要旨
AXIS 211W - Live View Config Live View Config These are the tools for deciding the layout of the camera’s Live View page. The layout can be set in 3 ways: • Use Axis look - the layout is unchanged. • Use custom settings - modify the default Live View page with your own colors, images etc. Click the Configure button and see below. • Own Home Page - Use your own custom page as the default web page. Click the Configure button and see the following page. The other settings on this page concern
