ページ1に含まれる内容の要旨
IP Kamera 9060A –MP (Mega Pixels)
User Guide
IP Kamera 9060A-MP
Manual version: 1.00
Date: 2006.08
1
ページ2に含まれる内容の要旨
Caution: Any changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for FCC and CE. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in commercial environment. Important Notice: 1.IP Kamera 9060A-MP (Mega Pixels) is for indoor use. Note that the CMOS lens can
ページ3に含まれる内容の要旨
Table of Contents 1. PRODUCT OVERVIEW ...............................................................................................4 FEATURES ........................................................................................................................ 2. PHYSICAL DESCRIPTION..........................................................................................5 BOX CONTENT.......................................................................................................
ページ4に含まれる内容の要旨
1. Product Overview IP Kamera 9060A-MP (Mega Pixels) has a built-in a web server which can transfer video & audio via a data network and monitor your home /office / commercial facility form any corner of the world. Adopt latest technology, 9060A-MP (Mega Pixels) can take 1600 * 1200 pictures when enable Motion Detection or click SNAPSHOT, unlike other IP Camera, you can get extremely clear pictures. Further improvement, 9060A-MP (Mega Pixels) can capture video in WMV format. FEATURES 1
ページ5に含まれる内容の要旨
2. Physical Description BOX CONTENT IP Kamera package content 1 x IP Kamera 9060A-MP (Mega Pixels) 1X Ceiling mount 1 x RJ 45 internet line 1 xTansformer 5V 1.0A, support 110~240V . 1 x CD 1 x Quick Installation Guide System Requirement Intel Pentium and above or relevant AMD CPU Any system can use IE (Internet Explore) like Windows 2000 / XP, 64MB memory or above. VGA Card support Hi - Colors and above and direct draw Suggest Internet Hub Ethern
ページ6に含まれる内容の要旨
3. Interface Description Front Panel: 1. Power indicator (LED) 2. Sensor: 1/2 CMOS Rear Panel: 1. Reset ON / OFF ( Left - OFF & Right –ON ) 2. DC Power: 5V, 1.0A 3. Microphone In 4. RJ 45 (Cat5 Network) Notice * Please use Microphone fro Audio In * Reset ON/OFF: please turn to ON for 5-10 seconds and then turn back to OFF to Finish reset: OFF ON (Wait for 5 Second) OFF. 6
ページ7に含まれる内容の要旨
4. Installation Before installation: Before using IP Kamera 9060A-MP, check as follows. Confirm your package content A computer connects with LAN Hardware installation 1. Plug in RJ 45 line to connect 9060A-MP (Mega Pixels) with HUB 2. Connect the HUB into your modem. 3. Connect 9060A-MP (Mega Pixels) power. 4. Turn you computer on 9060A-MP HUB XDSL or * 9060A-MP HUB / ROUTER XDSL Turn on your computer and the power adapter of IP SENSOR 9216. Software installation
ページ8に含まれる内容の要旨
5. Initialization Set up on Ethernet Click “ipEdit.exe” . Please affirm the power of 9060A-MP (Mega Pixels) had been turn on and the Ethernet connection of RJ45 is correct. 8
ページ9に含まれる内容の要旨
A. LOCAL Devices area: IPEDIT will searching all IP Products 9XXXseries in the same local Ethernet, the default name of 9060A-MP (Mega Pixels) is Cam-location, and display the information as select 1. Double click the IP address, it will be covered by dark stripe, its name, and IP will be displayed below. The IP address of IP camera 9060 should in the same subnet with your PC, subnet mask, and default gateway mast same as 9060 also. For exampl
ページ10に含まれる内容の要旨
IP 9060A-MP (Mega Pixels) Default static dynamic IP Address is 192.168.0.100. the last digit of IP address (default is 100) can be any number between 1~254, but can not be same as your PC. If using in any PC, just use HUB and type the 192.168.0.100 in Browser or use “ipedit.exe “ then you can get in the web page. * Same SEGMENT: The first 3 number of IP address is same - XXX.XXX.XXX.abc. The part of XXX is same. Fro Example : IP address is 192.168.1.100 ,
ページ11に含まれる内容の要旨
B. Internet online devices: By setting the server address in IP server of advanced setting page, user can easily to get the IP address of IP Kamera 9060A-MP on internet by name searching. The default IP address of IP server is 220.135.169.136. Step1: click “connect” green button Step2: type the keyword in “ device name “ 11
ページ12に含まれる内容の要旨
Work with Yahoo /MSN Messenger 1. Work with Yahoo /MSN Messenger: We use Yahoo for instance. Select the friend you would like to send your video. For instance, we pick up Yahoo Helper. 2. Choose T1/E1 when system ask you about the Internet connecting speed. 3. Then My WEBCAM will pop up. Please go to “file “ “Preference” “Camera Setting” to select your prefer video parameter. 12
ページ13に含まれる内容の要旨
4. You can type in appointed IP address (No matter Real IP or Dynamic IP) and confirm by click “Add” and choose if reverse the out streaming video. We support: A. Normal B. Flip Vertical C. Flip Horizontal D. Rotate 180 And you can also adjust the color, Brightness, contrast, Hue, Saturation, Sharpness and ETC. Note 1 : for safety issue , as transfer video by Yahoo /MSN, only Administrator can do the video streaming. You have to type the username and password. 2 : Work
ページ14に含まれる内容の要旨
6. WEBPAGE FUNCTIONS When your computer configured IP address, you can finish setting through IE browser. Click the picture in the window of IPEdit directly; you can open the web page of IP9060. Login setting General user: Default general ID is guest, Password is password. Administrator: Default administrator ID is admin, Password is 12345678. If forget password, please switch “ Reset ON/OFF “, Please turn to ON for 5-10 seconds and then turn back to OFF to finish reset: OF
ページ15に含まれる内容の要旨
LiveView setting After 5 minutes, you will get the video of 9060A-MP. If system inquire to download ActiveX please select YES / download Most of upside function key (such as Administration Update and ETC) can only be used by Administrator. Image Setting Setting windows is on the left; it’s used to set up image parameter. 1. Resolution: User can choose right resolution on the basis of your requirement and net condition. 2. Picture Quality: The picture was compressed to JPEG
ページ16に含まれる内容の要旨
3. Anti-Flicker: You can get top-quality picture for we had set up the picture condition on the basis of different illumination environment. You can choose environment such as “Out Door”,” indoor 50hz AC illumination” or ” indoor 60hz illumination ”. Note: Please do select “ Outdoor “ when you monitor outdoor at daytime or 9060A-MP (Mega Pixels) receive all the light and video will over bright. 4. Audio The audio is closed in default mode, and users can turn it on.
ページ17に含まれる内容の要旨
Advanced quick setting Advanced menu will be display when right click mouse on the image windows, you can set up image, record AVI, record WMV, zoom, motion detect, splits, rotate, set time, and set pictures path. The function can be set in other web page of 9060A-MP 17
ページ18に含まれる内容の要旨
1. Image: parameter setting Right click mouse on the motion image, choose “image” can open corresponding windows. Users can adjust Brightness, Contrast, Saturation, Sharpness, Smooth and Awb(Auto White Balance). Click “rotate” will circumrotate the image. Click “reset” will back to default setting. 2. Record AVI: Right click mouse on the motion image, choose “record AVI ” can open corresponding windows. Users can adjust the setting parameter of AVI Frame Rate, file name and directo
ページ19に含まれる内容の要旨
If select “ For playback \on most pocket PCs: record smaller file than select to ““ For local playback” 4. Zoom Right click mouse on the motion image and choose “zoom”. Users use mouse to draw a frame round to select image, let go will be amplificatory to old image, when right click mouse again, the image will revert. 19
ページ20に含まれる内容の要旨
5. Motion detect In this page, you can enable Motion detection function and setup the pictures saving direction: in PC / by e-mail / save in Ftp. The resolution of detect pictures is 1600x 1200. Use this function need to enabled Event of Event Trigger page first (click submit to save setting after select). Motion Detection can set up the environment parameter of event trigger. 1. Area 1 is red frame Trigger happened in this scope, it will show red words - MD1 Warning!! 2
