ページ1に含まれる内容の要旨
®
P H A S E R 7 4 0 a n d 7 4 0 L
LA SER PRIN T E RS
Setup Guide
®
www.tek.com/Color_Printers/
ページ2に含まれる内容の要旨
® Phaser 740 and 740L Laser Printers Setup Guide First printing August 1998 063-3101-00
ページ3に含まれる内容の要旨
Copyright © Tektronix, Inc. Unpublished rights reserved under the copyright laws of the United States. Contents of this publication may not be reproduced in any form without permission of Tektronix, Inc. ® ® ® ® ® Tektronix , Phaser , PhaserShare , the TekColor icon, and Made For Each Other are registered trademarks of Tektronix, Inc. PhaserLink™, PhaserPrint™, PhaserSym™, Phas
ページ4に含まれる内容の要旨
® Phaser 740 and 740L Printer Warranty Tektronix warrants that the Phaser 740 and 740L Printers will be free from defects in materials and workmanship for a period of one (1) year from the date of shipment. If the product proves defective during the respective warranty period, Tektronix, at its option, will repair the
ページ5に含まれる内容の要旨
User safety summary Terms in manual: CAUTION Conditions that can result in damage to the product. WARNING Conditions that can result in personal injury or loss of life. Power source: Do not apply more than 250 volts RMS between the supply conductors or between either supply conductor or ground. Use only the specified power cord and connector. Refer to a qualified service technician for changes to the cord or connector. Operation of product: Avoid electric shock by contacting a qualified ser
ページ6に含まれる内容の要旨
When you operate this equipment, the socket outlet should be near the equipment and be easily accessible. DANGER: CAUTION: VORSICHT: ATTENTION: Invisible laser radiation Invisible laser radiation Unsichtbare Laserstrahlung, Rayonnement laser invisible when open and interlock when open and wenn Abdeckung geöffnet dangereux en cas defeated. interlocks defeated. und Sicherheitsverriegelung d'ouverture et lorsque AVOID DIRECT AVOID DIRECT überbrückt. la sécurité est neutralisée. EXPOSURE TO BEAM. EX
ページ7に含まれる内容の要旨
ページ8に含まれる内容の要旨
ページ9に含まれる内容の要旨
Getting Set Up At a glance Page Unpack 2 n Take inventory 2 n Remove the packing material 4 Set up the printer 5 n Select a location 5 n Move the printer (and optional Lower Tray Assembly) 6 n Install toner cartridges 9 n Prepare imaging unit 11 n Load media 12 n Connect the printer 17 n Turn on the printer 20 n Select a front panel language 21 Make a print 22 Install printer software on your computer 24 n Register your printer 33 Where to go from here 34 Setup Guide 1
ページ10に含まれる内容の要旨
Getting Set Up Unpack the printer Take inventory 1. Documentation n Setup overview poster n Setup Guide (this book) n PhaserShare Networking Setup Guide n Supplies information kit n User Guide 2. Printer CD-ROMs (2) 3. Power cord 4. Parallel cable adapter 5. Toner cartridge(s) The Phaser 740L printer ships with only one (black) toner cartridge. 6. Media sampler 7. * Automatic Duplex/Lower Tray Assembly (order number ZDPLX): n Lower Tray Assembly n DUPLEX unit n PAPER tray n TRANSPARENCY tra
ページ11に含まれる内容の要旨
Getting Set Up 1 3 4 2 5 6 7 8 9 3101-02a Setup Guide 3
ページ12に含まれる内容の要旨
Getting Set Up Remove the packing material N O T E Save all packing material in case moving or subsequent shipment is necessary. 1. Remove the plastic bag from the printer. Pull down the plastic skirt to expose the printer. 3101-03 2. If you ordered an optional Automatic Duplex/Lower Tray Assembly, unpack it now. 4 Phaser 740 and 740L Laser Printers
ページ13に含まれる内容の要旨
Getting Set Up Set up the printer Select a location Make sure that the location for the printer is level and strong. The printer weighs 43 kg. (94 lbs.); the optional Automatic Duplex/Lower Tray Assembly weighs 14 kg (31 lbs.). (153 mm) (1005 mm) (501 mm) 6.0 in. 39.6 in. 19.7 in. (464 mm) 18.3 in. (679 mm) 26.7 in. 3101-01 (507 mm) 20 in. Setup Guide 5
ページ14に含まれる内容の要旨
Getting Set Up Lift the printer W A R N I N G The printer weighs about 43 kg. (94 lbs.); observe standard precautions for lifting heavy objects. To lift the printer from its shipping pallet, use the indents at the front and back of the printer for your hands, as shown in this illustration. 43 kg 94 lb. 3101-22 6 Phaser 740 and 740L Laser Printers
ページ15に含まれる内容の要旨
Getting Set Up If you ordered an optional Automatic Duplex/Lower Tray Assembly W A R N I N G The printer weighs about 43 kg. (94 lbs.) and the Lower Tray Assembly weighs about 14 kg (31 lbs.). Observe standard precautions for lifting heavy objects. The printer is not permanently attached to the Automatic Duplex/Lower Tray Assembly. When you move the printer, move the pieces separately; moving the printer incorrectly may damage it and may cause personal injury. 1. Place the Lower Tray Assemb
ページ16に含まれる内容の要旨
Getting Set Up Remove adhesive tape 1. Remove all adhesive tape that holds the printer’s doors shut. 2. Remove the adhesive tape that holds the output tray against the printer. 3. Gently lower the tray to its operating position. 2 3 1 3101-08 8 Phaser 740 and 740L Laser Printers
ページ17に含まれる内容の要旨
Black Cyan Magenta Getting Set Up Install the toner cartridges Install the toner cartridges The toner cartridges are shipped in the packing tray under the foam. N O T E If you have a Phaser 740L printer, refer to page 10 before installing the toner cartridge. 1. Remove each toner cartridge from its packaging. Make sure that you remove all tape. 2. Remove the shipping cover from each cartridge. 3. Open the printer’s right side door. 3 1 2 3101-05 4. Install each cartridge in the slot labeled
ページ18に含まれる内容の要旨
Black Cyan Magenta Getting Set Up Phaser 740L printers The Phaser 740L printer includes only a black toner cartridge in the printer box. Read the following information, then follow the instructions on page 9 to install the cartridge. Remove only when adding optional color Order 740LCS Color Kit 3101-27 If you ordered a Phaser 740L Color Kit n The Phaser 740L Color Kit (order number Z740LCS) is shipped separately and includes three color toner cartridges (cyan, magenta, and yellow). The kit
ページ19に含まれる内容の要旨
Getting Set Up Prepare the imaging unit 1. Open the printer’s front door. 2. Turn the upper blue lever to the up position: align the lever’s triangle with the triangle on the surface of the imaging unit. 3. Close the printer’s front door. 2 13 3101-07 Setup Guide 11
ページ20に含まれる内容の要旨
Getting Set Up Add paper or transparencies Remove the paper tray 3101-10 12 Phaser 740 and 740L Laser Printers A4 Paper
