ページ1に含まれる内容の要旨
3-081-835-11(1)
Getting started ________________________
Shooting still images __________________
Digital Still Camera
Viewing still images ___________________
Operating Instructions
Before operating the unit, please read this manual thoroughly, and Deleting still images ___________________
retain it for future reference.
Before advanced operations _____________
Owner’s Record
The model and serial numbers are located on the bottom. Record the
serial number in the space provided below. Refer to
ページ2に含まれる内容の要旨
CAUTION If you have any questions about this product, you may call: WARNING The use of optical instruments with this Sony Customer Information Center product will increase eye hazard. To prevent fire or shock hazard, do 1-800-222-SONY (7669) Use of controls or adjustments or not expose the unit to rain or performance of procedures other than those The number below is for the FCC related matters moisture. specified herein may result in hazardous only. radiation exposure. Regulatory In
ページ3に含まれる内容の要旨
CAUTION RECYCLING LITHIUM-ION CAUTION You are cautioned that any changes or BATTERIES TO PREVENT ELECTRIC SHOCK, DO NOT modifications not expressly approved in this USE THIS POLARIZED AC PLUG WITH AN Lithium-Ion batteries are manual could void your authority to operate this recyclable. EXTENSION CORD, RECEPTACLE OR equipment. OTHER OUTLET UNLESS THE BLADES You can help preserve our CAN BE FULLY INSERTED TO PREVENT environment by returning your Note: BLADE EXPOSURE. used rechargeable ba
ページ4に含まれる内容の要旨
Before using your camera This digital still camera uses 8 cm CD-Rs/CD- No compensation for contents of the Do not shake or strike the camera RWs as recording media. “CD-R” or “CD-RW” recording In addition to malfunctions and inability to record mentioned above is indicated as “disc” in this images, this may render the discs unusable or Contents of the recording cannot be compensated manual. When a distinction between CD-Rs and image data breakdown, damage or loss may for if recording or
ページ5に含まれる内容の要旨
Clean the flash surface before use Notes on the camera locations Trademarks The heat of flash emission may cause dirt on the Do not use the camera near a location that “InfoLITHIUM” is a trademark of Sony flash surface to become discolored or to stick to generates strong radio wave or emits radiation. Corporation. the flash surface, resulting in insufficient light The camera may not be able to record or play Microsoft and Windows are registered emission. back properly. trademarks of the
ページ6に含まれる内容の要旨
Table of contents Before using your camera ......................... 4 Adjusting the exposure Viewing still images Introduction...............................................8 — EV adjustment ...........................46 Viewing images on the LCD screen of your Identifying the parts ................................. 9 Selecting the metering mode...................47 camera ............................................ 31 Adjusting color tones Getting started Viewing images on a TV screen.....
ページ7に含まれる内容の要旨
Copying images using the Windows XP Advanced still image viewing Enjoying movies AutoPlay Wizard.............................86 Selecting the folder and playing back Shooting movies ..................................... 70 Viewing images on your computer .....87 images Viewing movies on the LCD screen....... 71 Creating a Video CD...........................87 — Folder.........................................59 Deleting movies — Delete...................... 72 For Mac OS X (v10.0/v10.1/v10.2) E
ページ8に含まれる内容の要旨
Introduction This digital still camera is capable of Flow chart for disc operations recording still images and movies onto 8 cm : CD-R Start CD-R/CD-RW discs. : CD-RW A new disc Capture images with your computer Initialize You can easily copy images onto your (page 19) computer through a CD-ROM drive or the Recording is complete. Preparation for recording USB cable, and view and modify images on on a disc View on the camera your computer using application software. (page 31) When using a C
ページ9に含まれる内容の要旨
Use a tripod with a screw length of less than 5.5 Identifying the parts mm (7/32 inch). You will be unable to firmly secure the camera to tripods having longer screws, and may damage the camera. See the pages in parentheses for details of operation. Do not touch the microphone while recording. The “3.2 MEGA PIXELS” indicated on the 1 8 camera shows the number of effective pixels. The number of actually recorded pixels is 2 9 maximum 3.1 MEGA PIXELS. The effective pixels number is d
ページ10に含まれる内容の要旨
J Hook for shoulder strap K Zoom button (for shooting) (24)/ Index button (for viewing) (32) 1 9 L (Image Size/Delete) 2 button (20, 35) 3 q; 4 qa 5 6 7 8 qs A ACCESS lamp (18) I Mode dial (16) : To shoot still images in auto B /CHG (charge) lamp (12) C LCD screen adjustment mode D Speaker : To shoot still images in E Control button programmed mode (Menu on) (v/V/b/B/z) SCN: To shoot in the Scene (Menu off) ( / /7/) (27, 26, Selection mode 24, 25) SET UP: To set the SET UP items F MENU but
ページ11に含まれる内容の要旨
Getting started Getting started Charging the battery pack DC IN jack cover DC plug Battery eject lever AC Adaptor 1 2 3 , Open the battery cover. , Install the battery pack, then , Open the DC IN jack cover and close the battery cover. connect the AC Adaptor Slide the cover in the direction of the arrow. (supplied) to the DC IN jack of Insert the battery pack with the b mark your camera. Be sure to turn off your camera when facing toward the battery compartment as charging the battery pa
ページ12に含まれる内容の要旨
To remove the battery pack Battery remaining indicator 2 To wall outlet The battery remaining indicator on the LCD screen shows the remaining shooting or viewing Power cord time. 60min 101 3.1M 4 M AF 1 AC Adaptor 4 Battery eject lever , Connect the power cord to the Open the battery cover. Slide the battery The black portion of the battery remaining AC Adaptor and then to a wall indicator in the illustration shows the actual eject lever in the direction of the arrow, and outlet. remain
ページ13に含まれる内容の要旨
Getting started 3) Number of images and battery Shooting still images Shooting movies 1) life that can be recorded/ Under the average conditions NP-FM50 (supplied) viewed NP-FM50 (supplied) Battery life (min.) Image size No. of Battery life Continuous shooting Approx. 150 The tables show the approximate number of images (min.) images and the battery life that can be recorded/ 3) Shooting continuously at 160 (Mail) image 3.1M Approx. 270 Approx. 135 viewed when you shoot images in normal mode
ページ14に含まれる内容の要旨
Using an external power source Using your camera abroad Power sources 2 To wall outlet You can use your camera in any country or region with the supplied AC Adaptor within Power cord 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor DC IN jack cover [a], if necessary, depending on the design of 1 the wall outlet [b]. DC plug AC Adaptor AC-L15A/L15B AC Adaptor 1 2 , Open the DC IN jack cover and , Connect the power cord to the connect the AC Adaptor AC Adaptor and
ページ15に含まれる内容の要旨
Getting started Turning on/off your camera How to use the control button Auto power-off function POWER If you do not operate the camera for about 0EV POWER button three minutes during shooting or viewing or 0EV when performing SET UP, the camera turns EV WB ISO off automatically to prevent wearing down POWER lamp the battery. The auto power-off function only operates when the camera is operating 400 using a battery pack. The auto power-off 200 100 Auto function also will not operate in th
ページ16に含まれる内容の要旨
Setting the date and time Mode dial Clock Set Clock Set Y/M/D Y/M/D M/D/Y M/D/Y D/M/Y D/M/Y POWER 2003/: 1 / 1 12 00 OK 2003/: 1 / 1 12 00 OK AM AM Cancel Cancel OK OK POWER button 1 2 3 , Set the mode dial to . , Press POWER to turn on the , Select the desired date display power. format with v/V on the control You can also carry out this operation when the button, then press z. The POWER lamp (green) lights up and the mode dial is set to , SCN, or . To change the date and time, se
ページ17に含まれる内容の要旨
Getting started Clock Set Clock Set Y/M/D Y/M/D Clock Set Y/M/D M/D/Y M/D/Y M/D/Y D/M/Y D/M/Y D/M/Y 2003/: 1 / 1 12 00 OK 2003/: 7 / 1 12 00 OK 2003 4 /: 7 / 10 30 OK AM AM AM Cancel Cancel Cancel OK OK OK 4 5 6 , Select the year, month, day, , Set the numeric value with v/V , Select [OK] with B on the hour or minute item you want on the control button, then control button, then press z. to set with b/B on the control press z to enter it. The date and time are entered and the clock butto
ページ18に含まれる内容の要旨
Shooting still images Inserting and removing a disc Disc cover OPEN lever Pickup lens Disc 1 2 3 Push here , Open the disc cover. , Place a disc in the disc tray. , Close the disc cover. Removing the disc Slide down the disc cover OPEN lever, and Place the disc with the printed side up, and Open the disc cover. Check to make sure that the open the disc cover. push down on the center of the disc until it disc has completely stopped rotating, then remove clicks. the disc. You can use only
ページ19に含まれる内容の要旨
Shooting still images Initializing a disc What is initialization? Mode dial Initialize Initialize Initialize Avoid any vibration Avoid any vibration Ready to initialize Initialize in progress Initialize complete Initialization is required to record images on a disc. When you perform finalization (page 75) using your camera to view images through a CD-ROM drive, initialization is also automatically performed, and you can continue to record images. Images recorded before finalization remain
ページ20に含まれる内容の要旨
Setting the still image size Mode dial VGA 3.1M 3.1M 3.1M 2.8M(3:2) 2.8M(3:2) 2.0M 2.0M 1.2M 1.2M VGA VGA Image Size Image Size 1 2 3 , Set the mode dial to and , Press (Image Size). , Select the desired image size turn on the power. with v/V on the control button. The Image Size setup appears. The image size is set. You can also carry out this operation when the For details on the image size, see page 21. When the setting is complete, press mode dial is set to or SCN. (Image Size) so
