ページ1に含まれる内容の要旨
4-456-210-21(1)
Digital Still Camera / Instruction Manual GB
Cámara fotografía digital / Manual de instrucciones ES
DSC-TX30
ページ2に含まれる内容の要旨
English Learning more about the camera (“Cyber-shot User Guide”) “Cyber-shot User Guide” is an on-line manual. Refer to it for in-depth instructions on the many functions of the camera. 1 Access the Sony support page. http://www.sony.net/SonyInfo/Support/ 2 Select your country or region. 3 Search for the model name of your camera within the support page. � Check the model name on the bottom of your camera. Checking the supplied items The number in parentheses indicates the number of pieces. •
ページ3に含まれる内容の要旨
Owner’s Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call your Sony dealer regarding this product. Model No. DSC-TX30 Serial No. _____________________________ Model No. AC-UB10/AC-UB10B/AC-UB10C/AC-UB10D Serial No. _____________________________ GB WARNING To reduce fire or shock hazard, do not expose the unit to rain or moisture. IMPORTANT SAFETY INSTRUCTIONS -SAVE THESE INSTRUCTIONS DA
ページ4に含まれる内容の要旨
� Be sure to charge the battery pack using a genuine Sony battery charger or a device that can charge the battery pack. � Keep the battery pack out of the reach of small children. � Keep the battery pack dry. � Replace only with the same or equivalent type recommended by Sony. � Dispose of used battery packs promptly as described in the instructions. [ AC Adaptor Use the nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the AC Adaptor from the wall outlet (wall socket) imm
ページ5に含まれる内容の要旨
For Customers in the U.S.A. UL is an internationally recognized safety organization. The UL Mark on the product means it has been UL Listed. If you have any questions about this product, you may call: Sony Customer Information Center 1-800-222-SONY (7669). The number below is for the FCC related matters only. GB [ Regulatory Information Declaration of Conformity Trade Name: SONY Model No.: DSC-TX30 Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo, San Diego, CA 92127 U.S.A. T
ページ6に含まれる内容の要旨
For Customers in Europe [ Notice for the customers in the countries applying EU Directives This product has been manufactured by or on behalf of Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. Inquiries related to product compliance based on European Union legislation shall be addressed to the authorized representative, Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters, please refer to the addresses provided in the se
ページ7に含まれる内容の要旨
[ Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead. By ensuring th
ページ8に含まれる内容の要旨
About water-proof, dust-proof, and shock-proof performance of the camera This camera has enhanced water-proof, dust-proof and shock-proof protection. Damage caused from misuse, abuse or failure to properly maintain the camera is not covered by the limited warranty. � This camera is water-proof/dust-proof equivalent to IEC60529 IP68. The camera is operable up to a water depth of 10 m (33 ft.) for 60 minutes. � Do not subject the camera to pressurized water, such as from a tap. � Do not use in
ページ9に含まれる内容の要旨
� If dirt or sand gets on the sealing gasket or its mating surfaces, wipe the area clean with a soft cloth that will not leave behind any fibers. Prevent the sealing gasket from becoming scratched by touching it while charging a battery or using a cable. � Do not open/close the battery/memory card cover with wet or sandy hands or near water. There is a risk this will lead to sand or water getting inside. Before opening the cover, perform the procedure described in “Cleaning after using the
ページ10に含まれる内容の要旨
� Allow the camera to sit in pure water poured into a cleaning bowl for about 5 minutes. Then, gently shake the camera, press each button, slide the zoom lever or the lens cover inside the water, to clean away any salt, sand or other matter lodged around the buttons or the lens cover. � After rinsing, wipe away water drops with a soft cloth. Allow the camera to dry completely in a shady location with good ventilation. Do not blow dry with a hair dryer as there is a risk of deformation and/o
ページ11に含まれる内容の要旨
Identifying parts A Lens cover B Flash C Self-timer lamp/Smile Shutter lamp/AF illuminator D Lens E LED light GB F Microphone G MOVIE (Movie) button H OLED screen/Touch panel I Speaker (built-in) J ON/OFF (Power) button K W/T (Zoom) lever L Shutter button M Hook for wrist strap N Multi/Micro USB Terminal* O Charge lamp P Memory card slot Q Battery eject lever R Battery/memory card cover S Battery insertion slot T Access lamp U HDMI micro jack V Tripod receptacle � Use a tripod with a screw les
ページ12に含まれる内容の要旨
Inserting the battery pack Battery eject lever Open the cover. 1 Insert the battery pack. 2 � Align the battery pack with the guide inside the battery insertion slot. Insert the battery pack until the battery eject lever locks into place. � Securely close the battery cover until you hear the slide lock on the cover catch in place and so that the yellow mark under the slide lock can no longer be seen. � Closing the cover with the battery inserted incorrectly may damage the camera. GB 12
ページ13に含まれる内容の要旨
Charging the battery pack For customers in the USA, Canada GB Charge lamp Power cord Lit: Charging (Mains lead) Off: Charging finished Flashing: For customers in countries/regions Charging error or other than the USA and Canada charging paused temporarily because the camera is not within the proper temperature range Open the battery/memory card cover and connect the 1 camera and the AC Adaptor (supplied), using the micro USB cable (supplied). Connect the AC Adaptor to the wall outlet (
ページ14に含まれる内容の要旨
Notes � If the Charge lamp on the camera flashes when the AC Adaptor is connected to the wall outlet (wall socket), this indicates that charging is temporarily stopped because the temperature is outside the recommended range. When the temperature gets back within the appropriate range, the charging resumes. We recommend charging the battery pack in an ambient temperature of between 10°C to 30°C (50 ºF to 86 ºF). � The battery pack may not be effectively charged if the terminal section of th
ページ15に含まれる内容の要旨
x Charging by connecting to a computer The battery pack can be charged by connecting the camera to a computer using a micro USB cable. GB To a USB jack Notes � Note the following points when charging via a computer: – If the camera is connected to a laptop computer that is not connected to a power source, the laptop battery level decreases. Do not charge for an extended period of time. – Do not turn on/off or restart the computer, or wake the computer to resume from sleep mode when a USB con
ページ16に含まれる内容の要旨
x Battery life and number of images that can be recorded and played back Battery life Number of images Shooting (still images) Approx. 125 min. Approx. 250 images Typical movie shooting Approx. 30 min. — Continuous movie shooting Approx. 60 min. — Viewing (still images) Approx. 180 min. Approx. 3600 images Notes � The above number of images applies when the battery pack is fully charged. The number of images may decrease depending on the conditions of use. � The number of images that can be re
ページ17に含まれる内容の要旨
x Supplying power The camera can be supplied with power from the wall outlet (wall socket) by connecting to the AC Adaptor, using the micro USB cable (supplied). You can import images to a computer without worrying about draining the battery pack by connecting the camera to a computer using the micro USB cable. In addition, you can use the AC Adaptor AC-UD10 (sold separately) or AC-UD11 (sold separately) for shooting to supply power when shooting. GB Notes � Power cannot be supplied when the
ページ18に含まれる内容の要旨
Inserting a memory card (sold separately) “Memory Stick microSD memory Micro” media (M2) card Terminal Printing surface Make sure that the correct side is facing up. Open the cover. 1 Insert the memory card (sold separately). 2 � With the camera lens facing upward, as illustrated, insert the memory card straight in until it clicks into place. � Pushing down on the microSD memory card (in the direction of the battery insertion slot) while inserting it may damage the camera. � Be careful whe
ページ19に含まれる内容の要旨
Check the icon displayed on the upper right screen and 4 make sure the memory card is inserted correctly. � A: The memory card is inserted correctly. � B: The memory card is not inserted correctly. Confirm the direction of the memory card and reinsert it straight into the camera. GB � Only one memory card can be inserted. x Memory cards that can be used Memory card For still images For movies Memory Stick Micro — A Memory Stick Micro (Mark2) microSD memory card (Class 4 or faster) B microS
ページ20に含まれる内容の要旨
Setting the clock ON/OFF (Power) button Lens cover Lower the lens cover. 1 The camera is turned on. Date & Time setting is displayed when you turn on the camera for the first time. � You can also turn on the camera by pressing the ON/OFF (Power) button. � It may take time for the power to turn on and allow operation. Select a desired language. 2 Select a desired geographic location by following the 3 on-screen instructions, then touch [Next]. Set [Daylight Savings] or [Summer Time], [Date & T
