ページ1に含まれる内容の要旨
4-269-986-21(1)
GB
DSC-T110/T110D
GB Digital Still Camera/Instruction Manual
ES
ES Cámara fotografía digital/Manual de instrucciones
© 2011 Sony Corporation
ページ2に含まれる内容の要旨
English Owner’s Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call your Sony dealer regarding this product. Model No. DSC-T110/T110D Serial No. ______________________________ WARNING To reduce fire or shock hazard, do not expose the unit to rain or moisture. If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for the power o
ページ3に含まれる内容の要旨
� Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or in a car parked in the sun. � Do not incinerate or dispose of in fire. � Do not handle damaged or leaking lithium ion batteries. � Be sure to charge the battery pack using a genuine Sony battery charger or a device that can charge the battery pack. � Keep the battery pack out of the reach of small children. � Keep the battery pack dry. � Replace only with the same or equivalent type recommended by Sony. � Disp
ページ4に含まれる内容の要旨
For Customers in the U.S.A. UL is an internationally recognized safety organization. The UL Mark on the product means it has been UL Listed. If you have any questions about this product, you may call: Sony Customer Information Center 1-800-222-SONY (7669) The number below is for the FCC related matters only. [ Regulatory Information Declaration of Conformity Trade Name: SONY Model No.: DSC-T110, DSC-T110D Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo, San Diego, CA 92127 U
ページ5に含まれる内容の要旨
[ Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that in
ページ6に含まれる内容の要旨
[ Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences
ページ7に含まれる内容の要旨
Table of contents Getting started Refer to “Cyber-shot Handbook” (PDF) on supplied CD-ROM.....................................................................................8 Checking the accessories supplied...........................................8 Notes on using the camera........................................................8 Identifying parts .......................................................................11 Battery charging and the number of images/time that can be recorded .
ページ8に含まれる内容の要旨
Refer to “Cyber-shot Handbook” (PDF) on supplied CD-ROM For details on advanced operations, please read “Cyber- shot Handbook” (PDF) on the CD-ROM (supplied) using a computer. Refer to “Cyber-shot Handbook” for in-depth instructions on shooting or viewing images and connecting the camera to your computer, printer or TV (page 24). Checking the accessories supplied � Battery charger BC-CSN/BC-CSNB (1) � Power cord (mains lead) (not supplied in the USA and Canada) (1) � Rechargeable battery pac
ページ9に含まれる内容の要旨
Functions built into this camera This manual describes each of the functions of TransferJet-compatible/ incompatible devices. To check if your camera supports the TransferJet function, check for the following mark on the bottom of the camera. TransferJet-compatible device: (TransferJet) On database files When you insert a memory card without a database file into the camera and turn on the power, part of the memory card capacity is used to automatically create a database file. It may take som
ページ10に含まれる内容の要旨
� If water droplets or other liquids splash on the LCD screen and make it wet, immediately wipe off the screen with a soft cloth. Leaving liquids on the LCD screen surface can harm the quality and cause a malfunction. � Do not press against the LCD screen. The screen may be discolored and that may cause a malfunction. Please use Sony genuine accessories If you use accessories manufactured by companies other than Sony, this could cause a camera trouble. � Using other manufacturers’ camera cas
ページ11に含まれる内容の要旨
Identifying parts A Zoom (W/T) lever B Shutter button C Microphone D ON/OFF (Power) button/ Power lamp E Flash F Self-timer lamp/Smile Shutter lamp/AF illuminator G Lens H Lens cover GB I LCD screen/Touch panel J Speaker K (Playback) button L Hook for wrist strap M Battery insertion slot N Tripod receptacle � Use a tripod with a screw less than 5.5 mm (7/32 inches) long. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur. O Battery/Memory card cover P Multi
ページ12に含まれる内容の要旨
Battery charging and the number of images/time that can be recorded Insert the battery pack into the 1 battery charger. � You can charge the battery even when it is partially charged. Battery pack Connect the battery For customers in the USA and 2 Canada charger to the wall Plug outlet (wall socket). If you continue charging the battery pack for about one more hour after the CHARGE lamp turns off, the charge will last slightly longer (full charge). CHARGE lamp CHARGE lamp Lit: Chargi
ページ13に含まれる内容の要旨
x Charging time Full charge time Normal charge time Approx. 245 min. Approx. 185 min. Notes � The table above shows the time required to charge a fully depleted battery pack at a temperature of 25°C (77°F). Charging may take longer depending on conditions of use and circumstances. � Connect the battery charger to the nearest wall outlet (wall socket). � When charging is finished, disconnect the power cord (mains lead) and the battery charger from the wall outlet (wall socket), and remove the
ページ14に含まれる内容の要旨
� The number of still images that can be recorded is based on the CIPA standard, and is for shooting under the following conditions. (CIPA: Camera & Imaging Products Association) – [LCD Brightness] is set to [Normal]. – Shooting once every 30 seconds. – The zoom is switched alternately between the W and T ends. – The flash strobes once every two times. – The power turns on and off once every ten times. � The battery life for movies is when shooting under the following conditions: – Recording mo
ページ15に含まれる内容の要旨
Inserting the battery pack/a memory card (sold separately) Open the cover. 1 Insert a memory card 2 (sold separately). GB With the notched corner facing as illustrated, insert the memory card until it clicks into place. Note the notched corner facing the correct direction. Insert the battery pack. 3 Align the battery pack with the guide arrow inside the battery insertion slot. Then, insert the battery pack until the battery eject lever locks into place. Battery eject lever Close the cov
ページ16に含まれる内容の要旨
x Memory card that you can use The following memory cards are compatible with this camera: “Memory Stick PRO Duo” media, “Memory Stick PRO-HG Duo” media, “Memory Stick Duo” media, SD memory card, SDHC memory card and SDXC memory card. However, all memory cards are not guaranteed to work with this camera. MultiMediaCard cannot be used. � In this manual, the term “Memory Stick Duo” media is used to refer to “Memory Stick PRO Duo” media, “Memory Stick PRO-HG Duo” media and “Memory Stick Duo”
ページ17に含まれる内容の要旨
x When there is no memory card inserted Images are stored in the camera’s internal memory (approximately 23 MB). To copy images from the internal memory to a memory card, insert a memory card in the camera, then touch t (Settings) t (Memory Card Tool) t [Copy]. x To remove the battery pack Battery eject lever Slide the battery eject lever. Be sure not to drop the battery pack. GB x Checking the remaining battery charge A remaining charge indicator appears on the LCD screen. High Low Notes �
ページ18に含まれる内容の要旨
Setting the date and time/display color Lower the lens cover. 1 The camera is turned on. The power lamp lights up only when the camera starts up. � You can also turn on the camera by pressing the ON/OFF (Power) button. � It may take time for the power to turn on and allow operation. ON/OFF (Power) button Lens cover Select the desired date display format, then touch 2 [OK]. Select Daylight Savings [On]/[Off], then touch [OK]. 3 Select the item to be set, then set the value with v/V 4 and t
ページ19に含まれる内容の要旨
x Setting the date and time again The date and time setup screen appears automatically only when the power is turned on the first time. To reset the date and time, display the date and time setup screen by touching t (Settings) t (Clock Settings) t [Date & Time Setting]. GB GB 19
ページ20に含まれる内容の要旨
Shooting still images Lower the lens cover. Lens cover 1 Hold the camera steady as 2 illustrated. � Slide the zoom (W/T) lever to the T side to zoom. Slide to the W side to return. Press the shutter button 3 Shutter button halfway down to focus. When the image is in focus, a beep sounds and the z indicator lights. AE/AF lock Press the shutter button 4 fully down. GB 20
