ページ1に含まれる内容の要旨
AR-5316-5320-EX.book 1 ページ ２０ ０５年 ４月８ 日 金 曜日 午前９ 時３５ 分
MODEL
AR-5316
DIGITAL MULTIFUNCTIONAL
SYSTEM
OPERATION MANUAL
Page
• BEFORE USING
THE MACHINE 8
• COPY FUNCTIONS 18
• PRINTER FUNCTIONS 29
• USER SETTINGS 31
• TROUBLESHOOTING 40
• ROUTINE MAINTENANCE 56
• PERIPHERAL DEVICES
AND SUPPLIES 60
• APPENDIX 62
HINA
KS2
QSZZ
ページ2に含まれる内容の要旨
➢ ➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣ ➢ AR-5316-5320-EX.book 1 ページ ２０ ０５年 ４月８ 日 金 曜日 午前９ 時３５ 分 ➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣ FOR YOUR RECORDS ... To protect against loss or theft, record and retain for reference the copier’s serial number located on the back of the unit. Model Number Serial Number Date of Purchase Place of Purchase Authorized Sharp Copier Service Department Number Do not make copies of anything which is prohibited from copying by law. The following items are normally prohibited from copy
ページ3に含まれる内容の要旨
AR-5316-5320-EX.book 1 ページ ２０ ０５年 ４月８ 日 金 曜日 午前９ 時３５ 分 CONTENTS CAUTIONS................................................................................................................................................. 3 CAUTIONS ON USING..................................................................................................................................... 3 IMPORTANT POINTS WHEN SELECTING AN INSTALLATION SITE ........................................................... 3 CAU
ページ4に含まれる内容の要旨
!Chapter0.fm 2 ページ ２０ ０５年 ４月８ 日 金 曜日 午前１ １時４ ２分 6 ROUTINE MAINTENANCE CHECKING THE TOTAL OUTPUT COUNT AND TONER LEVEL........................................ 56 CHECKING THE TOTAL OUTPUT COUNT...56 CHECKING THE TONER LEVEL AND DRUM CARTRIDGE LIFE ........................................... 57 TONER LEVEL ...............................................57 DRUM CARTRIDGE LIFE ..............................57 ROUTINE MAINTENANCE.............................. 58 CLEANING THE DOCUMENT GLA
ページ5に含まれる内容の要旨
AR-5316-5320-EX.book 3 ページ ２０ ０５年 ４月８ 日 金 曜日 午前９ 時３５ 分 CAUTIONS Follow the cautions below when using this machine. CAUTIONS ON USING Warning: The fusing area is hot. Exercise care in this area when removing misfed paper. Do not look directly at the light source. Doing so may damage your eyes. Caution: Do not switch the machine rapidly on and off. After turning the machine off, wait 10 to 15 seconds before turning it back on. Machine power must be turned off before installing any supp
ページ6に含まれる内容の要旨
AR-5316-5320-EX.book 4 ページ ２０ ０５年 ４月８ 日 金 曜日 午前９ 時３５ 分 The machine should be installed near an accessible power outlet for easy connection and disconnection. Be sure to connect the power cord only to a power outlet that meets the specified voltage and current requirements. Also make certain the outlet is properly grounded. Connect the machine to a power outlet which is not used for other electric appliances. If a lighting fixture is Note connected to the same outlet, the light may flicker.
ページ7に含まれる内容の要旨
!Chapter0.fm 5 ページ ２０ ０５年 ５月１ ２日 木曜日 午後 ７時１ ４分 ENVIRONMENTAL INFORMATION ® As an ENERGY STAR Partner, SHARP has determined that this product meets ® the ENERGY STAR guidelines for energy efficiency. The Environmental Choice Program guidelines are applied to the products only in Canada. The products that meet the Environmental Choice Program guidelines carry the logo shown to the left. The products without the logo may not meet the Environmental Choice Program guidelines. USING THE MANUAL
ページ8に含まれる内容の要旨
AR-5316-5320-EX.book 6 ページ ２０ ０５年 ４月８ 日 金 曜日 午前９ 時３５ 分 CONVENTIONS USED IN THIS MANUAL Warns the user that injury may result if the contents of the warning are not properly followed. Warning Cautions the user that damage to the machine or one of its components may result if the contents Caution of the caution are not properly followed. Notes provide information relevant to the machine regarding specifications, functions, Note performance, operation and such, that may be useful to the user.
ページ9に含まれる内容の要旨
AR-5316-5320-EX.book 7 ページ ２０ ０５年 ４月８ 日 金 曜日 午前９ 時３５ 分 MAIN FEATURES High-speed laser copying 1 2 First-copy time* at 300 dpi* is only 7.2 seconds . Copying speed is 16 copies per minute. This is ideal for business use and provides a big boost to workplace productivity. 1 * First-Copy time may vary depending on the power-supply voltage, ambient temperature, and other operating conditions. 2 * "dpi" ("dots per inch") is unit that is used to measure resolution. Resolution indicates how muc
ページ10に含まれる内容の要旨
!Chapter1.fm 8 ページ ２０ ０５年 ４月１ ２日 火曜日 午後 ３時４ ９分 Chapter 1 BEFORE USING THE MACHINE 1 This chapter contains basic information that should be read before using the machine. PART NAMES AND FUNCTIONS 1 2 7 6 2 16 3 4 17 4 10 5 8 11 15 9 12 13 14 1 Glass cleaner 9 Paper tray Use to clean the original scanning glass. Paper tray holds 250 sheets of paper. (p.14) 2 Document feeder cover (when the SPF is installed) 10 Side cover /document cover Open to remove paper misfeeds and perform Open to make c
ページ11に含まれる内容の要旨
AR-5316-5320-EX.book 9 ページ ２０ ０５年 ４月８ 日 金 曜日 午前９ 時３５ 分 BEFORE USING THE MACHINE 18 19 20 25 24 1 23 22 21 29 30 26 27 28 17 Parallel connector 26 Roller rotating knob Connect to your computer to use the printer Turn to remove misfed paper. (p.49, p.50) function. (Software Setup Guide) 27 Fusing unit release levers 18 Document feeder tray (when the SPF is To remove a paper misfeed from the fusing unit, push installed) down on these levers and remove the paper. (p.50) Place the original(s) th
ページ12に含まれる内容の要旨
AR-5316-5320-EX.book 10 ページ ２０ ０５年 ４月８ 日 金 曜日 午前９ 時３５ 分 BEFORE USING THE MACHINE OPERATION PANEL 1 2 3 XY- ZOOM ON LINE DUAL PAGE COPY 1 ON LINE key / indicator 8 7 POWER SAVE indicator Press to toggle the machine between online and Lights up when the machine is in a power save mode. off-line. The indicator lights up when the machine (p.12) is online, and goes off when the machine is 9 8 Display off-line. The indicator blinks while the machine is Shows the set number of copies, as well as
ページ13に含まれる内容の要旨
AR-5316-5320-EX.book 11 ページ ２０ ０５年 ４月８ 日 金 曜日 午前９ 時３５ 分 BEFORE USING THE MACHINE 6 7 8 9 10 11 12 4 5 AUDIT CLEAR POWER SAVE ZOOM 25 400% INTERRUPT CLEAR ORIGINAL PAPER 200% AUTO SIZE SIZE 141 TEXT 11X17 129 PHOTO 8½X14 121 8½X11 CLEAR ALL 100% 8½X5½ 95 8½X11 1 77 EXTRA 64 135 50% START ORIGINAL SIZE TRAY AUTO PRESET RATIO ENTER SELECT IMAGE 13 14 15 16 17 18 19 20 21 23 24 25 26 22 Not used for this machine. 15 16 23 22 PAPER SIZE indicators Numeric keys Light up to show the selected copy
ページ14に含まれる内容の要旨
AR-5316-5320-EX.book 12 ページ ２０ ０５年 ４月８ 日 金 曜日 午前９ 時３５ 分 POWER ON AND OFF The power switch is located on the left side of the machine. POWER ON POWER OFF Make sure that the machine is not in Turn the power switch to the "ON" operation and then turn the power switch position. to the "OFF" position. It will take about 45 If the power switch is seconds for the machine turned off while the to warm up. While the machine is in operation, machine is warming up, a misfeed may occur and the
ページ15に含まれる内容の要旨
AR-5316-5320-EX.book 13 ページ ２０ ０５年 ４月８ 日 金 曜日 午前９ 時３５ 分 LOADING PAPER The paper required indicator ( ) will light up when there is no copy paper in the selected paper feed tray, or when the selected paper tray is not installed or is improperly installed. PAPER For best results, use only SHARP recommended paper. Paper tray type Paper type Size Weight Capacity 1 Paper tray Standard paper 5-1/2" x 8-1/2" (Invoice) 15 lbs. to 24 lbs. * 250 sheets 2 2 1 Recycled paper 8-1/2" x 11" (Letter) (56
ページ16に含まれる内容の要旨
AR-5316-5320-EX.book 14 ページ ２０ ０５年 ４月８ 日 金 曜日 午前９ 時３５ 分 BEFORE USING THE MACHINE LOADING PAPER Make sure that the machine is not copying or printing, and then follow these steps to load paper. Loading the paper tray Gently lift and pull out the paper tray Gently push the paper tray into the 1 5 until it stops. machine. 15 If you loaded a different size of paper than Push the pressure plate down until it 2 Note was loaded previously in the tray, go to locks in place. "CHANGING A TRAY’S PAP
ページ17に含まれる内容の要旨
AR-5316-5320-EX.book 15 ページ ２０ ０５年 ４月８ 日 金 曜日 午前９ 時３５ 分 BEFORE USING THE MACHINE Loading the bypass tray Unfold the bypass tray. Insert the paper (print face down) all 1 3 the way into the bypass tray. To prevent a misfeed, verify once more that the paper guides are adjusted to the width of the paper. When feeding large 1 If you loaded paper in the bypass tray, press paper such as 8-1/2" x Note the [TRAY SELECT] key ( ) to select the 14" and 11" x 17", pull bypass tray. The bypass t
ページ18に含まれる内容の要旨
AR-5316-5320-EX.book 16 ページ ２０ ０５年 ４月８ 日 金 曜日 午前９ 時３５ 分 BEFORE USING THE MACHINE Envelopes Do not use the following envelopes, as misfeeds will occur. Envelopes with metal tabs, clasps, strings, holes, or windows. Envelopes with rough fibers, carbon paper, or glossy surfaces. Envelopes with two or more flaps. Envelopes with tape, film, or paper attached to the flap. Envelopes with a fold in the flap. Envelopes with glue on the flap to be moistened for sealing. Envelopes with lab
ページ19に含まれる内容の要旨
AR-5316-5320-EX.book 17 ページ ２０ ０５年 ４月８ 日 金 曜日 午前９ 時３５ 分 BEFORE USING THE MACHINE Press the [START] key ( ) and then 4 the [PAPER SIZE ENTER] key. To change the paper size START setting of another tray, repeat steps 2 to 5 after pressing the [START] key ( ). Affix the paper size label for the paper size Note selected in step 3 to the label position on the 1 right end of the tray. Important points when using the printer mode Make sure that the tray's paper size setting is the same as
ページ20に含まれる内容の要旨
AR-5316-5320-EX.book 18 ページ ２０ ０５年 ４月８ 日 金 曜日 午前９ 時３５ 分 Chapter 2 COPY FUNCTIONS 2 This chapter explains basic copying functions such as normal copying, reduction or enlargement, and exposure adjustment. NORMAL COPYING This section explains how to make a regular copy. If "Auditing mode" has been enabled (p.39), enter your 3-digit account number. Copying from the document glass Open the document cover/SPF, and Press the [ORIGINAL SIZE ENTER] 1 3 place the original. key and select the original
