ページ1に含まれる内容の要旨
CZ19T31
cTOSHIBA CORPORATION, 1999
1
Reference Selection Advanced Operation Basic Operation Preparation Set up
ページ2に含まれる内容の要旨
Dear Customer Customer’s Record Congratulations! You have purchased one of the finest You will find the model number and serial number on the Color TV’s on the market! back of your TV set. This manual will help you use the many exciting and Record these numbers in the spaces provided below. useful features to make your TV viewing more enjoyable Refer to them whenever you call upon your TOSHIBA than ever before. dealer regarding this product. Before operating your TV set, please read all these sa
ページ3に含まれる内容の要旨
Table of Contents Set Up Installing Your TV ....................................... 3 Adjusting the Picture.................................. 18 Connecting Your TV.................................... 4 Adjusting the Sound ................................... 19 Preparation Selecting Stereo or Surround Stereo Sound ..... 20 Preparing the Remote Control for Use......... 5 Advanced Operation Location of Controls .................................... 6 Programming Your Favorite Channels ...... 22 Usin
ページ4に含まれる内容の要旨
Connecting Your TV If you’re only going to connect the TV to your home antenna or Cable box, use the “Connection A”. If you’re going to connect the TV to a VCR, video disc player or other equipment, use the “Connection B”. Caution: Do not plug the TV in until you have finished connecting all of your equipment. Connection A: To connect an antenna or Cable box Back of TV VHF and/or UHF F-type connector antenna (Not supplied) 75-ohm coaxial cable OR Cable lead-in IN OUT * Place your TV on channel 3
ページ5に含まれる内容の要旨
Preparing the Remote Control for Use With the Remote Control, you can operate your TV, most VCR models and cable TV converters together, even if they are different brands. If you will be using your TV with a Toshiba VCR, your Remote Control is already programmed and ready to use. If you own different brands of VCRs and/or converters, you first have to program your Remote Control. (See “Programming the Remote Control” on page 8.) Installing the Remote Control batteries 1 Slide the battery cover o
ページ6に含まれる内容の要旨
Location of Controls Only the buttons that are used to operate the TV set are described here. For details on the use of each control, refer to pages in brackets. TV front TV/VIDEO [15] VOLUME T/S [12] CHANNEL s/t [15] MENU TV/VIDEO VOLUME CHANNEL POWER TS t s POWER [12] MENU [11] T/S/t/s [11] Remote sensor POWER indicator Remote Control MUTE [16] POWER RECALL MUTE RECALL [16] o POWER [12] 1 2 3 4 5 6 Channel Number [15] 7 8 9 CH RTN 100 0 ENT CH RTN [16] MENU [11] CH MENU/ CHANNEL s/t [15] VOL V
ページ7に含まれる内容の要旨
Using the Remote with VCR or Cable TV Converter To control a TOSHIBA VCR, first set the TV/CABLE/VCR switch to “VCR” position. The buttons shown below will then control the VCR. The rest of the buttons operate the TV as usual. If you have another brand of VCR, you can probably program your Remote to control it. Details are on page 8. To control a cable TV converter, this Remote Control must be programmed to recognize the brand of your converter. See page 8. The shaded buttons can be used to
ページ8に含まれる内容の要旨
Programming the Remote Control This Remote Control is preprogrammed to operate TOSHIBA VCR’s. To use VCR’s other than TOSHIBA models (or cable converter), perform the following procedures before operating. To control other brands of VCR’s and cable TV converters 1 Refer to the “VCR code table” (or “Cable TV converter code RECALL table”) on pages 9 and 10 to find the code number that corresponds to the POWER RECALL MUTE brand name of your VCR (or converter). o If more than one number is liste
ページ9に含まれる内容の要旨
In some rare cases, you may not be able to operate your non-Toshiba equipment with the supplied Remote Control. This is because your equipment may use a code that is not provided with this Remote Control. In this case, please use the equipment’s own remote control. VCR code table BRAND NAME CODE NUMBER BRAND NAME CODE NUMBER BRAND NAME CODE NUMBER Adventura ............... 019 Jensen ..................... 060 Radio Shack ............ 019,056,344 Aiko ........................ 297 JVC ..........
ページ10に含まれる内容の要旨
Programming the Remote Control (Continued) Cable TV converter code table BRAND NAME CODE NUMBER BRAND NAME CODE NUMBER ABC ........................ 020,022,026,027, Regency .................. 021 030,032,033,036, Rembrandt .............. 030,089 066 Runco ...................... 019 Antronix .................. 041 Samsung ................. 059,163 Archer ..................... 041,058,172 Scientific Atlanta .... 025,027,036,296 Belcor ..................... 075 Signal ...................... 034,059
ページ11に含まれる内容の要旨
Menu Function (General Instructions) We suggest you familiarize yourself with the procedure before using the Menu function. To adjust any TV feature, the use of the Menu function is required. The adjustments that can be made to the TV appear on the screen. MENU TV/VIDEO VOLUME CHANNEL POWER MENU button (on TV and on Remote) Each time you press MENU, the Picture, Audio, Setup or Option menu on- TS t s screen display is selected in order, then press t or s. Picture menu Audio menu MENU T/S t/s CON
ページ12に含まれる内容の要旨
First-Time Operation Turning the TV set on 1 Set the TV/CABLE/VCR switch on the VOLUME T/S Remote Control to “TV” position. 2 Press POWER to turn on the TV. MENU TV/VIDEO VOLUME CHANNEL POWER To turn off the TV, press POWER again. TS t s T/S t/s TV 4 POWER MENU 3 Press VOLUME T/S to adjust the volume. To increase the volume, press S. To decrease the volume, press T . POWER RECALL MUTE VOLUME o + POWER – PUSH VOL 1 3 2 4 5 6 Selecting the on-screen display language 8 9 7 1 Press MENU until the Op
ページ13に含まれる内容の要旨
Programming Channel Memory The channel memory is the list of TV channel numbers your TV will stop on when you press the CHANNEL or button. First, use the TV/CABLE and CH PROGRAM functions to preset all active channels in your area. If necessary, arrange the preset channels with the ADD/ERASE functions so that you can tune into only desired channels. TV/CABLE function CHANNEL t/s 1 Press MENU until the Setup menu is displayed on the screen. TIMER: 0 MIN TV/CABLE: [TV]CABLE CH PROGRAM ADD/ERAS
ページ14に含まれる内容の要旨
Programming Channel Memory (Continued) ADD/ERASE function CHANNEL t/s After performing the CH PROGRAM function, you can add or erase specific MENU TV/VIDEO VOLUME CHANNEL POWER channels. 1 Select the channel you want to erase using the CHANNEL s or t TS t s button, or select the channel you want to add using the Channel Number buttons. 2 Press MENU until the Setup menu is MENU T/S t/s displayed on the screen. TIMER: 0 MIN TV/CABLE: [TV]CABLE CH PROGRAM ADD/ERASE: [ADD]ERASE 3 Press s or t until
ページ15に含まれる内容の要旨
Watching TV Programs or Video input CHANNEL t/s Selecting the TV channels Select a channel in one of the following two ways. To scan the memorized channels in numerical sequence MENU TV/VIDEO VOLUME CHANNEL POWER Press CHANNEL s to select the next higher channel. Press CHANNEL t to select the next lower channel. TS t s Press the button again to select the next memorized channels. To select a channel directly T/S t/s Press the Channel Number buttons (0-9 and 100). To select channel 4, press “
ページ16に含まれる内容の要旨
Convenient Remote Functions Displaying on-screen information Press RECALL to display the following on- RECALL STEREO TV-PG screen information. POWER L V RECALL MUTE CAPTION o Channel number or VIDEO mode selected TEXT MUTE Stereo audio status 3 1 2 V-CHIP rating CABLE 4 Channel 4 5 6 Number 7 8 9 CH RTN Muting the sound 100 0 ENT CH RTN Press MUTE to mute the sound. The word “MUTE” will be displayed on the screen as CH shown. This is useful during telephone calls or other interruptions.
ページ17に含まれる内容の要旨
Setting the Off-T imer (Sleep T imer) With the off-timer, you can set the TV to turn off automatically after a pre-determined period of time (up to 180 minutes in 10 minute units). To set the off-timer MENU TV/VIDEO VOLUME CHANNEL POWER 1 Press MENU until the Setup menu is TS t s displayed on the screen. TIMER: 0 MIN TV/CABLE: [TV]CABLE CH PROGRAM ADD/ERASE: [ADD]ERASE V-CHIP CONTROL FAVORITE CH POWER MOVE[s t] SELECT[T S] MENU T/S t/s 2 Press s or t until “TIMER” is displayed in TIMER: 0 MIN pu
ページ18に含まれる内容の要旨
Adjusting the Picture You can adjust the picture quality (CONTRAST, BRIGHTNESS, SHARPNESS, COLOR and TINT) to suit your taste. Adjusting the picture quality MENU TV/VIDEO VOLUME CHANNEL POWER 1 Press MENU repeatedly until the Picture CONTRAST – + menu is displayed on the screen. BRIGHTNESS– + TS t s SHARPNESS – + COLOR – + 2 Press s or t until the item you want to TINT – + RESET adjust is displayed in purple. MOVE[s t] ADJUST[T S] MENU T/S t/s 3 Press T or S to adjust the level. CONTRAST – + BRI
ページ19に含まれる内容の要旨
Adjusting the Sound You can adjust the sound quality (BASS, TREBLE and BALANCE) to suit your taste. Adjusting the sound quality MENU TV/VIDEO VOLUME CHANNEL POWER 1 Press MENU until the Audio menu is displayed on the screen. MTS: [STR] MONO BASS – + TS t s TREBLE – + BALANCE – + 2 Press s or t until the item you want to SURROUND: [ON]OFF adjust is displayed in purple. MOVE[s t] SELECT[T S] MENU T/S t/s 3 Press T or S to adjust the level. MTS: [STR] MONO BASS – + Example: BASS adjustment mode dis
ページ20に含まれる内容の要旨
Selecting Stereo or Surround Stereo Sound The MTS (Multi-channel TV Sound) feature allows you to improve your TV viewing with high fidelity stereo sound. This TV also allows you to activate or deactivate the stereo surround sound effect. Listening to stereo sound MENU TV/VIDEO VOLUME CHANNEL POWER 1 When the TV receives a stereo broadcast, STEREO the word “STEREO” is displayed on the SAP TS t s screen whenever the TV is turned on, a channel is selected, or the RECALL button is pressed. TV 4 t/s
