ページ1に含まれる内容の要旨
Us er
m anu al
Us er
m anu al
Us er
m anu al
14 M G 10 U
ページ2に含まれる内容の要旨
Mains connection and remote batteries Mains connection The TV is suitable for use on a.c. mains supply, 220-240V, 50 Hz only. It must not be connected to d. c. mains. The mains lead of the TV is fitted with a moulded plug. If the mains sockets are not compatible or if for any reason the plug is removed please follow these directions: The moulded plug cannot be rewired and if removed must be disposed of safely. DO NOT under any circumstances plug the severed plug into any mains socket as this cou
ページ3に含まれる内容の要旨
Connections 220 - 240V ~ 50Hz 2
ページ4に含まれる内容の要旨
1. Aerial Socket Enables connection of the aerial and, if required, a video recorder (see manual for latter). To tune the channel reserved for your video recorder, start up the recorder then carry out MANUAL CHANNEL SETTING operations. Store at any programme ending with a 9 (9,19,29, etc.) Each time you use the video recorder, switch to the channel assigned to it. 2. SCART Socket This is used to connect: – a VHS, 8 MM, S–VHS or Hi–8 video recorder or camcorder, – a PAY TV decoder, – a video game
ページ5に含まれる内容の要旨
Remote Control Stand-by Display programme No. and sleep timer (Yellow button) Inactive Display Timer Menu (Green button) Inactive Call up personal adjustments (Red button) Adjustment: move to Right/Left in menus and select one of the proposed options Confirm anactionor validate a menu option To go to Picture and Channel Adjustment menus To leaveamenu Move Up and Down in the menus Volume level To change programme Sound mute 8 To switch to connected Direct access to equipment (e.g.: video recorder
ページ6に含まれる内容の要旨
Automatic Channel Setting This set is equipped with an automatic search system which will search for and store all channels available in your region. To help identify the programmes, we suggest that you have to hand a TV guide or daily newspaper. Ensure that the aerial lead is connected to the TV set. Check that any equipment connected only via the aerial (video recorder or satellite equipment) is operating. Switch off any equipment connected via the SCART socket. Installation Press the ON/OFF b
ページ7に含まれる内容の要旨
Changing a Programme Number Select the channel number to be changed using the button. AUTO INSTALL. Using the numerical keypad on the remote control, enter the UK VL new programme number. PR01 You can also use the buttons on the remote control. Press the button to confirm the change. The programmes stored under the old and new numbers are then swapped. Repeat this operation to change other programme numbers. Erasing a Programme Select the programme to be erased using the button. Enter 0 or 00 on
ページ8に含まれる内容の要旨
Manual Channel Setting Press the button twice to call up the channel setting menu. 1. Channel Search Select the 2nd line of the menu using the button. Start the search by pressing: – the button for a forward search, UK – the button for a backward search. VL The search fully covers the VL, VH and U bands starting PR from the channel on the screen. The cursor moves and as soon as a channel is found, the picture appears on the screen. Wait for the menu to go to the bottom of the screen for optimum
ページ9に含まれる内容の要旨
3. Fine Tuning Only necessary in the event of interference If fine tuning is necessary, select the 3rd line of the menu using the button. UK VL If necessary, adjust the picture using the buttons. PR Select the 4th line (PR)using the button to allocate a programme number to the channel and store it in memory (see Programme Number and Storing in Memory) If a channel has required fine tuning, it will be stored in memory with the AFC (Automatic Frequency Control) deactivated. Press the button to lea
ページ10に含まれる内容の要旨
Picture Adjustments Press the button to call up the Picture Menu. = = = = = BRIGHTNESS COLOUR CONTRAST SHARPNESS TINT Select the function to be adjusted using the buttons. The tint function is only active in NTSC mode. Adjust as required using the buttons. Storing Personal Adjustments You can store the adjustments you have just made and call them up at a later stage. Caution: these personal adjustments will replace and delete the standard settings made at the factory. With the Picture Menu displ
ページ11に含まれる内容の要旨
Day to Day Operation Switching On - Selecting Programmes Switch on the television set using the main ON/OFF switch if the indicator is off. If it is on, enter the desired programme number. For programmes 1 to 9: Press the corresponding number on the remote control. For programmes 10 to 99 (e.g. 24) : Press and hold the decimal (tens) number (2):2- then press the units (4) number briefly:24 Volume Adjustment - Sound Mute Press the buttons to turn the sound up or down. Press the button to turn the
ページ12に含まれる内容の要旨
SAFE USE OF EQUIPMENT This equipment has been designed and Don’t use makeshift stands and NEVER fix legs with manufactured to meet international safety wood screws-to ensure complete safety always fit standards but, like any electrical equipment, care the manufacturer’s approved stand or legs, with the must be taken if you are to obtain the best results fixings provided, according to the instructions. and safety is to be assured. Don’t allow electrical equipment to be exposed to Do read the Oper
ページ13に含まれる内容の要旨
PERITELEVISON (SCART) PIN CONNECTIONS VIDEO INPUTS SIGNAL SELECTION Composite video or sync: Pin 20 (pin 17 return). Facilities are provided for automatic switching when the equipment connected provides switching volta- RGB: ges as follows: Red Pin 15 (pin 13 return). Pin8:+9.5V to+12V Green Pin 11 (pin 9 return). Auto switching to auxiliary O/AUX channel. Blue Pin 7 (pin 5 return). Pin 16: + 1 V. to + 3 V. Auto switching to RGB. VIDEO OUTPUT SIGNAL LEVEL Composite video: Pin 19 (pin 17 return).
ページ14に含まれる内容の要旨
THO MSON mu lt im e d i a Sales UK Limited Crown road Enfield Middlesex EN 1 1DZ 253 256 00 -2 -
