ページ1に含まれる内容の要旨
ST54T6
ST62T6
PROJECTION TELEVISION
.............
Owner’s
Instructions
BP68-01744A-00(ENG)
............................................................................................................................
ページ2に含まれる内容の要旨
Warning! Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product
ページ3に含まれる内容の要旨
Thank You for Choosing Samsung Thank you for choosing Samsung! Your new Samsung Projection TV represents the latest in television technology. We designed it with easy-to-use on-screen menus and closed captioning capabilities, making it one of the best products in its class. We are proud to offer you a product that will provide convenient, dependable service and enjoyment for years to come. Important Safety Information Always be careful when using your TV receiver. To reduce the risk of fire, e
ページ4に含まれる内容の要旨
• Protect the power cord. Power supply cords should be routed so that they won’t be walked on or pinched by objects placed on or against them. Pay particular attention to cords at plugs, con- venience receptacles, and the point where they exit from the unit. • Unplug the TV from the wall outlet and disconnect the antenna or cable system during a light- ning storm or when left unattended and unused for long periods of time. This will prevent dam- age to the unit due to lightning and power-line su
ページ5に含まれる内容の要旨
Important Warranty Information Regarding Television Format Viewing Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format full-motion video. The images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving. Displaying stationary graphics and images on screen, such as the dark top and bottom letterbox bars (wide screen pictures), should be limited to no more than 15% of the tota
ページ6に含まれる内容の要旨
CONTENTS Chapter 1: Your New TV . . . . . . . . . . . . . . .1.1 List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.1 Familiarizing Yourself with Your New TV . . . . . . . . . . . . . . . . . . . . . .1.2 Front Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.2 Front Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.3 Rear Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ7に含まれる内容の要旨
CONTENTS Chapter 3: Operation (Cont.) . . . . . . . . . .3.13 Labeling the Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.13 Picture Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.14 Customizing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . .3.14 Using Automatic Picture Settings . . . . . . . . . . . . . . . . . . . .3.15 Sound Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ8に含まれる内容の要旨
Chapter One YOUR NEW TV List of Features Your Samsung TV was designed with the latest technology. This TV is a high-performance unit that includes the following special features: • Easy-to-use remote control • Easy-to-use on-screen menu system • Automatic timer to turn the TV on and off • Adjustable picture and sound settings that can be stored in the TV’s memory • Automatic channel tuning for up to 181 channels • A special filter to reduce or eliminate reception problems • Fine tuning control
ページ9に含まれる内容の要旨
YOUR NEW TV Familiarizing Yourself with The TV Front Panel Buttons The buttons on the front panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. Œ TV/VIDEO Ø Remote Control Sensor All the inputs connected to the external compo- Aim the remote control towards this spot on the TV. nent jacks will be shown in regular sequence. ∏ POWER ´ MENU Press to turn the TV on and off. Press to see an on-screen menu of your TV
ページ10に含まれる内容の要旨
YOUR NEW TV Front Panel Jacks You can use the front panel jacks to connect an A/V component that is used only occasionally, such as a camcorder or video game. (For information on connecting equipment, see pages 2.1 – 2.8.) Œ PERFECT FOCUS ˇ AUDIO INPUT jacks Press to adjust for the optimum picture set in the Use to connect the audio signals from a cam- Factory. corder or video game. ´ VIDEO INPUT jack ¨ S-VIDEO INPUT jack Use to connect a video signal from a camcorder Use to connect an S-Video
ページ11に含まれる内容の要旨
YOUR NEW TV Rear Panel Jacks Use the rear panel jacks to connect an A/V component that will be connected continu- ously, such as a VCR or a DVD player. Because there are two sets of input jacks, you can connect two different A/V components (i.e., a VCR and a DVD, 2 VCRs, etc.) For more information on connecting equipment, see pages 2.1 – 2.7. Œ ANTENNA terminals ¨ AUDIO INPUT jacks Connect to an antenna or to a cable TV system. Connect to the audio output jacks of VCRs, DVD players and similar
ページ12に含まれる内容の要旨
YOUR NEW TV Remote Control You can use the remote control up to about 23 feet from the TV. When using the remote, always point it directly at the TV. You can also use your remote control to operate your VCR and cable box. See page 4.15 for details. Œ Power Ú PIP Controls Turns the TV on and off. PIP ON Activates picture in picture. ´ TV Scan Press to use your remote control Press to memorize (scan) the to operate your TV. available channels. VCR Swap Press to use your remote control Exchanges th
ページ13に含まれる内容の要旨
2 Chapter Two INSTALLATION Connecting VHF and UHF Antennas If your antenna has a set of leads that look like this, see “Antennas with 300-ohm Flat Twin Leads,” below. If your antenna has one lead that looks like this, see “Antennas with 75-ohm Round Leads,” on page 2.2. If you have two antennas, see “Separate VHF and UHF Antennas,” on page 2.2. Antennas with 300-ohm Flat Twin Leads If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300- ohm twin flat lea
ページ14に含まれる内容の要旨
INSTALLATION Antennas with 75-ohm Round Leads Plug the antenna lead into the ANT IN terminal on the rear panel. Separate VHF and UHF Antennas If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires a an optional combiner-adaptor (available at most electronics shops). 1 Connect both antenna leads to the combiner. 2 Plug the combiner into the ANT IN terminal on the rear panel. Co
ページ15に含まれる内容の要旨
INSTALLATION Cable with a Cable box that Descrambles All Channels 1 Find the cable that is connected to the ANTENNA OUT terminal on your cable box. This terminal might be labeled “ANT OUT”, “VHF OUT”, or simply, “OUT”. 2 Connect the other end of this cable to the ANT IN terminal on the rear of the TV. Connecting to a Cable Box that Descrambles Some Channels If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter
ページ16に含まれる内容の要旨
INSTALLATION 4 Connect a coaxial cable between the ANTENNA OUT terminal on the cable box and the B–IN terminal on the A/B switch. 5 Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch. 6 Connect the last coaxial cable between the OUT terminal on the RF (A/B) switch and the ANT IN terminal on the rear of the TV. After you’ve made this connection, set the A/B switch to the “A” position for normal view- ing. Set the A/B switch to the “B
ページ17に含まれる内容の要旨
INSTALLATION Connecting a VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 2.1-2.3). Skip step 1 if you have not yet connected to an antenna or a cable system. 1 Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV. A coaxial cable is usually included with a VCR. (If not, check your local electronics store). 2 Connect a set of audio cables between the
ページ18に含まれる内容の要旨
INSTALLATION Connecting a Second VCR to Record from the TV Your TV can send out signals of its picture and sound to be recorded by a second VCR. To do this, connect your second VCR as follows: 1 Connect a set of audio cables between the AUDIO OUT jacks on the TV and the AUDIO IN jacks on the VCR. (The VCR input jacks might be either on the front or rear of the VCR.) 2 Connect a video cable between the VIDEO OUT jack on the TV and the VIDEO IN jack on the VCR. Refer to your VCR’s instructions for
ページ19に含まれる内容の要旨
INSTALLATION Connecting a DVD Player(480i) The rear panel jacks on your TV make it easy to connect a DVD player to your TV. Connecting to Y, PB, PR 1 Connect a set of audio cables between the DVD audio in jacks on the TV and the AUDIO OUT jacks on the DVD player. 2 To enable Component video viewing, connect video cables between the Y, PB, and PR inputs on the TV and Y, PB, and PR (or Y, CB, CR) outputs on the DVD player. Note: For an explanation of Component video, see your DVD player’s owner’
ページ20に含まれる内容の要旨
INSTALLATION Installing Batteries in the Remote Control 1 Slide the back cover all the way out to open the battery compartment of the remote control. Make sure to match the “+” and 2 “–” ends of the batteries with the Install two AA size diagram inside the compartment. batteries. Remove the batteries and store 3 them in a cool, dry place if you won’t Replace the cover. be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typic
