ページ1に含まれる内容の要旨
COLOUR
TELEVISION
SP42W4/42W5
SP43J9/43T6/43T7/43T8/43W6
SP47Q7/47W1/47W3
SP48T6
SP52Q7
SP54J9/54T6/54T7/54T8
SP55W3/55W9
SP62J9/62T6/62T8
SP65W3
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PICTURE IN PICTURE
TELETEXT
ページ2に含まれる内容の要旨
Important Warranty Information Regarding Television Format Viewing ENG Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format full-motion video. The images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving. Displaying stationary graphics and images on screen, such as the dark top and bottom letterbox bars (wide screen pictures), should be limited to no more than 15% of the
ページ3に含まれる内容の要旨
Safety Instructions ENG Do not expose the television to extreme temperature conditions or to extreme humidity conditions. Do not expose the television to direct sunlight and other sources of heat. Do not expose the television to any liquids. Never put objects of any kind into the television, and do not place a water-containing vessel on the television. During a storm conditions (especially when there is lightning) unplug the television from the mains socket and aerial. Do not step on
ページ4に含まれる内容の要旨
ENG Contents (continued) FOREWORD Important Warranty Information Regarding Television Format Viewing........ 2 Safety Instructions......................................................................................... 3 Caution .......................................................................................................... 3 CONNECTING AND PREPARING YOUR TELEVISION Control Panels..............................................................................................
ページ5に含まれる内容の要旨
ENG Contents USING YOUR TELEVISION Changing the Sound Standard ...................................................................... 28 Adjusting the Sound Settings ........................................................................ 29 Setting the Dolby Pro Logic (depending on the model)................................. 30 Extra Sound Settings..................................................................................... 31 - AUTO VOLUME - MELODY - VIRTUAL DOLBY Selecting
ページ6に含まれる内容の要旨
Control Panels (depending on the model) The actual configuration on your television may be different, ➢ ENG depending on your model. ( a ) Input Source Selection ( f ) Volume Increase ( b ) Menu Display ( g ) Temporary Sound Switch Off ( c ) Previous Channel ( h ) Remote Control Sensor ( d ) Next Channel ( i ) Power On/Off ( e ) Volume Decrease ( j ) Standby & Timer Indicator 6
ページ7に含まれる内容の要旨
Control Panels (depending on the model) The actual configuration on your television may be different, ➢ ENG depending on your model. ( a ) Input Source Selection ( f ) Volume Increase ( b ) Menu Display ( g ) Temporary Sound Switch Off ( c ) Previous Channel ( h ) Remote Control Sensor ( d ) Next Channel ( i ) Power On/Off ( e ) Volume Decrease ( j ) Standby & Timer Indicator 7
ページ8に含まれる内容の要旨
Using a Display Deck (depending on the model) ENG You can display a VCR or DVD Player, etc. by using the display deck. SP47W3/55W3/65W3 SP47W3/55W3/65W3 1 Press the symbol “ ” at the center of the display deck. 2 Hold the center of the door and lift it up in the direction of arrow till a ‘ttok’ sound sounds. 3 After placing a component you have in the display deck, hold the center of the door and pull it down. 4 Shut the door by pressing the symbol “”. SP54T8/55W9/62T8 SP54T8/55W9/62T8 1 Hold th
ページ9に含まれる内容の要旨
Connection Panels (depending on the model) The actual configuration on your TV may be different, depending on ➢ ENG your model. Front of the TV Side of the TV a Video Input S-Video Input Perfect Focus Audio Inputs Center Speaker Connectors (Option) Rear of the TV Rear Speaker Connectors 75Ω Coaxial Connector for Aerial or Cable Network Audio/Video Monitor Outputs S-Video Input Audio Outputs RCA Audio/Video Inputs SCART Audio/Video Input/Output DVD Inputs 9
ページ10に含まれる内容の要旨
Infrared Remote Control ENG Power TELEVISION STANDBY TV VCR Cable DVD SET MAKE THE REMOTE CONTROL REMOTE CONTROL SETUP WORKS FOR TV, VCR, CABLE, DVD PLAYER NUMERIC BUTTONS FOR DIRECT ACCESS (CHANNEL/TELETEXT PAGE) ONE, TWO, OR THREE-DIGIT TUNER/CABLE NETWORK SELECTION TV CHANNEL SELECTION (DEPENDING ON THE MODEL)/ FASTEXT TOPIC SELECTION TELETEXT STORE (OPTION) Surround S.STD P.STD S.Mode SURROUND ON/OFF DIRECTLY SOUND MODE SELECTION SOUND EFFECT SELECTION PICTURE EFFECT SELECTION NEXT CHANNEL/
ページ11に含まれる内容の要旨
Inserting the Batteries in the Remote Control ENG You must insert or replace the batteries in the remote control when you: Purchase the television Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol downwards and then pulling firmly to remove it. 2 Insert two R03, UM4, “AA” 1.5V or equivalent batteries taking care to respect the polarities: + on the battery against + on the remote control - on the batte
ページ12に含まれる内容の要旨
Switching Your Television On and Off ENG The mains lead is attached to the rear of your television. 1 Plug the mains lead into an appropriate socket. Power The main voltage is indicated on the rear of the television ➣ and the frequency is 50 or 60Hz. TV VCR Cable DVD SET 2 Press the POWER ( I ) button on the front of the television. Result: The Standby indicator on the front of the television lights up. 3 Press the Power ( ) button on the remote control to switch the television on. Result: The p
ページ13に含まれる内容の要旨
Becoming Familiar with the Remote Control ENG The remote control is used mainly to: Change channels and adjust the volume Set up the television using the on-screen menu system Power The following table presents the most frequently used buttons and their functions. TV VCR SET Cable DVD Button Viewing Function Menu Function Used to display the next stored channel. P Used to display the previous stored channel. to Used to display the corresponding channels. TV Surround S.STD P.STD S.Mode -/--/-
ページ14に含まれる内容の要旨
Plug and Play Feature ENG When the television is initially powered on, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock. PLUG & PLAY 1 If the television is in Standby mode, press the POWER ( ) button ANT. INPUT : CHECK on the remote control. Result: The message PLUG & PLAY is displayed. It flickers for SELECT EXIT a little while and then LANGUAGE menu is automatically displayed. 2 Select the appropriate language by pressing the
ページ15に含まれる内容の要旨
Plug and Play Feature ENG If you want to reset this feature... FUNCTION 1 Press the MENU button. LANGUAGE : ENGLISH TIME √ √ Result: The main menu is displayed. CONVERGENCE √ √ BLUE SCREEN : ON 2 Press the or button to select FUNCTION. PLUG & PLAY √ √ DEMONSTRATION √ √ Result: The options available in the FUNCTION group are displayed. SELECT ENTER EXIT 3 Press the button. 4 Press the or button to select PLUG & PLAY. Press the button. Result: This feature starts with the mes
ページ16に含まれる内容の要旨
Viewing the Demonstration ENG To become familiar with the various menus provided by your television, you can view the inbuilt demonstration. Menu Video 1 Press the MENU button. Result: The main menu is displayed. 2 Press the or button to select FUNCTION. Display P.Size Result: The options available in the FUNCTION group are displayed. 3 Press the button. FUNCTION LANGUAGE : ENGLISH 4 Press the or button to select DEMONSTRATION. Press the TIME √ √ button. CONVERGENCE √ √ BLUE SCREEN : ON
ページ17に含まれる内容の要旨
Adjusting Convergence ENG If the color appears spread out or “smeared” on the screen, the convergence probably needs alignment. Be sure to use the remote control for the convergence adjustments. (The Convergence FUNCTION Adjustment can not be made by using the control buttons on the LANGUAGE : ENGLISH front panel.) TIME √ √ CONVERGENCE √ √ BLUE SCREEN : ON 1 Press the MENU button. PLUG & PLAY √ √ Result: The main menu is displayed. DEMONSTRATION √ √ 2 Press the or button to select FUNCTION.
ページ18に含まれる内容の要旨
Storing Channels Automatically ENG You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired CHANNEL programme numbers. However you can sort numbers manually and AUTO STORE √ √ MANUAL STORE √ √ clear any channels you do not wish to watch. ADD/ERASE √ √ FINE TUNE √ √ SORT √ √ 1 Press the MENU button. Result: The main menu is displayed. SELECT ENTER EXIT 2 Press t
ページ19に含まれる内容の要旨
Sorting the Stored Channels ENG This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using auto store. You can delete the channels you do not want to keep. CHANNEL AUTO STORE √ √ MANUAL STORE √ √ ADD/ERASE √ √ 1 Press the MENU button. FINE TUNE √ √ Result: The main menu is displayed. SORT √ √ 2 Press the or button to select CHANNEL. SELECT ENTER EXIT Result: The options available in the CHANNEL group are displayed. 3
ページ20に含まれる内容の要旨
Storing Channels Manually ENG You can store the television channels, including those received via cable networks. CHANNEL When storing channels manually, you can choose: AUTO STORE √ √ MANUAL STORE √ √ Whether or not to store each of the channels found ADD/ERASE √ √ FINE TUNE √ √ The programme number of each stored channel which SORT √ √ you wish to identify SELECT ENTER EXIT 1 Press the MENU button. Result: The main menu is displayed. MANUAL STORE 2 Press the or button to s
