ページ1に含まれる内容の要旨
Colour television
29PT4323 29PT4323
29PT4323
34PT4323 34PT4323
34PT4323
Operating Instructions
1-4_34PT4323/E 1 05/05/03, 2:35 PM
ページ2に含まれる内容の要旨
TABLE OF CONTENTS Introduction Safety Information/Useful Tips .................................................................................................. 3 Before Calling Service ................................................................................................................. 4 Basic Installation/Functions Hooking Up Your TV (Basic Connection) ............................................................................... 5 Use/Care of remote Control ......................
ページ3に含まれる内容の要旨
SAFETY INFORMATION AND USEFUL TIPS Safety Information • Disconnect mains plug when : – the red light below the TV screen is flashing continuously. –a bright white line is displayed across the screen. – cleaning the TV screen. Never use abrasive cleaning agents. Use a slight damp chamois leather or soft cloth. – there is a lightning storm. – the set is left unattended for a prolonged period of time. • No naked flame sources, such as lighted candles, should be placed on top of the TV or in the vic
ページ4に含まれる内容の要旨
BEFORE CALLING SERVICE Below is a list of frequently occurred symptoms. Before you call for service, make these simple checks. Some of these symptoms can easily be rectified if you know what to do. Symptom What you should do Colour patch • Switch off the TV by the mains power button. Wait for 20 (uneveness) minutes before switching on again. • Check the TV is not placed too near speakers or magnetic objects. No power • Check the TV’s AC power cord is plugged into the mains socket. If there is st
ページ5に含まれる内容の要旨
HOOKING UP YOUR TV (BASIC CONNECTION) Antenna Connection • Connect the aerial plug to the antenna socket ¬¬¬¬¬ on the backcover. • Insert the mains plug into the wall socket. Mains Connection •For correct mains voltage, refer to type sticker at the rear of the TV set • Consult your dealer if mains supply is different. Note : This diagram is not representative of the actual plug and socket. Switching on the Set •Press the main power button to switch on/ off the TV. • If the set is on standby (ind
ページ6に含まれる内容の要旨
CONNECTING THE AUDIO/VIDEO SOCKETS (PLAYBACK) Monitor out AV1 in AV2 in AV sockets on VIDEO Y L/Mono the rear of TV S-VIDEO Pb AUDIO R Pr COMPONENT VIDEO INPUT OUT OUT OUT ANTENNA VIDEO L R AUDIO IN IN IN Back of VCR VCR (equipped with Video and Audio output sockets) You can view the playback of VCR tapes (Video Disc players, camcorders, etc.) by using the AUDIO and VIDEO INPUT sockets on the rear of the TV. – Connect the VIDEO and AUDIO IN sockets on the rear of the TV to the AUDIO and VIDEO
ページ7に含まれる内容の要旨
CONNECTING THE AUDIO/VIDEO SOCKETS (PLACKBACK) Monitor out AV1 in AV2 in VIDEO Y AV sockets on rear of TV L/Mono S-VIDEO Pb AUDIO R Pr COMPONENT VIDEO INPUT OUT OUT Back of DVD Pb Y Pr L AUDIO R DVD (Equipped with “Y”, “Pb” and “Pr” and Output sockets) You can view the playback of DVD discs by using the COMPONENT VIDEO INPUT sockets on the rear of the TV. – Connect the “Y”, “Pb” and the “Pr” INPUT sockets on the TV to the “Y”, “Pb” and “Pr” OUTPUT sockets on the DVD to view playback of DVD discs
ページ8に含まれる内容の要旨
CONNECTING THE AUDIO/VIDEO SOCKETS (RECORDING) Connection for recording from the TV channel AV sockets on Monitor out AV1 in AV2 in VIDEO the rear of TV Y L/Mono S-VIDEO Pb AUDIO R Pr COMPONENT VIDEO INPUT OUT OUT OUT ANTENNA VIDEO L R AUDIO IN IN IN VCR (equipped with Video and Audio input sockets) – Connect the corresponding INPUT sockets of the VCR to the MONITOR OUTPUT sockets on the rear of the TV. –To enhance the sound of your TV, connect the AUDIO L and R sockets to an external audio s
ページ9に含まれる内容の要旨
FUNCTIONS OF REMOTE CONTROL & Power button – Switch set off temporarily to standby mode. (The red light indicator lights up when the set & is on standby mode). –To switch on set from standby mode, press é Channel +/– , Digit (0 -9) or Power button. “ é Personal Zapping buttons ‘ As Personal Zapping buttons, you can surf up to ( 10 personal channels for each button. For detailed § description of functions, refer to section on è “Personal Zapping ”. ! “ Smiley button ç Allows to add and store your
ページ10に含まれる内容の要旨
FUNCTIONS OF REMOTE CONTROL 2 A/V Button Allows you to select the AV channels. 3 Frownie button Allows to delete stored personal preference channels in your Personal Preference list. For 2 detailed description of functions, refer to section on 3 “Personal Zapping ”. 4 4 Smart Picture Button Press the Smart Picture button repeatedly to 5 access 5 different types of picture settings and choose your desired setting. 6 5 444 44 7 Allows you to switch from Stereo to Mono sound 8 during stereo transmi
ページ11に含まれる内容の要旨
➩ FUNCTIONS OF TV CONTROLS 6 4 5 7 2 3 1 1 Mains Power button Switch mains power on or off. 2 Standby Light indicator Indicate red light when standby mode is activated. 3 Remote Sensor Acts as a sensor for activating the controls of the TV when remote control handset is aimed at it. 4 Volume button Adjust sound volume softer. A 5 Volume button Adjust sound volume louder. 6 Programme button Select channel in ascending order. 7 Programme button Select channel in descending orde
ページ12に含まれる内容の要旨
SELECTING THE MENU LANGUAGE Operating instructions generally explains the operation of the TV set using the buttons on the remote control unless otherwise stated. Please read the following instructions carefully and follow the steps as shown to familiarise yourself with the installations and all features available in your set. Note: When there is no signal input to the TV, you may encounter instability of the on screen display. In this instance, please use the v button on your remote control to
ページ13に含まれる内容の要旨
AUTOMATIC TUNING OF CHANNELS Automatic tuning of channels allows you to store each programme automatically. Step Press button Result on screen Enter main menu. Main o ✔ Picture π Brightness ■ Sound Colour ■ Features Contrast ■ Install Sharpness Colour Temp. More... œ Main o Press button repeatedly until ■ Picture Language ¸ ■ Sound Auto Store Install is selected. ■ Features Manual Store ✔ Install π Sort Channel Edit Name œ Install o Enter install menu. ˙ ✔ Language π English ■ Auto Store ■ Manua
ページ14に含まれる内容の要旨
MANUAL TUNING OF CHANNELS Manual tuning of channels allows you to select your preferred channel number for every available programme. Step Press button Result on screen Main o Enter main menu. ✔ Picture π Brightness ■ Sound Colour ■ Features Contrast ■ Install Sharpness Colour Temp. More... œ Main o Press button repeatedly until ■ Picture Language ¸ ■ Sound Auto Store Install is selected. ■ Features Manual Store ✔ Install π Channel Edit œ Install o ✔ Language π English Enter install menu. ■ Auto
ページ15に含まれる内容の要旨
MANUAL TC UNING HANNELS OF CHANNELS Step Press button Result on screen Start manual searching. Searching Manual Store o ˙ stops once a transmitting signal is ■ Colour System ■ Sound System found. Search 128 MHzπ ✔ ■ Channel ■ Fine Tune ■ Store œ ¸ Select Channel. Manual Store o ■ Colour System ■ Sound System Key in the channel number. 1 2 3 ■ Search 9 Channel 2 π 4 5 6 ✔ ■ Fine Tune 7 8 9 ■ Store œ 0 Press button repeatedly until 10 ¸ Manual Storeo Store is selected. ■ Colour System ■ Sound Syst
ページ16に含まれる内容の要旨
SELECTING THE COLOUR/SOUND SYSTEM This feature allows you to select your desired Colour and Sound system. If Auto is selected, the respective colour and sound system will be automatically selected according to the transmission system. Note : Select your desired colour and sound system manually if reception is poor at Auto mode. Step Press button Result on screen Repeat step 1 Colour System is selected. Manual Store o to step 5 as in Colour System Auto π ✔ “Manual T uning ■ Sound System ■ Searc
ページ17に含まれる内容の要旨
FINE TUNING OF CHANNELS This feature allows you to adjust picture reception in areas of weak reception. Step Press button Result on screen Enter main menu. Main o ✔ Picture π Brightness ■ Sound Color ■ Features Contrast ■ Install Sharpness Colour Temp. More... œ Main o ¸ Press button repeatedly until ■ Picture Language ■ Sound Auto Store Install is selected. ■ Features Manual Store ✔ Install π Channel edit œ Install o Enter install menu. ■ Language Colour System ˙ ■ Auto Store Sound System Man
ページ18に含まれる内容の要旨
EDITING OF CHANNELS This feature allows you to skip or edit channels which have bad or weak TV signal or channels that you do not watch often. Note : Once a channel is skipped, you cannot have access to it by the CH (Channel) + or – button. You can only have access to the channel by the Digit (0 -9) buttons. Step Press button Result on screen Enter main menu. Main o ■ Picture Language ■ Sound Auto Store ■ Features Manual Store Press button repeatedly until ✔ Install π Channel Edit ¸ Install is s
ページ19に含まれる内容の要旨
ADJUSTING THE TV PICTURE The picture menu allows you to make adjustments to the picture. Step Press button Result on screen Display the main menu on screen. Main o ✔ Picture π Brightness ■ Sound Colour ■ Features Contrast ■ Install Sharpness Colour Temp More... œ Picture o Enter Picture menu. ˙ ✔ Brightnessp❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘59π ❘ ■ Colour ■ Contrast Select item. ˚ ■ Sharpness ■ Colour Temp or ■ NR ¸ œ Picture o Adjust level or select desired ✔ Colour p❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘59π ❘ ˝ ■ Contra
ページ20に含まれる内容の要旨
ADJUSTING THE TV SOUND The sound menu allows you to make adjustments to the sound. Step Press button Result on screen Display the main menu on screen. Main o ✔ Picture π Brightness ■ Sound Colour ■ Features Contrast ■ Install Sharpness Colour Temp. More... œ Main o Select Sound menu. ¸ ■ Picture Treble Sound π Bass ✔ ■ Features Balance ■ Install AVL Incr. Surround Ultra Bass œ Enter Sound menu. ˙ Sound o ✔ Treble p❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘0π ❘ ■ Bass Select item. ˚ ■ Balance ■ AVL or ■ Incr. Surro
