ページ1に含まれる内容の要旨
Colour Television
34PT4822
Instructions for use
L9 2000 3139 125 28241
28241/cover 1 7/6/00, 3:08 PM
ページ2に含まれる内容の要旨
2 2 Preparation Installing the TV 10 cm 4 Place your TV set on a stable and strong base. 4 Leave at least a free space of 5 cm on both 5 cm 5 cm sides and 10 cm from the top for good ventilation of the TV set. 4 Do not place anything on the TV set which might damage it e.g. plants or heat sources. Connecting the aerial 4 Insert the aerial plug into the socket g at the back of the TV. Connecting the mains 4 Insert the mains plug into the wall socket and switch on. Refer to the specification at th
ページ3に含まれる内容の要旨
3 3 Useful Tips 4 Avoid heat and direct sunlight. 4 Avoid direct exposure to rain or water. 4 DO NOT leave your TV on standby for a prolonged period. 4 Switch off your TV if not in use. 5 This will allow the TV to be demagnetised, giving good picture. 4 Never repair the TV yourself – get a skilled personnel! 4 Clean the TV’s screen with a slightly damp soft cloth ONLY WHEN NECESSARY. Note : Do not use abrasive solvent as it can damage the screen’s coating. 28241/p2-9 3 7/6/00, 3:10 PM
ページ4に含まれる内容の要旨
4 Connecting peripheral equipment 4 Equipment such as VCR, Laser disc player, VCD etc. could be connected to the video and audio (AV) sockets at the back of the TV. Switch off the TV and equipment before making any connection. Connection for playback AV 2 AV 1 Monitor 1. Connect to AV sockets in in out You may choose to connect up AV1 in or VIDEO AV2 in or both. L 4 connect the corresponding sockets of the AUDIO S-VIDEO equipment to that of the TV. R 5 to view the playback, select the first A
ページ5に含まれる内容の要旨
…connecting peripheral equipment 5 5 Connection for recording AV 2 AV 1 Monitor in in out 1. From the TV channel you are VIDEO watching 4 connect the corresponding sockets of L the VCR to the sockets at MONITOR out. AUDIO S-VIDEO R Note: For mono equipment, connect to the VIDEO and L sockets only. VCR 2. From one VCR to another VCR AV 2 AV 1 Monitor in in out 4 connect the sockets of the VCR which VIDEO you wish to record from to the corresponding sockets at either AV1 in L AUDIO or AV2 in. S
ページ6に含まれる内容の要旨
The TV’s controls 6 6 2 1 3 Front control 4 3 6 A L K VIDEO in L K P L 5 AUDIO R n 4 7 Top control Side sockets 1. Mains power Switch on or off the TV. 2. Red light indicator When light is on, it indicates that the TV is on standby. Note :If no signal is detected by the TV after 10 minutes, it will switch to standby automatically. 3. Remote control sensor For the remote control to work, it must be activated within the operating range of this sensor. 4. Headphone socket For connecti
ページ7に含まれる内容の要旨
7 7 Using the remote control For the remote control to work effectively, it has to be operated within the recommended operating range to the remote control sensor on the TV. 45° 45° 10 m 2 AV OSD SLEEP 12 3 4 5 6 7 8 9 SURF A/CH SAP 0 INC. MENU SURR. A CH H SMART SMART ± ` Press : Result : Standby Switch off TV and a red indicator 2 lights up. To switch on TV again, CH press either the 0 to 9 , , , AV CH 2 or key. 2 AV OSD SLEEP AV Select the AV channels . AV channel 12 3 selection 4 5 6 I
ページ8に含まれる内容の要旨
8 8 …using the remote control Press : Result : Channel Select a higher or lower channel selection number. CH Volume Adjust the volume of the TV set. adjustment 2 AV OSD SLEEP A 12 3 4 5 6 7 8 9 Menu Call up the main menu. If there is SURF MENU A/CH SAP an existing menu, pressing this 0 key will bring you back to the INC. MENU SURR. previous level menu. If you are in the 1st level menu, pressing this will exit the menu. CH A H SMART SMART ± ` INC. Incredible Switch on to enhance stereo SURR. Su
ページ9に含まれる内容の要旨
H H H H H 9 9 Menus 1st level 2nd level 3rd level BRIGHTNESS COLOUR CHANGE CODE CONTRAST CHANNEL SHARPNESS LOCK HUE CLEAR ALL COL TEMP CONTRAST PLUS NOISE REDUCE TIME 4:3 EXPAND TIMER ACTIVE CHANNEL 16:9 COMPRESS CHANNEL SKIP VOLUME AT BALANCE* TREBLE* BASS* FINE TUNE INCR SURROUND* LANGUAGE STORE ULTRA BASS* TUNER AVL AUTO INSTALL SLEEPTIMER SKIP CHILD LOCK MANUAL CLOCK EXTERNAL CC SURF Note* : You may not see these items on your BLUE MUTE INSTALLATION menu because it is applicable to certain m
ページ10に含まれる内容の要旨
➧ ➧ ➧ ➧ ➧ ➧ ➧ 10 10 Installing the TV In order to view the programmes broadcasted, you have to do some simple installation on the TV. Go into the INSTALLATION menu by using the keys on your remote control. Follow the steps below to enter INSTALLATION menu: & Call up 1st level é Press the key to “ Select INSTALLATION MENU menu with the highlight with the or key. INSTALLATION. key. SURF A/CH CLOCK B INSTALLATION B SURF A/CH BRIGHTNESS ❙ ❙ ❙ ❙ ❙ ❙ ❙ 31 LANGUAGE ENGLISH INSTALLA
ページ11に含まれる内容の要旨
➧ ➧ ➧ ➧ 11 11 … installing the tv - auto install Auto install Tune in channels automatically. Channels 1 to 125 are for cable transmission and channels 2 to 99 are for antenna transmission. & Enter INSTALLATION é Press the key to “ Select AUTO menu. highlight AUTO INSTALL with the INSTALL. or key. LANGUAGE ENGLISH TUNER ANTENNA AUTO INSTALL B LANGUAGE ENGLISH AUTO INST ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ 31 TUNER ANTENNA SKIP B MANUAL B AUTO INSTALL B The TV will automatically search and store
ページ12に含まれる内容の要旨
➧ ➧ ➧ ➧ ➧ ➧ ➧ ➧ 12 Fine tuning 12 To fine tune the frequency of a channel. & Select a channel é Enter INSTALLATION “ Press the key to which you wish to menu. highlight MANUAL. fine tune. 5 AUTO INSTALL B SKIP B LANGUAGE ENGLISH MANUAL B TUNER ANTENNA EXTERNAL B AUTO INSTALL B ‘ Select MANUAL with ( Press the or § Press the key to the or key. key to start fine highlight STORE. FINE TUNE is high- tuning until you get lighted. the best picture and sound. FIN
ページ13に含まれる内容の要旨
➧ ➧ ➧ ➧ ➧ ➧ ➧ 13 Skip channels 13 This menu enables you to skip channels which have bad reception or channels which you do not watched often. Once a channel is skipped, you can only call it up via the digit keys on the remote control. & Go into INSTALLATION é Press the key to “ Select SKIP with the menu highlight SKIP. or key. CHANNEL is high- lighted. TUNER ANTENNA AUTO INSTALL B LANGUAGE ENGLISH SKIP B CHANNEL 2 TUNER ANTENNA MANUAL B SKIP NO EXTERNAL B AUTO INSTALL B ‘ Enter a channel ( Pre
ページ14に含まれる内容の要旨
➧ ➧ ➧ ➧ ➧ ➧ ➧ 14 14 Naming of AV channels To name the AV channels according to a pre-set name list: AV, EXT, GAM, DVD, VCD, VCR or LD. & Go into INSTALLATION é Press the key to “ Select EXTERNAL menu highlight with the or EXTERNAL. key. EXT1 (the first AV channel) is high- lighted. SKIP B MANUAL B LANGUAGE ENGLISH EXTERNAL B EXT1 AV TUNER ANTENNA EXT2 LD AUTO INSTALL B ‘ Select a name in ( Press the key to § Select a name in the pre-set list for highlight EXT2 the pre-set list for EXT1. (the
ページ15に含まれる内容の要旨
15 15 Picture settings Personal settings You can do adjustment on BRIGHTNESS, COLOUR, CONTRAST, SHARPNESS, HUE, COLOUR TEMP and CONTRAST PLUS of a picture via the 1st level menu. This adjustment will automatically be stored in the PERSONAL mode of the SMART PICTURE feature and is applicable to all channels. How to do adjustment MENU & Call up 1st level menu with the key. é Press the or key to highlight the item that you wish to adjust. “ Select or adjust with the or key. OSD ‘ Exit with the
ページ16に含まれる内容の要旨
16 16 …picture settings – smart picture Other picture settings Noise reduction Switch this to ON to reduce the pixel size of your COL TEMP NORMAL picture. CONTRAST PLUS OFF NOISE REDUCE ON 4:3 EXPAND OFF 16:9 COMPRESS OFF 4:3 expand CONTRAST PLUS OFF In instances when you are watching movies which NOISE REDUCE ON has a black bar at the top and bottom, you can 4:3 EXPAND ON 16:9 COMPRESS OFF expand the picture vertically, by selecting ON. VOLUME ❙ ❙ ❙ ❙ ❙ ❙ ❙ 30 Note: You have to
ページ17に含まれる内容の要旨
17 17 Sound settings Personal settings You can do adjustment on TREBLE , BASS and INCREDIBLE SURROUND of a picture via the 1st level menu. These adjustment will automatically be stored in the PERSONAL mode of the SMART SOUND feature and is applicable to all channels. How to do adjustment MENU & Call up 1st level menu with the key. é Press the or key to highlight the item that you wish to adjust. “ Select or adjust with the or key. OSD ‘ Exit with the key. OSD VOLUME ❙ ❙ ❙ ❙
ページ18に含まれる内容の要旨
18 …sound settings – smart sound 18 Ultra Bass Switch this feature to ON to further enhance the BASS ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ 40 bass level of the sound output. INCR SURROUND ON ULTRA BASS ON AVL OFF SLEEPTIMER OFF AVL-Auto Volume Leveller INCR SURROUND ON This feature if switched on will automatically ULTRA BASS ON adjust any sudden changes in the TV’s volume to a AVL ON SLEEPTIMER OFF preset level. CHILD LOCK B Smart Sound These are some sound presets on the TV for your viewing pleasure.
ページ19に含まれる内容の要旨
19 19 BTSC stereo/Stereo BTSC Stereo (applicable to certain models only) If a TV programme is transmitted in BTSC stereo, you can switch to STEREO, MONO or SAP (second audio programme). Switch to mono SAP Press the key to select either STEREO, SAP or MONO. STEREO SAP MONO ➧ ➧ Stereo (applicable to certain models only) If a TV programme is transmitted in Stereo, you can switch to STEREO OR MONO. Switch to mono SAP Press the key to select either STEREO or MONO. STEREO MONO ➧ 28241/p15-19 19
ページ20に含まれる内容の要旨
➧ ➧ ➧➧ 20 20 Sleeptimer Sets timer (from 15 to 240 minutes) to switch TV to standby. To disable timer, set to “OFF”. To set timer & Call up 1st level é Press the key to “ Select time period MENU menu with the highlight with the or key. SLEEPTIMER. key. BLUE MUTE OFF ULTRA BASS OFF ULTRA BASS OFF INSTALLATION B AVL OFF AVL OFF BRIGHTNESS ❙ ❙ ❙ ❙ ❙ ❙ ❙ 31 SLEEPTIMER OFF SLEEPTIMER 15 COLOUR ❙ ❙ ❙ ❙ ❙ ❙ ❙ 31 CHILD LOCK B CHILD LOCK B CONTRAST ❙ ❙
