ページ1に含まれる内容の要旨
Introduction
Thank you for purchasing this television set.
This handbook has been designed to help you install and operate your TV set.
We would strongly recommend that you read it thoroughly.
We hope our technology meets entirely with your satisfaction.
Note: Specification and information subject to change without notice.
Table of Contents
Installation
Installing your television set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
The keys on the TV set . .
ページ2に含まれる内容の要旨
Installing your television set & Positioning the television set “ Remote control 5 cm 5 cm 5 cm Place your TV on a solid, stable surface, leaving Insert the two R6-type batteries (supplied) a space of at least 5 cm around the appliance. making sure that they are the right way round. To avoid accidents, do not put anything on the Check that the mode selector is set to TV. set such as a cloth or cover, a container full of The batteries supplied with this appliance do not liquid (vase) or a heat so
ページ3に含まれる内容の要旨
Safety Information • Plug the TV into a 220V – 240V AC, 50 Hz supply. • Disconnect mains plug when : – the red light below the TV screen is flashing continuously. – a bright white line is displayed across the screen. – there is a lightning storm. – the set is left unattended for a prolonged period of time. • Cleaning the TV screen. Never use abrasive cleaning agents. Use a slight damp chamois leather or soft cloth. • No naked flame sources, such as lighted candles, should be placed on top of the
ページ4に含まれる内容の要旨
Remote control keys & Radio / TV mode To switch the TV set to radio or TV mode (for versions equipped with radio). é Surround Sound (only available on certain versions). 1 11 To activate / deactivate the surround sound effect. In stereo, this gives the impression that the # speakers are further apart. For models equipped 2 with Virtual Dolby Surround*, you can experience Dolby Surround Pro Logic sound effects. In mono, a $ stereo spatial effect is simulated. 3 “ Screen information / permane
ページ5に含まれる内容の要旨
Quick installation When you turn on the TV set for the first & Use the îÏ keys on the remote control time, a menu is displayed on screen.This menu to select your country and validate with ¬. prompts you to select the country and If your country does not appear in the list, select language for the menus : choice “. . .” é Next select your language using the îÏ WELCOME keys and validate with ¬. Country Language “ The search starts automatically. Finally the INSTALLATION menu appears automatically.
ページ6に含まれる内容の要旨
Manual store This menu is used to store the programmes “ Search : press ¬.The search starts. one at a time or to add a programme to the Once a programme is found, the scanning existing list. stops. Go to the next step. If you know the & Press the H key to display the MAIN MENU. frequency of the required programme, enter its Select INSTALLATION with the cursor then number directly with the 0 to 9 keys. the manual store menu then press . If no picture is found, consult the possible solutions (p. 1
ページ7に含まれる内容の要旨
Picture settings Description of the adjustments : & Press H, select PICTURE and press ¬. The PICTURE menu appears : • Brightness : this changes the picture brilliance. • Colour : this changes the intensity of the PICTURE MAIN MENU colour. Brightness ---I------- PICTURE SOUND Colour • Contrast : this changes the difference FEATURES INSTALLATION Contrast between the light and dark tones. Sharpness Colour Temp. Normal • Sharpness : this changes the picture NR OFF definition. Contrast+ ON Store • Co
ページ8に含まれる内容の要旨
Timer function This menu lets you use the TV set as an alarm ‘ Time : enter the current time. clock. ( Start Time : enter the start time. & Press the H key. § Stop Time : enter the stop time. é With the cursor select the FEATURES menu è Program No. : enter the number of the then Timer : desired programme for the wake-up alarm. ! Activate : you can set : MAIN MENU • Once for a single alarm, Timer PICTURE SOUND Sleep OFF • Daily for each day, FEATURES Time -- : -- INSTALLATION • Off to cancel. Sta
ページ9に含まれる内容の要旨
Teletext Teletext is an information system broadcast by certain channels which can be consulted like a newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language (cable networks, satellite channels, etc.). Press : You will obtain: Teletext call This is used to call teletext, change to transparent mode ¤ and then exit.The summary appears with a list of items that can be accessed. Each item has a corresponding 3 digit page
ページ10に含まれる内容の要旨
VCR Connecting peripheral equipment Video recorder Carry out the connections shown opposite, using a good quality euroconnector cable. If your video recorder does not have a euroconnector socket, the only connection possible is via the aerial cable.You will therefore need to tune in your video recorder's test signal and assign it programme number 0 (refer to manual store, p. 6). To reproduce the video recorder picture, press 0. Video recorder with decoder Connect the decoder to the second euroco
ページ11に含まれる内容の要旨
Glossary RGB Signals : These are 3 Red, Green and Blue video signals which directly drive the red, green and blue emitters in the cathode ray tube. Using these signals provides better picture quality. NICAM sound : Process by which digital sound can be transmitted. System : Television pictures are not broadcast in the same way in all countries.There are different standards: BG, DK, I, and L L’.The SYSTEM setting (p. 6) is used to select these different standards.This is not to be confused with P
ページ12に含まれる内容の要旨
Tips Poor reception The proximity of mountains or high buildings may be responsible for ghost pictures, echoing or shadows. In this case, try manually adjusting your picture : see Fine T uning (p.6) or modify the orientation of the outside aerial. Does your antenna enable you to receive broadcasts in this frequency range (UHF or VHF band) ? In the event of difficult reception (snowy picture) switch the NR on the Picture menu to ON (p. 7). Have you connected the aerial socket properly ? No pict
