ページ1に含まれる内容の要旨
OWNER'S MANUAL
68CM CORDLESS REMOTE COLOUR TELEVISION
MODEL: 6825G
Type Tested
Electrical
Safety
AS/NZS 3250 Lic 4166
Standards Australia
APP No: N15899
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL:(02)9313 7111
FAX:(02)9313 7555
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA:1300 657 888
ページ2に含まれる内容の要旨
Contents Contents Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain this manual in an easily accessible location for future reference. Note: Screen displays and illustrations in this manual may differ from the actual ones for better visibility. CONTENTS Features ...................................................................
ページ3に含まれる内容の要旨
Features Features Hyperband 2 Intellectualized I C bus control 256 preset channels Full function remote control AV input & output terminals, DVD input terminals Intellectualized remote controller caller Automatic channel preset Clock/Game/Calendar ON timer/OFF timer Channel Exchange Selectable picture and selectable sound 1
ページ4に含まれる内容の要旨
Important Safety Cautions Safety Cautions 1 When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. 2 Do not expose the TV set to rain or excessive moisture. Avoid using the set in very warm or damp places and never use it in a bathroom. 3 When cleaning dust off the picture tube disconnect the power first. You can wipe lightly with a piece of dry, clean and soft cloth. 4 Avoid exposi
ページ5に含まれる内容の要旨
! This TV set can operate on an AC power of 240V, 50HZ. You must not use a power supply of any other type. 5 High voltage exists in this TV set. Do not remove the cover 6 Do not cover the ventilating hole in the cabinet Keep a space of more than 5cm from the walls to the TV set to ensure adequate ventilation. 7 If the power cord or the plug is damaged contact a qualified service department for service. 8 When the TV set is to be left unattended for a long period of time, turn off the power suppl
ページ6に含まれる内容の要旨
Identification of Controls Front 1. TV/VIDEO input select. 2. Volume up; menu item adjust. 3. Volume down; menu item adjust. 4. To enter menu operation. 5. Channel up; menu item select. 6. Channel down; menu item select. 7. To call remote controller. 8. AV3 inputs (VIDEO, AUDIO L/MONO, R) 4
ページ7に含まれる内容の要旨
Back 3 1 4 5 2 6 1. Antenna input. 2. DVD inputs (VIDEO: Y, C , C , AUDIO L/MONO, R). B R 3. AV 2 inputs (VIDEO, AUDIO L/MONO, R). 4. S-VIDEO input. 5. AV outputs (VIDEO, AUDIO L/MONO, R). 6. AV 1 inputs (VIDEO, AUDIO L/MONO, R). 5
ページ8に含まれる内容の要旨
Identification of Controls (continued) Remote Controller The switch of the remote controller caller Power on/standby Direct channel selector TV/VIDEO input select Previous channel Colour and sound system select To enter menu operation Volume up/dowm select; Channel up/down select; menu item adjust menu item select Channel edit Picture mode select To enter game/Serve as confirm To enter/exit game menu button in GOBANG game Game controller To mute the sound Sleep timer Program scanning Sound mode
ページ9に含まれる内容の要旨
Effective range of the Remote Installing batteries 1 Open the battery cover. 2 Install two "AAA" batteries matching the +/- polarities of the battery to the +/- marks inside the battery compartment. 3 Replace the battery cover. ! Notes: When there is an obstacle between the TV and the transmitter, the transmitter may not operate. ! Notes: When direct sunlight, and incandescent lamp, The battery life should be about one year under fluorescent lamp or any other strong light shines on normal use.
ページ10に含まれる内容の要旨
INSTALL the unit in a room where direct light will not fall upon the screen. Installation Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Antenna installation Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used. The exact type and position of the aerial will depend upon your particular area. Notes: ! It is recommended that the 75-ohm coaxial ca
ページ11に含まれる内容の要旨
This TV set provides 3 groups of AV input (including one group of DVD inputs) and 1 group of AV out puts for your convenient connection to VTR, DVD or video camera to enjoy the high quality picture. Please refer to the owner's manual of the equipment to be connected as well. Using AV Inputs ! Notes: In AV1 inputs, the S-VIDEO terminal is prior to the VIDEO1 terminal. When both S-VIDEO and video signals are input, the S-VIDEO signal is selected. To view a video sognal, disconnect the S-VIDEO conn
ページ12に含まれる内容の要旨
Installation (continued) Using DVD inputs Using AV outputs 10
ページ13に含まれる内容の要旨
Turning on/off Turning on Press the Power Switch on the 1 TV set. The TV set is in STANDBY and the Yellow indicator lights up. 2, 2 In STANDBY mode, press the button or 0-9 buttons 2 on the remote controller and the TV set is turned on. In STANDBY mode, you can also press the 3 VOL , CH or TV/AV button on the set to turn on. Notes: ! If there is no input signal, then a blueback appears. After 15 minutes, the set auto goes to STANDBY. Turning off Press the Power Switch on the T
ページ14に含まれる内容の要旨
Select Input Signal Watching AV program To watch video program from AV input, PressTV/AV 1 button repeatedly until you see the appropriate input indicator on the screen Video1 Video2 Video3 10 ! Notes: 2 In AV1 inputs, the S-VIDEO terminal is prior to the VIDEO1 terminals. When both S-video and video signal are input, the S- video signal is selected (the OSD is "S-VIDEO1"). To view a video 4 signal, disconnect the S-VIDEO connection. 1, 1 The AV2 inputs and the DVD inputs use the same audio term
ページ15に含まれる内容の要旨
Tuning in To enter the SEARCH menu Press MENU button. 1 Press VOL+ or VOL- button to 2 select SEARCH icon. Press CH- button to disply 3 the Serach menu. 2, 2 Auto Search Please enter the SEARCH menu first Press CH+ or CH- button to 1 select AUTO MEMORY item. 1 1 Press VOL+ button to start 2 2 AUTO MEMORY. 2 All active channels will be preset and stored into the memory automatically. 3 After presetting, the TV will stop at the first channel program. Notes: ! During the process of AUTO MEMORY, pre
ページ16に含まれる内容の要旨
Tuning in (continued) Manual Search Please enter the SEARCH menu first Use MANUAL SEARCH function if desired channels cannot be preset or if you would like to preset channels to specific position numbers one by one Press CH+ or CH- button to select POSITION item. 1 Press VOL+ or VOL- buttons to select a channel 2 number (ranging from 000~255). Press CH+ or CH- button to select SEARCH item. 3 Press VOL+ or VOL- button to start program search 4 manually. Pressing VOL+, the set searches towards hig
ページ17に含まれる内容の要旨
Fine tuning Please enter the SEARCH menu first Fine tuning is not necessary under normal conditions. However, in area of inferior broadcast conditions where adjustment is necessary for better picture and sound, use Fine tuning. Press CH+ or CH- button to select POSITION item. 1 Press VOL+ or VOL- buttons to select a channel number 2 you want to fine-tune (for example, channel 99). Press CH+ or CH- button to select MFT item. 3 1,3 Press and hold VOL+ or VOL- button till the best 4 possible pictur
ページ18に含まれる内容の要旨
Channel Selection Using 0-9 direct channel selector 1 To select one-digit channel There are 3 ways for you to select an one-digit channel number, for example, channel 9 as follows. After 2 Press "9" 9 - - 9 A seconds button Press "0" Press "9" After 2 0 9 - 9 B 0 - - button button seconds Press "0" Press "0" Press "9" 0 0 - 9 C 0 - - button button button 2 To select two-digit channel There are 2 ways for you to select a two-digit channel number, for 4 1, 1 example, channel 19 as follows Press "1
ページ19に含まれる内容の要旨
Adjusting Picture Adjusting picture Press MENU button. 1 Press VOL+ or VOL- button to 2 select PICTURE icon. Press CH- button to disply 3 the PICTURE menu. 2, 2 Press CH+ or CH- button to select item. 4 Picture mode Press VOL+ or VOL- button to adjust. 5 Picture mode PERSONAL Item BRILLIANT STANDARD SOFTNESS VOL - VOL + 1 50 50 Color 75 paler deeper Brightness 75 50 50 darker lighter 2,4 Contrast weaker stronger 100 90 70 2,5,3 Sharpness 50 softer sharper 40 30 purplish greenish Tint 6 * Note: T
ページ20に含まれる内容の要旨
Sound Control Adjusting volume Use VOL+ or VOL- button. 1 Press VOL+ button, the volume increases; Press VOL- button, the volume decreases. Use MUTE button. 2 If you want to mute the sound, press MUTE button on the remote. To resume the sound, press this button again. ! Notes: You can also resume the sound by pressing VOL+ or VOL- button. 1 Selecting sound mode You can quickly select sound mode by pressing S.M button. 2 NATURAL S.M THEATER NEWS MUSIC 18
