ページ1に含まれる内容の要旨
TM
AccuSync 500/700/700M/900
Covercontents 1 11/11/03, 1:46 PM
ページ2に含まれる内容の要旨
Index Warning .................................................................................................................... 1 Contents ................................................................................................................. 2 Quick Start ............................................................................................................. 3 Controls .............................................................................................................
ページ3に含まれる内容の要旨
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK • DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS IN
ページ4に含まれる内容の要旨
Contents ™ Your new NEC AccuSync monitor box* should contain the following: • AccuSync Monitor with tilt/swivel base • Power Cord • Captive Signal Cable • User’s Manual Captive Signal Cable Captive Signal Cable Power Cord TM AccuSync 500/700/700M/900 User’s Manual * Remember to save your original box and packing material to transport or ship the monitor. 2 AS500700700M900FINAL2.p65 2 11/11/03, 1:45 PM
ページ5に含まれる内容の要旨
Quick Start Connecting the Tilt/Swivel stand 1. With the monitor unplugged from your system and the wall outlet, carefully turn the monitor down on a firm table 2. Align the hooks on the tilt/swivel stand with the matching slots in the base of the monitor. 3. Insert the hooks into slots. 4. Slide the tilt/swivel stand toward the front of the monitor until the latches click into the locked position. NOTE: For correct use of monitor, completely attach tilt/swivel base to the monitor. NOTE: To avoi
ページ6に含まれる内容の要旨
Quick Start –continued ™ To attach the AccuSync monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. If necessary, install the display card into your system. For more information, refer to the display card manual. 3. For the PC: Plug the end of the video signal cable of the monitor in the video signal connector of the computer. (Figure A.1). Tighten all screws. For the Mac: Connect the Macintosh cable adapter (not included) to the monitor connector on the
ページ7に含まれる内容の要旨
Quick Start –continued Figure B.1 Mac Adapter (Not Included) 15-pin mini D-SUB Captive Signal Cable Figure C.1 Power Outlet Power Cord 5 AS500700700M900FINAL2.p65 5 11/11/03, 1:45 PM
ページ8に含まれる内容の要旨
Controls (AccuSync 500) OSD (On Screen Display) control buttons on the front of the monitor function as follows: Control Function Use this button to turn the monitor on or off. Power Button This Indicator lights up green when the monitor Power (DPMS) operates normally. If the monitor is in DPMS Indicator (Energy Saving) mode, this indicator color changes to amber. MENU (or OSD) Use this button to enter or exit the on screen Button display. Use these buttons to choose or adjust items in Buttons
ページ9に含まれる内容の要旨
Controls –continued (AccuSync 700/900) OSD (On Screen Display) control buttons on the front of the monitor function as follows: MENU SELECT Control Function Use this button to turn the monitor on or off. Power Button This Indicator lights up green when the monitor Power (DPMS) operates normally. If the monitor is in DPMS Indicator (Energy Saving) mode, this indicator color changes to amber. MENU (or OSD) Use this button to enter or exit the on screen Button display. Use these buttons to choose o
ページ10に含まれる内容の要旨
Controls –continued (AccuSync 700M) OSD (On-Screen Display) control buttons on the front of the monitor function as follows: 1 2 3 4 5 6 7 Control Function Use to mute audio source. Audio Mute 1 Built-in microphone. Microphone 2 MENU (or OSD) Use this button to enter or exit the on screen 3 Button display. Brings up to the audio menu. Buttons 4 Use these buttons to choose or adjust items in the Buttons on screen display. SELECT (or SET) Use this button to enter a selection in the on 5 screen di
ページ11に含まれる内容の要旨
Controls –continued (AccuSync 700M) Side Jacks Headphone Jack Automatically mutes the speaker volume when the headphones are plugged in. Microphone Jack Can be used instead of the built-in micro- phone. Rear Panel Jacks Audio In -Sky Blue Connects to the *LINE OUT jack of the PC sound card. AUDIO MIC. IN OUT Mic Out - Pink Connects to the microphone jack of the PC sound card. Microphone Operation Using this jack reduces the length of cable needed to reach the PC's sound card. In order to use the
ページ12に含まれる内容の要旨
Controls –continued Screen Adjustment Making adjustments to the image size, position and operating parameters of the monitor is quick and easy with the On Screen Display Control system. A short example is quick and easy given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. NOTE: Allow the monitor to stabilize for at least 30 minutes before making image adjustments. To make adjustmen
ページ13に含まれる内容の要旨
Controls –continued The following table indicates all the On Screen Display control, adjustment, and setting menus. Main menu Sub menu Reference To adjust the brightness and Brightness contrast of the screen BRIGHTNESS/ Contrast CONTRAST To adjust the position of the screen V Position POSITION H Position To adjust the size of the screen V Size SIZE H Size Tilt To adjust the shape of the screen Side Pincushion GEOMETRY S Pincushion Balance Parallelogram Trapezoid T
ページ14に含まれる内容の要旨
Controls –continued Brightness To adjust the brightness of the screen. Contrast To adjust the contrast of the screen. Vertical Position To move image up and down. Horizontal Position To move image left and right. Vertical Size To adjust image height. Horizontal Size To adjust image width. Tilt GEOMETRY To correct image rotation. OSD Adjust Description Side Pincushion To correct a concave or convex bowing of the image. Side Pincushion Balance To correct the balance of both sides bowing. Parallelo
ページ15に含まれる内容の要旨
Controls –continued PRESET 6500K/ 9300K Select the screen color. • 6500K: Slightly reddish white. • 9300K: Slightly bluish white. TEMP Select the screen temperature which you prefer among reddish or bluish or any color in between. RED Set your own color levels. GREEN BLUE VIDEO LEVEL This item is used to select the monitor's input signal level. The normal level used for most PCs is 0.7V. If the screen becomes suddenly washed-out or blurred, please select 1.0V and try again. LANGUAGE To choose th
ページ16に含まれる内容の要旨
Controls –continued RESET Return to all factory default settings except "LANGUAGE": Brightness, Contrast, Tilt, Color 9300K, Video Level, OSD Time, Moire (These reset options may differ depending on the mode selected: Preset, User, or New). If you don’t want to reset the monitor, use the button to select CANCEL and then press the SELECT (or SET) button. This item allows you to reduce the degree MOIRE of moire. (Moire is caused by interference Horizontal Scan Line with the periodical dot
ページ17に含まれる内容の要旨
Controls –continued (AccuSync 700M) VOLUME 70 ON Main Menu Description Raises or lowers audio level. VOLUME Raises or lowers treble level. TREBLE Raises or lowers bass level. BASS Changes levels of left/right speaker. BALANCE Enables or disables microphone usage. MICROPHONE : Adjustable 15 AS500700700M900FINAL2.p65 15 11/11/03, 1:45 PM
ページ18に含まれる内容の要旨
Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING ™ THE ACCUSYNC COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your monitor near water. • Do not insert objects of any kind into the cabinet sl
ページ19に含まれる内容の要旨
Recommended Use –continued CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. • Position your monitor no closer than 12 inches and no further away than 28 inches from your eyes. The optimal distance is 18 inches. • Rest your eyes periodi
ページ20に含まれる内容の要旨
Specifications (AccuSync 500) Picture Tube 15 inches (14.0 inches viewable) 90 degree deflection 0.27mm dot pitch AGAS (Anti-Glare, Anti-Static) coating Sync Input Horizontal Freq. 30 - 71kHz (Automatic) Vertical Freq. 55 - 120Hz (Automatic) Input Form Separate TTL, Positive/Negative Signal Input 15 pin D-Sub Connector Video Input Input Form Separate, RGB Analog, 0.7Vp-p/75 ohm, Positive Plug & Play DDC 2B 63W Normal Power Stand-by/Suspend ≤ 15W Consumption DPM Off ≤ 5W 640 x 480 @ 60Hz
