ページ1に含まれる内容の要旨
Color television
OWNER’S MANUAL
MODELS: 30FZ1DC
32FZ1DC-UB
R
TruSurround XT
Please read this manual carefully and completely before
operating your TV.
Retain this manual for future reference.
Record model number and serial number of the TV in the
spaces provided below.
See the label attached on the back cover and relate this
information to your dealer if you require service.
Model Number :
Serial Number :
LG Electronics U.S.A., Inc.
ページ2に含まれる内容の要旨
WARNING/CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the appa- ratus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled “Important Sa
ページ4に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped. 15. CAUTION concerning the Power Cord : Most
ページ5に含まれる内容の要旨
Table of Contents Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 EZ SoundRite . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Important Safety Instructions . . . . . . . . . . . . . . . . .3-4 Stereo/SAP Broadcasts Setup . . . . . . . . . . . . . . . . . .28 EZ Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Manual Sound Control . . . . . . . . . . . . . . . . . . . . . .29 Step 1. Hook Up TV TV Speaker on/off Setup . . . . . . . . . . . .
ページ6に含まれる内容の要旨
Front Panel Controls - Here shown may be somewhat different from your TV. CH VOL TV/VIDEO MENU 5 1 3 6 2 4 7 power 1 Standby indicator (Illuminates brightly when the TV is 2 in standby mode. Dims when the TV is switched on.) Remote control sensor 3 TV/VIDEO 4 menu 5 vol left/ right 6 Volume(G) button increases the sound level and vol- ume(F) button decreases the sound level. ch (Channel) up / down 7 These buttons work just as they do on your remote control. PAGE 6
ページ7に含まれる内容の要旨
Rear Connections Panel - Connecting external equipment to your TV. - Here shown may be somewhat different from your TV. CALIBRATION RF Connectors: Antenna Input, Digital Audio Used to connect Output Optical ANTENNA DIGITAL cable or antenna sig- Connects to external AUDIO OUTPUT +75 Ω OPTICAL nals to the television, audio equipment either directly or like a home theater through your cable system. COMPONENT1 COMPONENT2 box. DIGITAL (480i/480p/720p/1080i) AUDIO INPUT Digital Audio Input OPTICAL
ページ8に含まれる内容の要旨
R S-VIDEO VIDEO IN L/MONO AUDIO Front Connections Panel There are four jacks on the lower-right front front of your TV that make connecting Audio/Video devices like video games and camcorders very simple. The jacks are like those found on the back jack connection panel. This means that most equipment that connects to those types of jacks on the rear jackpack, may be connected to the Front connection panel (Front Video). To use the Front jacks as the signal source, select them using Main input
ページ9に含まれる内容の要旨
Antenna / Cable Service Hookup Cable TV Wall jack Antenna Connect an antenna and/or cable service to 1 RF coaxial wire RF coaxial wire your TV as shown. (75 ohm) (75 ohm) Turn to page 19 to do a channel search 2 with EZ Scan. CALIBRATION If you receive your RF signal through an antenna that is several years old and con- DIGITAL ANTENNA nects with two small prongs, you will need to AUDIO OUTPUT +75 Ω OPTICAL purchase a 300 to 75 ohm adapter. It should be available from your local electronics
ページ10に含まれる内容の要旨
Cable Box Connections Cable TV Wall jack panel Locate the output jack on the back of 1 your cable box. Connect this to the Cable jack on the back of your TV. In Out Output Switch Or find the composite video and audio 3 4 jacks on the back of your cable box, and connect them following the instructions RF coaxial wire provided with your equipment. (75 ohm) This can be combined with any other equipment you may want to hook up. ANTENNA +75 Ω COMPONENT1 COMPONENT2 (480i/480p/720p/1080i) R R AUDI
ページ11に含まれる内容の要旨
VCR Connections Locate the Cable jack on the back 1 of your TV. Connect this to out jack on the back of your VCR. Or find the composite video and audio jacks on the back of your VCR, and connect them following the instructions provided with Cable TV Wall your equipment. jack panel ANTENNA Antenna +75 Ω You may connect either the com- posite video or the S-Video cables to your TV. (Do not connect BOTH the composite and the S- Video COMPONENT1 COMPONENT2 cables. In the event that you con- Round
ページ12に含まれる内容の要旨
DVD Player CALIBRATION DVD player ANTENNA DIGITAL +75 Ω AUDIO OUTPUT OPTICAL Find the component or S-Video 1 jacks for video connections, Back AV panel COMPONENT1 COMPONENT2 DIGITAL (480i/480p/720p/1080i) depending on your DVD connec- AUDIO INPUT OPTICAL (DVI) tors. Then make the correspond- R R Digital Audio Audio L R Component Video Optical AUDIO AUDIO ing audio connections. See the L L diagram for either set up. PR PR HDMI/DVI You may connect either the PB PB 2 composite video or the S-Vi
ページ13に含まれる内容の要旨
Set-top box Hookup Find the audio and Y, PB, PR jacks or CALIBRATION 1 HDMI/DVI output port on the back of Set-top Box ANTENNA your set-top box and connect them fol- +75 Ω Digital Audio DIGITAL lowing the instructions provided with Optical Output AUDIO OUTPUT OPTICAL your equipment. Connect these cables to your TV as COMPONENT1 COMPONENT2 DIGITAL (480i/480p/720p/1080i) 2 or AUDIO INPUT shown. OPTICAL (DVI) R R AUDIO AUDIO L L PR PR HDMI/DVI Set-top Box PB PB Y Y Component Out Audio DVD/D
ページ14に含まれる内容の要旨
Digital Audio Output Send the TV’s audio out to external audio equipment (stereo system) via the Digital Audio Output Optical port. Connect one end of an optical cable to 1 the TV Digital Audio Optical Output port. Connect the other end of the optical cable 2 to the digital audio optical input on the audio equipment. See the external audio equipment instruc- tion manual for operation. CALIBRATION ANTENNA +75 Ω DIGITAL AUDIO OUTPUT OPTICAL Caution: Do not look into the optical output port. Look
ページ15に含まれる内容の要旨
HDMI TM - HDMI , the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC." - This DTV can receive the High-Definition Multimedia Interface(HDMI) or Input of Digital Visual Interface(DVI). - This DTV supports HDCP(High-bandwidth Digital Contents Protection) Protocol for DTV(480p, 720p, 1080i) modes. - When you Connect with HDMI Source Devices (DVD Player or Set Top Box) supporting Auto HDMI function, automatically, support Plug & Play a
ページ16に含まれる内容の要旨
Remote Control Functions in TV Mode MODE INDICATOR MODE LIGHTS Selects the remote operating mode: Show active remote mode TV, VCR, Cable, DVD or Satellite. every time any button is Select other operating modes, for pressed. TV VCR CABLE DVD SAT the remote to operate external devices. TV/VIDEO MODE POWER TV/VIDEO Selects: Antenna, Cable, Video1, Video2, Front video, Component 1-2 and HDMI/DVI input sources. VIDEO1 FRONT VIDEO1 VIDEO2 Selects the Video1 input source. COMP1 COMP2 HDMI COMP2 Selects
ページ17に含まれる内容の要旨
Remote Control Functions in TV Mode TV VCR CABLE DVD SAT VIDEO2 POWER Selects the Video2 input source. Turns your TV or any other MODE POWER TV/VIDEO programmed equipment on or off, depending on mode. COMP1 VIDEO2 FRONT VIDEO1 Selects the Component 1 input FRONT source. Selects the front video input source. COMP1 COMP2 HDMI 1 2 3 HDMI Selects the HDMI input source. NUMBER KEYPAD For direct channel selection and 4 5 6 programming functions. 7 8 9 DASH(-) Is used to enter a program num- DASH(-) F
ページ18に含まれる内容の要旨
Turning the TV On First, connect antenna cable and power cord correctly. At this moment, the TV switches to standby mode. 1 In standby mode to turn TV on, press the POWER, CH +/-, TV/VIDEO, FRONT or number buttons on the remote control or TV/VIDEO or CH / on the TV. D E Select the viewing source by using TV/VIDEO, COMP, FRONT or HDMI button on the remote control. 2 This TV is programmed to remember which mode it was last set to, even if you turn the TV off. Note: See page 19 if you have not auto
ページ19に含まれる内容の要旨
EZ Scan (Channel Search) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Use pages 9-14 to connect external 1 equipment to your TV. If you have done so, plug in your TV to a standard 120V, 60Hz power outlet. TV VCR CABLE DVD SAT MODE TV/VIDEO POWER 3 VIDEO1 VIDEO2 FRONT COMP1 COMP2 HDMI 1 2 3 If you have done so, remove the back of 2 4 5 6 the remote and install in two AA batter- ies. Make sure batteries are properly 7 8
ページ20に含まれる内容の要旨
Channel Edit Create two different types of channel lists in memory: “Custom list” and “Favorite channel list” from the default channel list made in the EZ scan menu. A custom list can be created by toggling each channel on or off with the (Enter) key. Once a channel is highlighted, you will be able to see whether the channel is currently added or deleted by referring to the small window at the top-left corner of the screen. TV VCR CABLE DVD SAT You can create your own favorite channel list
