JVC TM-A101Gの取扱説明書

ページ1に含まれる内容の要旨

COLOR VIDEO MONITOR
BEDIENUNGSANLEITUNG : FARB-VIDEO-MONITOR
MANUEL D’INSTRUCTIONS : MONITEUR VIDEO COULEUR
MANUALE DI ISTRUZIONI : MONITOR VIDEO A COLORI
INSTRUCCIONES : MONITOR DE VIDEO A COLOR
INSTRUCTIONS
TM-A101G
For Customer Use:
Enter below the Serial No. which is located on the rear of the cabinet.
Retain this information for future reference.
Pour l’usage du client:
Enter ci-dessous le numéro de série qui est situé sur l’arrière du coffret.
Conserver cette information pour une référence

ページ2に含まれる内容の要旨

Cover.pm6 3 03.8.28, 6:53 PM

ページ3に含まれる内容の要旨

INSTRUCTIONS COLOR VIDEO MONITOR TM-A101G Thank you for purchasing this JVC color video monitor. Before using it, read and follow all instructions carefully to take full advantage of the monitor’s capabilities. EN_LCT1024-001C-H.pm6 1 03.8.28, 6:54 PM ENGLISH

ページ4に含まれる内容の要旨

SAFETY PRECAUTIONS In order to prevent any fatal accidents caused by misoperation FCC INFORMATION (U.S.A. only) or mishandling the monitor, be fully aware of all the following precautions. CAUTION: Changes or modification not approved by JVC could void the user's authority to operate the equipment. WARNINGS To prevent fire or shock hazard, do not expose this NOTE: This equipment has been tested and found to monitor to rain or moisture. Dangerous high voltages comply with the limits for a Class B

ページ5に含まれる内容の要旨

POWER CONNECTION The power supply voltage rating of this product is AC 120 V (For U.S.A. and Canada only) and AC 230 V (For European countries or United Kingdom), the power cord attached conforms to the following power supply voltage and countries. Use only the power cord designated to ensure Safety and EMC regulations of each countries. Power cord Power supply voltage : AC 120 V AC 230 V AC 230 V Countries : U.S.A. and Canada European countries United Kingdom Warning: ● Do not use the same Pow

ページ6に含まれる内容の要旨

CONTROLS AND FEATURES FRONT VIEW 1 2 56 9 POWER CHROMA CONTRAST VOLUME/SELECT MENU AB ON OFF INPUT SELECT PHASE BRIGHT POWER CHROMA CONTRAST VOLUME/SELECT MENU AB ON OFF PHASE BRIGHT INPUT SELECT 3 4 7 8 Chroma/Phase button Input A (VIDEO) button [INPUT SELECT A] 1 5 [ CHROMA/ PHASE] Selects the video and audio signals input to the VIDEO A 0 and AUDIO A @ terminals on the rear panel. The Press this button to activate the picture color density button lights when selected. adjustment

ページ7に含まれる内容の要旨

REAR VIEW VIDEO A 10 VIDEO A IN OUT IN OUT VIDEO B VIDEO B IN OUT 11 AUDIO A IN OUT IN OUT IN OUT AUDIO B AUDIO A INPUT ASPECT REMOTE 12 IN OUT 13 IN OUT AUDIO B 14 INPUT ASPECT REMOTE 10 Video A terminals [VIDEO A IN/OUT] Audio B terminals [AUDIO B IN/OUT] 13 Video signal input (IN) and output (OUT) terminals. Input (IN) and output (OUT) terminals for the audio The output terminal is bridge-connected. signals corresponding to the VIDEO B terminals ! . IN : Video signal input termin

ページ8に含まれる内容の要旨

CONTROLS AND FEATURES (cont’d) REAR VIEW 15 VIDEO A 16 To AC outlet IN OUT VIDEO B (120 V AC, For U.S.A. and Canada IN OUT 50 Hz/60 Hz) AUDIO A IN OUT To AC outlet IN OUT AUDIO B (230 V AC, 16 INPUT ASPECT 50 Hz/60 Hz) REMOTE For Europe 16 For the United Kingdom AC inlet [AC IN] 15 16 Power cord Power input connector. Connect the provided AC power Connects the provided power cord (120 V AC or cord ^ to an AC outlet (120 V AC or 230 V AC, 230 V AC, 50 Hz/60 Hz) to the AC IN connector

ページ9に含まれる内容の要旨

HOW TO HANDLE BASIC OPERATIONS BASIC OPERATION STATUS indication (PAL or NTSC) 1. Press the POWER switch to turn on the power. PAL gON : Power turns ON. (Power indicator: lit) POWER GOFF : Power turns OFF. (Power indicator: unlit) ON OFF 2. Press the INPUT SELECT buttons to choose input. Select video/audio signals input to terminals on the rear panel. The selected button lights in green. About the STATUS indication AB INPUT Terminals on the rear panel ● With the COLOR SYSTEM setting set SELECT t

ページ10に含まれる内容の要旨

HOW TO USE THE MENU FUNCTIONS DISPLAY AND SELECTION IN THE

SCREEN MODE (SETTING) screen You can set the following menu items. Set them depending on your needs. 1 < MENU > ‰ SHARPNESS : +03 • SHARPNESS • ASPECT RATIO COLOR SYSTEM : AUTO • COLOR SYSTEM ASPECT RATIO : 4–3 2 3 1. Press the MENU button. MENU The screen is displayed. EXIT 4 * The screen automatically disappears when no operation is performed after about 5 minutes. 2. Press the CHROMA/PHASE

ページ11に含まれる内容の要旨

DISPLAY AND SELECTIONS IN THE MODE (SETTING) screen You can set the following set-up menu items. • H. POSITION • CONTROL LOCK • INPUT REMOTE 1 • WHITE BALANCE • STATUS DISPLAY • ASPECT REMOTE ‰ H. POSITION : 00 WHITE BALANCE CONTROL LOCK : OFF Note: STATUS DISPLAY : ON INPUT REMOTE : OFF ASPECT REMOTE : OFF ● Parameter for H. POSITION can be set separately depending on the video input (Input A (VIDEO) or Input B (VIDEO)) selected by the input select bu

ページ12に含まれる内容の要旨

HOW TO USE THE MENU FUNCTIONS (cont’d) Set-up menu items Purpose Settings H. POSITION Adjusts the horizontal position of the screen (+ : Horizontal position –05 –04 • • • • • • –01 00 +01 • • • • • • +04 +05 shifts to the right/–: Horizontal position shifts to the left) WHITE BALANCE Adjusts the white balance Selects DRIVE (DRV) or CUT OFF (CUTO) adjustment. Screen setting is changed to the selected setting mode. + + + DRIVE R.DRIVE Adjusts red level –09 –08 • •

ページ13に含まれる内容の要旨

HOW TO INITIALIZE THE SETTING SCREEN DISPLAY AND SELECTIONS IN THE RESET MODE You can set

and screen items, picture adjustment items and RESET screen the volume level to their factory-set (initial) values. RESET Are you sure ? 1. Press the Power ( ) switch to turn the power “Yes” then <+> “No” then OFF (G). POWER ON OFF 2. While pressing both MENU button and CHROMA/ Initial settings PHASE button, press

ページ14に含まれる内容の要旨

BASIC CONNECTION EXAMPLE Notes: • Before connecting your system, make sure that all units are turned off. • The illustration below shows some examples of different connections. Terminal connections may differ depending on the component connected. Be sure to refer to the instructions provided with the unit(s) you are connecting. • Each pair of input (IN) and output (OUT) terminals are bridge-connected. • If you’re not connecting any equipment to a bridged output (OUT) terminal, be sure not to con

ページ15に含まれる内容の要旨

TROUBLESHOOTING Solutions to common problems related to your monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance. Problems Points to be checked Measures (Remedy) No power supply. Is the power plug loosened or disconnected? Firmly insert the power plug. No picture with the Is the video signal output from the connected Set the connected component correctly. power on. componen

ページ16に含まれる内容の要旨

SPECIFICATIONS  Audio power output : 1 W (monaural)  Type : Color video monitor  Built-in speaker : 8 cm round x 1  Color system : PAL, NTSC (3.58) impedance of 8 Ω  Picture tube : 9-7/8" (25 cm) measured  Environmental diagonally, conditions : Operation temperature: 90° deflection, in-line gun, 0°C – 40°C (32°F – 104°F) trio-dot type (phosphor dot-trio Operation humidity: pitch 0.5 mm) 20 % – 80 % (non-condensing)  Effective screen size : Width 6-15/16" (175 mm)  Power requirements : 12

ページ17に含まれる内容の要旨

 Dimensions Unit : inch (mm) < Side View > < Front View > 12-1/2 (316.3) 12 (304.8) 8-3/4 (222) 1/16 (1.5) * 7-1/8 (178) CHROMA CONTRAST VOLUME/SELECT MENU POWER AB ON OFF INPUT SELECT PHASE BRIGHT 6-1/2 (164) 2-1/2 (63.5) 8-3/4 (222) ø7/8 (ø22) * Asterisks ( ) are used to indicate front panel * dimensions. 15 EN_LCT1024-001C-H.pm6 15 03.8.28, 6:54 PM 5-5/8 (140) * 5 (124) 8-3/4 (220) 3/8 (7) 3/8 (7) ENGLISH

ページ18に含まれる内容の要旨

VICTOR COMPANY OF JAPAN, LIMITED EN_LCT1024-001C-H.pm6 16 03.8.28, 6:54 PM

ページ19に含まれる内容の要旨

BEDIENUNGSANLEITUNG FARB-VIDEO-MONITOR TM-A101G Vielen Dank für den Kauf dieses Farb-Monitors von JVC. Bitte lesen Sie diese Bedienungsanleitung vor Ingebrauchnahme sorgfältig durch, um einen einwandfreien Betrieb sicherzustellen. GE_LCT1024-001C-H.pm6 1 03.8.28, 6:54 PM DEUTSCH

ページ20に含まれる内容の要旨

SICHERHEITSHINWEISE Zur Vermeidung von Unfällen (mit Todesgefahr), die durch FCC-HINWEISE (nur für die USA) unsachgemäße Handhabung und Bedienung des Monitors ACHTUNG: Umbauten und Veränderungen am Gerät verursacht werden können, unbedingt die folgenden ohne Zustimmung von Sensormatic können zum Sicherheitshinweise beachten! Erlöschen der Betriebserlaubnis für dieses Gerät führen. HINWEIS: Es wird bestätigt, daß dieses Gerät geprüft ACHTUNG wurde und den Grenzdaten für digitale Vorrichtungen der