ページ1に含まれる内容の要旨
COLOUR TELEVISION
Contents
MODEL WITH THE TELETEXT FUNCTION
Knowing your TV’s features .......................... 2
AV-1414FE
.
Remote control buttons and basic functions 3
AV-2114YE
..............................
TV buttons and functions 5
MODEL WITHOUT THE TELETEXT
........................................
Setting up your TV 6
FUNCTION
.................................
Basic setting for picture 8
.........................
Advanced setting for picture 9
AV-1403AE
...........................
Orig
ページ2に含まれる内容の要旨
Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual throughly before you begin. Safety Instructions WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV. 1 Operate only from the power source indicated on the rear of the TV. 2 Avoid damaging the power cord and mains plug. When unplugging the TV,
ページ3に含まれる内容の要旨
Remote control buttons and basic functions 1 1 8 6 6 3 9 7 2 0 2 9 8 3 7 0 5 4 5 4 RM-C1261 WITHOUT THE TELETEXT FUNCTION RM-C1260 (AV-1403AE/AV-1403FE/AV-1404AE/ WITH THE TELETEXT FUNCTION AV-1404FE/AV-14A14/AV-14F14/ (AV-1414FE/AV-2114YE) AV-2103CE/AV-2103DE/AV-2103YE/ AV-2103TE/AV-2104CE/AV-2104DE/ AV-2104QE/AV-2104TE/AV-2104YE/ AV-21C14/AV-21E14/AV-21F14/AV-21U4) No.Press To 1 POWER Turn on or off the TV from standby mode. 2 MENU/OK Display menu and confirm selected function. 3 5/∞/2/3 Selec
ページ4に含まれる内容の要旨
Remote control buttons and basic functions How to operate menus and menu locations TO Operation Note Display the MENU. Press the MENU/OK button 2.To exit the MENU, press the DISPLAY/BACK button* 8 or choose EXIT menu. Display the top menu. Press 5/∞ buttons 3 to choose a menu title. Press ∞ button 3 to display the Then press MENU/OK button 2. next page for more functions. Display the 2nd menu. Press 5/∞ buttons 3 to choose a menu title. Then press MENU/OK button 2. Display the 3rd menu. Press 5/
ページ5に含まれる内容の要旨
TV buttons and functions The following illustrations are for AV-1404FE and AV-1403AE only, which are used for explanation purpose. Your TV may not look exactly like the illustrated. Front of the TV 9 8 7 6 5 4 3 2 1 AV-1404FE MENU VIDEO AUDIO OK IN (VIDEO-2) 9 8 7 6 5 4 2 1 VIDEO AUDIO IN (VIDEO-2) AV-1403AE MENU CHANNEL VOLUME OK Rear of the TV VIDEO-1 VIDEO-1 AV-1404FE AV-1403AE OUTPUT OUTPUT INPUT INPUT VIDEO VIDEO AUDIO AUDIO = - 0 = - 0 No. Button/terminal Description 1I (main power)
ページ6に含まれる内容の要旨
Setting up your TV CAUTION • Turn off the equipment including the TV before connecting. 1 Connecting the aerial To install rod aerial Install into the top-rear aerial holder. Once installed, it cannot be removed. indoor aerial * For model 14” series only Rod aerial* Aerial holder VHF/UHF outdoor aerial Rear of the TV VIDEO-1 OUTPUT INPUT VIDEO AUDIO If you connect a VCR, connect the aerial output jack of your VCR and the aerial jack on the TV with the aerial cable. Then connect the output jacks
ページ7に含まれる内容の要旨
Setting up your TV (continued) 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps as below: êìëëäàâ ìäê 7 •Press 5/∞ button to select your desired • Press the red button to cancel the SETUP language.* TOUR RESTART function. If you want to make initial settings again when the next time you turn on the TV, ≠ press the MENU/OK button to activat
ページ8に含まれる内容の要旨
Basic setting for picture To operate this function with a menu: COLOUR SYSTEM ❇ MENU PICTURE PICTURE MODE You can select the appropriate colour system when the picture is not clear or no colour To return the USER setting to the default, press appears. the blue button when the PICTURE SETTING menu appears. Press the COLOUR SYSTEM button to select a setting. In TV mode: Adjusting the picture - USER AUTO PAL SECAM You can adjust the desired picture setting when selecting USER in PICTURE MODE. In VI
ページ9に含まれる内容の要旨
Advance setting for picture ❇ MENU INSTALL BLUE BACK BLUE BACK If you wish to continue viewing the poor picture, You can set the TV to automatically change to a cancel the BLUE BACK function. blue screen and mute the sound if the signal is weak or absent, or when there is no input from an antenna. Select the BLUE BACK in the INSTALL menu, then choose ON or OFF. Original features for picture 2 Press a colour button, then press the TELETEXT number buttons to enter the page number. You can watch th
ページ10に含まれる内容の要旨
Basic setting for sound SOUND SYSTEM You can select an appropriate sound system when abnormal sound occurs even when the picture appears normally. Press the SOUND SYSTEM button to select a setting. B/G I D/K The function is not available in video mode. For the sound system in each country or region, see the table below: Area Country or Region System Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen, etc. B/G Indonesia, Malaysia, Singapore, Asia, Middle Thailand, India, etc. East China,
ページ11に含まれる内容の要旨
Favorite channel and video setting To register the favorite channel To adjust the video setting (VIDEO SETTING) You can register and recall 4 favorite channels by using the colour buttons (red, green, yellow, You can adjust the picture settings for video blue). inputs. 1 In TV mode, select a TV channel (PR01- 99) 1 Display the PICTURE menu and select you desired to register. VIDEO SETTING in PICTURE FEATURES menu. 2 Press and hold a colour button for 3 seconds or more. ❇ “FAVORITE CHANNEL 7 PROG
ページ12に含まれる内容の要旨
Customized setting To operate this function with a menu: VNR MENU FEATURES OFF TIMER ❇ You can reduce the noise. When the elapsed of time left one minute, Select the VNR in the PICTURE FEATURES menu “GOOD NIGHT!” appears on the screen. under PICTURE menu, then choose a setting of You can display the OFF TIMER menu again to VNR function. confirm or change the remaining time. MENU PICTURE PICTURE FEATURES ❇ VNR AUTO SHUTOFF OFF VNR is turned off. You can set the TV to turn off automatically AUTO E
ページ13に含まれる内容の要旨
TV channel presetting 5 Press the 3 button to choose an appropri- To register the TV channels auto- ate sound system. matically For details, see “SOUND SYSTEM” on page 10. You can register the TV channels into the TV’s channel list automatically. 6 Press the green or red button to search for the TV channel. 1 Display the INSTALL menu. Searching stops when a channel is found ❇ MENU INSTALL and displayed. 2 Choose AUTO PROGRAM, then press the 7 Repeat step 5 until your desired TV MENU/OK button. c
ページ14に含まれる内容の要旨
TV channel presetting Channel To add in the new channel CH US CCIR OIRT AUSTRALIA CH US CCIR OIRT AUSTRALIA (INSERT in the EDIT menu) CH 02 US- 2 E2 R1 AU- 0 CH 36 US- 36, W+ 51 E36 CH 03 US- 3 E3 AU- 1 CH 37 US- 37, W+ 52 E37 You can add in the new channel in the TV CH 04 US- 4 E4 R2 AU- 2 CH 38 US- 38, W+ 53 E38 CH 05 US- 5 E5 R6 AU- 6 CH 39 US- 39, W+ 54 E39 channel list as you like. CH 06 US- 6 E6 R7 AU- 7 CH 40 US- 40, W+ 55 E40 You need to find the “CH/CC” number for the TV CH 07 US- 7 E7
ページ15に含まれる内容の要旨
Additional preparation The illustrations shown in this section are for AV-1404FE only, which are used for explanation purpose. Your TV may not look exactly the same as illustrated. Before connecting Front of the TV • Read the manuals provided with the devices for the proper connection. Camcorder or TV game • Turn off all the devices including the TV. • Note that connecting cables are not supplied. Headphones Rear of the TV VIDEO-1 OUTPUT INPUT VCR (for playing) D
ページ16に含まれる内容の要旨
Specifications TV RF systems B/G, I, D/K Colour systems TV mode: PAL, SECAM VIDEO mode: PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band. Power requirements AC 110 to 240 V, 50/60 Hz External input / output VIDEO-1: VIDEO input, AUDIO input VIDEO-2: VIDEO input, AUDIO input, OUTPUT: VIDEO output, AUDIO output Headphone jack: stereo mini jack (3.5 mm diameter, sou
