ページ1に含まれる内容の要旨
Projection Television Users Guide
For Models:
AV-65WP94
AV-56WP94
Illustration of AV-56WP94 and RM-C12G
Important Note:
In the spaces below, enter the model and serial number of your television (located
at the rear of the television cabinet). Staple your sales receipt or invoice to the
inside cover of this guide. Keep this user’s guide in a convenient place for future
reference. Keep the carton and original packaging for future use.
Model Number:
LCT1468-001B-A
Serial Number:
1003-TN-II-IM
ページ2に含まれる内容の要旨
Important Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: T o reduce the risk of electric shock. Do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shoc
ページ3に含まれる内容の要旨
® As an “ENERGY STAR ” partner, JVC has determined that this product or product model meets the ® “ENERGY STAR ” guidelines for energy efficiency. Important Safeguards CAUTION: Please read and retain for your safety. Electrical energy can perform many useful functions. This TV set has been engineered and manufactured to assure your personal safety. But improper use can result in potential electrical shock or fire hazards. In order not to defeat the safeguards incorporated in this TV
ページ4に含まれる内容の要旨
7 An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTR
ページ5に含まれる内容の要旨
PORTABLE CART WARNING (Symbol provided by RETAC) 13 For added protection of the TV set during a lightning storm or when the TV set is to be left unattended for an extended period of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to product due to lightning storms or power line surges. 14 A TV set and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the TV set and cart combination to overturn.
ページ6に含まれる内容の要旨
Warnings Screen Burn-in By displaying fi xed images for extended periods of time, can leave a subtle but permanent ghost image in your picture. This is referred to as "burn-in". To avoid this, mix your viewing pattern. Examples include, but are not limited to the following: Stock-market report bars For example... Shopping channel logos and pricing displays TV on TV off Video game patterns or scoreboards Bright station logos Internet web sites or other computer-style im
ページ7に含まれる内容の要旨
Table of Contents Quick Setup . . . . . . . . . . . 8 Clock Timers . . . . . . . . . . 57 Set Clock . . . . . . . . . . . . . . . . 57 Unpacking your TV . . . . . . . . . . . . 8 On/Off Timer . . . . . . . . . . . . . . . 58 TV Models . . . . . . . . . . . . . . . . 10 TV Remote Control . . . . . . . . . . . 11 Button Functions . . . . . . . 59 Getting Started . . . . . . . . .
ページ8に含まれる内容の要旨
AA Alkaline AA Alkaline Quick Setup Unpacking your TV Thank you for your purchase of a JVC Color Television. Before you begin setting up your new television, please check to make sure you have all of the following items. In addition to this guide, your television box should include: Two AA Batteries 1 Remote Control 1 Television TV CATV VCR DVD POWER I'ArtPRO ASPECT MULTI SCREEN SPLIT INDEX SELECT SLEEP FREEZE SWAP ML/MTS DISPLAY + INPUT 1 V1 12 3 INPUT 2 V2 45 6 INPUT
ページ9に含まれる内容の要旨
Quick Setup Unpacking your TV DVI-D Single Link AV CompuLink Cable 19-pin Cable Used to connect JVC AV CompuLink capable components for an Used to connect high bandwidth automated home theater. digital content protection DTV decoders, DVD players and D-VHS players Optical Audio Cable i.LINK Cable Used to connect an amplifer that Used to connect an i.LINK has an optical digital input terminal. compatable device to your TV. We recommend that before you start using
ページ10に含まれる内容の要旨
POWER POWER PULL/OPEN Quick Setup TV Models NOTE: Before you connect your television to another device, please refer to the proper diagrams for your specific TV and remote. These will help assist you in understanding how to connect your television to another device, as well as use the remote to set up your television. Rear Panel Diagram MODELS: AV-65WP94 AV-56WP94 UNPLUG THE POWER CORD FROM AC OUTLET BEFORE REMOVING THE REAR COVER When the rear cover
ページ11に含まれる内容の要旨
Quick Setup TV Remote Control TV CATV VCR DVD POWER ASPECT MULTI SCREEN SPLIT INDEX SELECT SLEEP FREEZE SWAP ML/MTS DISPLAY + INPUT 1 V1 12 3 INPUT 2 V2 45 6 INPUT 3 V3 78 9 RETURN+ INPUT 4 100+ TV V4 0 THEATER VIDEO DIGITAL DIGITAL-IN PRO STATUS CH DCS D-IN iLINK/TIMER – SUB CHANNEL + LIGHT – + MUTING EPG CH VOL VOL OK CH MENU BACK VCR CHANNEL VCR / DVD PREV NEXT POWER TV / VCR REW PLAY FF REC STOP PAUSE OPEN CLOSE STILL PAUSE RM-C12G RM-C12G MODELS: AV-65WP94 AV-
ページ12に含まれる内容の要旨
Quick Setup Getting Started Getting Started These quick setup pages will provide you, in three easy steps, with the basic information you need to begin using your new television right away. If you have questions, or for more detailed information on any of these steps, please consult other sections of this manual. Step 1 – The Remote Control Before you can operate your remote control, you first need to install the batteries (included). Slide the cover on the
ページ13に含まれる内容の要旨
Quick Setup Connections Basic Operation POWER T Turn the television on and off by pressing the POWER button at the top right corner of the remote. If this is the first time you are turning on the TV, the interactive plug- in menu appears. TV CATV Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if you need to operate a cable box. MUL Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to DVD to control a DVD play
ページ14に含まれる内容の要旨
Quick Setup Connections Cable or Antenna Diagram #1 Output Coaxial Cable 75 Ω (VHF / UHF) OR OUT IN TV Rear Panel Cable Box ATSC Antenna Connection Cable or Antenna Output ATSC IN Coaxial Cable TV Rear Panel Notes: If you do not have a cable box, connect the cable wire from the wall outlet into the back of the TV. If you want to connect both an NTSC and ATSC antenna or cable, use a two way splitter. 14 AV-56\65WP941 English 14 10/17/03, 1:02:51
ページ15に含まれる内容の要旨
IN OUT OUT Quick Setup Connections Diagram #2 VIDEO ATSC OUTPUT AUDIO Cable or Antenna Output R L S VIDEO OVER VIDEO INPUT 3 TV Rear Panel INPUT 2 L Coaxial AUDIO R Cable INPUT 1 OVER AV COMPULINK 75 Ω (VHF / UHF) Two-Way Splitter OR VCR IN IN OUT R L V OUT OUT IN Cable Box Recording a broadcast from ATSC connection TV Rear Panel VCR AUDIO VIDEO ATSC OUTPUT R L S VIDEO V L R IN OVER VIDEO IN INPUT 3
ページ16に含まれる内容の要旨
Quick Setup Connections Notes: Green, blue and red are the most common colors for DVD cables. Some models may vary colors. Please consult the user’s manual for your DVD player for more information. Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete one set of connections (DVD or audio output) before starting the other to avoid accidentally switching the cables. Y ou may also connect the DVD player to Inpu
ページ17に含まれる内容の要旨
Quick Setup Connections Connecting to JVC AV Compu Link JVC’s AV CompuLink feature makes playing video tapes or DVDs totally automatic. Simply insert a pre-recorded tape into your JVC brand VCR or DVD into your JVC DVD player and the device will automatically turn on and begin playback. At the same time, using the AV CompuLink, the VCR or DVD player sends a signal to the television telling it to turn on and switch to the proper video input. The AV Compu
ページ18に含まれる内容の要旨
Quick Setup Connections Connecting to a Camcorder You may connect a camcorder, game console or other equipment to your television by using the front input jacks (Input 4) located under the front panel door. To access, pull on the door to open it. You can also connect these using the television’s rear input jacks, using the same instructions. SUPER MENU – CHANNEL + – VOLUME + FOCUS OPERATE INPUT-4 AUDIO S-VIDEO VIDEO L / MONO R OVER CAMCORDER - OR - 1) Con
ページ19に含まれる内容の要旨
Quick Setup Connections Connecting to an External Amplifier Subwoofer Out - Use a powered subwoofer with the surround feature to simulate a home theater system. Simply connect the subwoofer to the back of the TV. TV Rear Panel SUBWOOFER AUDIO OUT Speaker OUT R L Speaker Powered Subwoofer Amplifier 1) Connect a white cable from the LEFT AUDIO OUTPUT on the back of the TV to the LEFT AUDIO INPUT on the amplifier. 2) Connect a red cable from the RIGHT AUDIO
ページ20に含まれる内容の要旨
Quick Setup Connections Connecting to a Digital TV Receiver w/HDCP By inputting a high bandwidth digital content protection high definition picture source to the digital-in terminal of this television, high-definition pictures can be displayed on the screen in their digital form. (This terminal is for use in the future when high bandwidth digital content protection DTV decoders and DVD players and D-VHS are put on the market.) DTV Decoder AUDIO OUT LR DIGIT
