ページ1に含まれる内容の要旨
AV-32WFT1EK/AV-28WFT1EK
AV32EK_cover.fm Page 1 Sunday, February 13, 2000 12:21 AM
Model
AV-32WFT1EK* AV-28WFT1EK*
Item
Broadcasting systems CCIR I
Colour systems PAL
• The EXT terminals also support the NTSC 3.58/4.43 MHz system.
COLOUR TELEVISION
Channels and frequencies E21-E69
Sound-multiplex systems NICAM (I) system
Teletext systems FLOF (Fastext), WST (World Standard System)
AV-32WFT1EK
Power requirements 220 - 2
ページ2に含まれる内容の要旨
AV32EK_WARNING.fm Page 2 Sunday, February 13, 2000 12:22 AM Thank you for buying this colour television. To make sure your fully understand how to use your new TV, please read this manual thoroughly before you begin.
■■■■ ■■■■ TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EX- DO NOT cut off the mains plug from this
ページ3に含まれる内容の要旨
AV32EK_WARNING.fm Page 3 Sunday, February 13, 2000 12:22 AM ■■■■
This equipment has been designed and manufactured to comply with international safety standards. However, as with any elec- trical appliance, care must be taken to ensure optimal results and operational safety. • Before attempting to use this equipment, read the operating i
ページ4に含まれる内容の要旨
WFT1EK_E1.fm Page 4 Sunday, February 13, 2000 12:23 AM ■■
■■
→ → → If connecting a VCR, follow A B C D. AC Outlet → If not connecting a VCR, follow 1 2. (AC 220 - 240 V, 50 Hz) *1: To operate T-V LINK functions, a T-V LINK compatible VCR must be connected to the EXT-2 terminal on the TV. UHF Aerial
ページ5に含まれる内容の要旨
WFT1EK_E1.fm Page 5 Sunday, February 13, 2000 12:23 AM PREPARATION ■■■■
When the TV is first turned on, it enters the initial setting mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to make the initial settings. 1 Press the Main power button on the TV. The Power lamp lights red (for power on), then green (for TV on) and the JVC logo is displayed. Note: • If the power lamp stays r
ページ6に含まれる内容の要旨
WFT1EK_E1.fm Page 6 Wednesday, February 16, 2000 6:27 PM PREPARATION 4 Press the button to start the AUTO Note: PROGRAM function. • BBC1, BBC2, ITV, CHANNEL4 and CHANNEL 5 are The AUTO PROGRAM menu appears and received TV automatically set to the Programme numbers PR 1 to channels are automatically registered in the Programme PR 5. SKY 1 is set to the Programme number PR 6, numbers (PR). but no TV channel name (ID) be set. If the TV doesn’t receive one of these TV channels, that Program
ページ7に含まれる内容の要旨
WFT1EK_E1.fm Page 7 Sunday, February 13, 2000 12:23 AM
When a T-V LINK compatible VCR is connected to the EXT- 2 Terminal on the TV, it is easier to set up the VCR and to Note: view videos. T-V LINK uses the following features: • Operation via the TV is not possible. • Generally, the VCR cannot record a TV channel that can- To use T-V LINK functions: not be received properly by the VCR’s tuner, even th
ページ8に含まれる内容の要旨
F.T/L WFT1EK_E1.fm Page 8 Sunday, February 13, 2000 12:23 AM ■■
■■
Press the Main power button on the TV. The Power lamp lights red and your TV is in the standby mode. Note: • If the Power lamp lights green, the TV is already on. To turn the Main power off: Press the Main power button again. The Power lamp goes off. Not
ページ9に含まれる内容の要旨
WFT1EK_E1.fm Page 9 Sunday, February 13, 2000 12:23 AM BASIC OPERATION Use the buttons: 2 Press the and buttons to choose a Press the buttons to choose an EXT terminal Programme number (PR). Then press the button. Use the PR LIST: 1 Press the (Information) button to Note: display the PR LIST. • For Programme numbers (PR) with the CHILD 2 Press the and buttons to choose an LOCK function set, the (CHILD LOCK) mark is EXT terminal
ページ10に含まれる内容の要旨
WFT1EK_E1.fm Page 10 Sunday, February 13, 2000 12:23 AM BASIC OPERATION ■■■■
" " "" 1 Press the P buttons to turn the TV on from standby mode. 2 Press the P buttons to choose a Programme number (PR) or an EXT ter- minal. (Behind the front cover) 3 Press the (Volume) button and the buttons to adjust t
ページ11に含まれる内容の要旨
WFT1EK_E1.fm Page 11 Sunday, February 13, 2000 12:23 AM
1
You can turn the volume off instantly. Press the (Muting) button to turn off the Volume. Pressing the (Muting) button again resumes the previous Volume level. 1 2
ページ12に含まれる内容の要旨
WFT1EK_E1.fm Page 12 Tuesday, February 15, 2000 8:13 PM REMOTE CONTROL BUTTONS AND FUNCTIONS PANORAMIC: 2 Press the buttons to choose a ZOOM mode. Then press the button. This mode stretches the left and right sides of a normal pic- ture (4:3 Aspect Ratio) to fill the screen, without making the The picture expands and the chosen ZOOM mode is dis- picture appear unnatural. played in about 5 seconds. Note: • You can pre-set a ZOOM mode for the normal pic- ture. See “4:3 AUTO ASPECT”
ページ13に含まれる内容の要旨
WFT1EK_E1.fm Page 13 Sunday, February 13, 2000 12:23 AM REMOTE CONTROL BUTTONS AND FUNCTIONS 50 0
00
#
## # " " " "
8 , , , , " "
" "
3 3 33
You can display the PR LIST or the Current Time on the Press the (Standby) button to turn the TV screen. on or off. Press the (Information) button. When the TV is turned on, the power lamp chang
ページ14に含まれる内容の要旨
WFT1EK_E1.fm Page 14 Sunday, February 13, 2000 12:23 AM REMOTE CONTROL BUTTONS AND FUNCTIONS ■■■■ ~ ' '' '
3 Press and hold down button. " " " " % %% % $ $ $ $ " " " "
You can view two types of teletext broad
ページ15に含まれる内容の要旨
WFT1EK_E1.fm Page 15 Sunday, February 13, 2000 12:23 AM REMOTE CONTROL BUTTONS AND FUNCTIONS + + + + " " "! "!!! Some teletext pages include hidden text (such as answers to a quiz). You can display the hidden text. Each time you press the button, text is hid- den or revealed. , , , , 8 88 8 You can double the height of the teletext display. Press the button. 0
0
9 9 00
99 You can return to the index page instantly. Press button. FLOF (Fa
ページ16に含まれる内容の要旨
WFT1EK_E2.fm Page 16 Tuesday, February 15, 2000 9:06 PM This TV has a number of functions you can operate using menus. To fully utilize all your TV’s functions, you need to un- derstand the basic menu operating techniques fully. 1 Press the button to display the MENU (main menu). The MENU (main menu) appears. In it, the titles of the menus are displayed. 2 Press the buttons to choose a menu title, and press the butt
ページ17に含まれる内容の要旨
WFT1EK_E2.fm Page 17 Sunday, February 13, 2000 12:24 AM
Note: • You can change the HUE setting (picture hue) only when the colour system is NTSC 3.58 or NTSC 4.43. To return to the default settings in each TINT mode: Press the blue button. Returns the picture settings in the currently chosen TINT mode to the default settings, and stores them in the TINT To display the PICTURE SETTING menu: mode again. 1 Press the button
ページ18に含まれる内容の要旨
WFT1EK_E2.fm Page 18 Sunday, February 13, 2000 12:24 AM
2 Press the buttons to choose the ap- propriate colour system. PAL: PAL system NTSC 3.58: NTSC 3.58 MHz system NTSC 4.43 NTSC 4.43 MHz system AUTO: To display the PICTURE FEATURES menu: This function detects a colour system from the input sig- 1 Press the button to display MENU nal. Only when you are viewing a picture from Pro- (main menu). gramme number PR 0
ページ19に含まれる内容の要旨
WFT1EK_E2.fm Page 19 Sunday, February 13, 2000 12:24 AM PI P P PIC IICT C CTU T TUR U URE R RE E F E FE F FEA E EAT A AT TU TUR U URE R RES E ES S S ■■■■ There are cases where the Earth’s magnetic force may make the picture tilt. If this happens, you can correct the picture tilt. 1 Press the buttons to choose PICTURE TILT. Then press the button. The Sub-menu of the PICTURE TILT function appears. 2 Press the button
ページ20に含まれる内容の要旨
WFT1EK_E2.fm Page 20 Sunday, February 13, 2000 12:24 AM
■■ # # ■■ # # You can turn off the sound from the TV speakers; but you should only do this if an audio system is connected to the TV as a substitute for the TV speakers. When you are using this function, see “Setting the SPEAKER function” on page 31. When a sound is not issued from the TV speaker: If the SPEAKER function is set to OFF, th
