ページ1に含まれる内容の要旨
Contents
Safety precautions 2
COLOUR TELEVISION
Preparation 3
......
1 Confirm which remote control you have 3
INSTRUCTIONS
.....................................
2 Inserting the batteries 3
...
3 Connecting the aerial and external devices 4
Thank you for buying this JVC
4 Connecting the power cord ........................ 6
colour television.
..............................................
5 SETUP TOUR 6
To make sure you understand how to
Basic operation 7
use your new TV, please read this
Remote
ページ2に含まれる内容の要旨
Safety precautions WARNING •To prevent fire or shock hazard, do not expose the TV to rain or moisture. CAUTION •Operate only from the power source indicated on the rear of the TV. •Avoid damaging the power cord and mains plug. When you unplug the TV, pull it out by the mains plug. Do not pull on the power cord. •Never block or cover the cabinet openings for ventilation. Never install the TV where good 15 cm ventilation is unattainable. When installing this TV, leave spaces for ventilation around
ページ3に含まれる内容の要旨
Preparation 1 Confirm which remote control you have Your TV comes with one of the two remote controls shown below. Functions you can operate differ depending on the type of remote control. RM-C91 RM-C360GY POWER POWER SYSTEM PICTURE SYSTEM COLOUR SOUND MODE COLOUR SOUND MUTING TV/VIDEO 12 3 DISPLAY TV/TEXT 45 6 MENU OFF TIMER 78 9 CHANNEL RETURN+ - -- SCAN 0 / TV/VIDEO DISPLAY MUTING 123 OFF TIMER 456 MENU PICTURE MODE 789 CHANNEL RETURN+ SCAN CHANNEL VOLUME 0 -/-- CHANNEL VOLUME REMOTE CONTRO
ページ4に含まれる内容の要旨
Preparation 3 Connecting the aerial and external devices •For further details, refer to the manuals provided with the devices you are connecting. • Connecting cables are not supplied. • The front and rear AUDIO/VIDEO input jacks are directly connected so that input to either jack is output through both. You cannot provide input to both the front and rear jacks at the same time. Disconnect one input, or use one of the jacks as an output jack only (for monitoring or recording). ■ Connecting the ae
ページ5に含まれる内容の要旨
Preparation ■ Connecting other external devices To audio To video output output VIDEO AUDIO VCR (for playing) IN OUT VCR (for recording) To audio To video input input To video Camcorder output or To audio TV game output IN VIDEO AUDIO 5 LCT1385-001A 5 5/10/03, 12:21 PM Black
ページ6に含まれる内容の要旨
Preparation 4 Connecting the power cord Connect the power cord to the AC outlet. Operate only from the power source indicated on the rear of the TV. 5 SETUP TOUR When the TV is first turned on it enters the SETUP TOUR mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to perform the SETUP TOUR. •In case of resetting that the reason for such as removal, you can set the SETUP TOUR function on the “MENU 3” menu. For details, see page 15. 1 Press the Main power but
ページ7に含まれる内容の要旨
Basic operation 1 Press the POWER button to turn • The illustration below is for the remote your TV on. control RM-C91. Your remote control may not look exactly like the illustrations. • If your TV does not turn on, press the Main power button on the TV then press the POWER button again. •You can also turn on your TV by pressing any of the following buttons; POWER - the CHANNEL m button SYSTEM COLOUR SOUND MUTING - the Number buttons - the TV/VIDEO button DISPLAY TV/TEXT 2 Select a channel. ME
ページ8に含まれる内容の要旨
Remote control buttons and functions PICTURE MODE button SOUND SYSTEM button You can select one of three picture If the sound is not clear even when the adjustment settings as you like. picture appears normal, change the current sound system to another sound Press this button to select a mode. system. BRIGHT: Press this button to select the sound Heightens contrast and sharpness. system. STANDARD: B/G I D/K M Standardizes picture adjustments. •For the sound systems in each country or SOFT: regio
ページ9に含まれる内容の要旨
Remote control buttons and functions DISPLAY button CHANNEL SCAN button You can continuously display the current You can quickly view all TV channels channel number or VIDEO mode on the programmes that you can view on your screen. TV, and search for the programme you want to view. Press this button. To turn the display off, press this button 1 Press this button to start scanning again. TV channels. The TV channel programmes are each • When selecting a channel or VIDEO mode displayed for several
ページ10に含まれる内容の要旨
Viewing teletext programmes ■ Basic operation 1 Select a TV channel with a teletext programme. POWER 2 Press TV/TEXT button to change SYSTEM the TV mode to the teletext COLOUR SOUND MUTING mode. DISPLAY TV/TEXT 1 TV mode TEXT mode (TEXT only) MENU TV/VIDEO 3 Select a teletext page by 123 pressing the CHANNEL –/+ OFF TIMER button, number buttons or 456 PICTURE coloured buttons. MODE 789 To return to the TV mode, press the CHANNEL RETURN+ SCAN TV/VIDEO button or the TV/TEXT
ページ11に含まれる内容の要旨
Viewing teletext programmes REVEAL INDEX Some teletext pages include hidden text You can return to the index page instantly. (such as answers to a quiz). Press the INDEX button. You can display the hidden text. Returns to teletext page 100 or a page Each time you press the REVEAL which has been specified. button, text is hidden or revealed. SUBPAGE HOLD Some teletext pages include sub-pages You can hold a teletext page on the screen that are automatically displayed. for as long as you want, even
ページ12に含まれる内容の要旨
Using the TV’s menus This TV has a number of functions you can operate using the menus. To use all your TV’s functions fully, you need to understand how to use the menus. / 4 Press the MENU buttons to change function settings. SYSTEM COLOUR SOUND MUTING DISPLAY DISPLAY TV/TEXT Example: Changes the AUTO button MENU / SHUTOFF setting. MENU buttons / MENU MENU 2 buttons MENU 2 AUTO SHUTOFF OFF AUTO SHUTOFF ON TV/VIDEO CHILD LOCK OFF C
ページ13に含まれる内容の要旨
Using the TV’s menus When the time set for the ON TIMER ON TIMER function is reached: Your TV will automatically turn on and The TV automatically turns on and the tune into the channel you set after the channel set for the ON TIMER function is period of time you set. displayed. 1 Press MENU T to display the •For safety reasons the TV will automatically “MENU 1” menu, then select turn off if no operations are made within “ON TIMER”. approximately two hours after the TV is turned on with the ON TI
ページ14に含まれる内容の要旨
Using the TV’s menus AUTO SHUTOFF BLUE BACK You can set your TV to turn off if no You can mute the sound and change the signals are received for about 15 minutes picture into a blue screen while no signals or longer after the end of a broadcast. are received by the TV, or when the signals are unstable. 1 Press MENU T to display the “MENU 2” menu, then select “AUTO 1 Press MENU T to display the SHUTOFF”. “MENU 2” menu, then select “BLUE BACK”. MENU 2 AUTO SHUTOFF ON
ページ15に含まれる内容の要旨
Using the TV’s menus Picture Adjustments AUTO CH PRESET You can adjust the picture as you like. You can automatically preset all TV channels that can be received by your TV 1 Press MENU T to display the to channels. “MENU 4” menu. 1 Press MENU T to display the MENU 4 TINT “MENU 3” menu, then select “AUTO COLOUR CH PRESET”. BRIGHT CONT. MENU 3 SHARP AUTO CH PRESET SELECT BY EXIT BY MANUAL CH PRESET OPERATE BY -+ DISPLAY SETUP TOUR LANGUAG
ページ16に含まれる内容の要旨
Using the TV’s menus MANUAL CH PRESET You can manually preset desired TV If the picture is not clear: channels to desired channels. Fine-tune the TV channel. 1 Press MENU T to display the 1 Press MENU t to select “FINE”. “MENU 3” menu, then select MANUAL “MANUAL CH PRESET”. FINE SKIP NO SOUND SYSTEM B/G MENU 3 EXIT AUTO CH PRESET MANUAL CH PRESET SELECT BY PR 3 VL SETUP TOUR PROGRAM BY -+ EXIT BY LANGUAGE ENGLISH FIN
ページ17に含まれる内容の要旨
Using the TV’s menus SKIP LANGUAGE You can set undesired channels to be You can select the language for the on- skipped. Channels set to be skipped screen display. cannot be selected by the CHANNEL m 1 Press MENU T to display the buttons nor the CHANNEL SCAN button. “MENU 3” menu, then select • Channels to which TV channels have not “LANGUAGE”. been preset are automatically set to be skipped. MENU 3 AUTO CH PRESET MANUAL CH PRESET 1 Press MENU T to display the SETU
ページ18に含まれる内容の要旨
Using the buttons on the TV 1 MENU buttons • MENU button • MENU m buttons 2 CHANNEL m buttons CH PRESET CH ON TIMER POWER 3 VOLUME m buttons 4 ON TIMER lamp The light is switched on while ON TIMER function is operating. 5 POWER lamp 12 3 45 6 When the Main power is on, the light is red. 6 Main power button Basic operation Operating menus • Check to make sure the CHILD LOCK You can operate functions in menus using function is set to “OFF”. When the CHILD the front control buttons on the TV. LOCK
ページ19に含まれる内容の要旨
Troubleshooting If there is no picture or the TV does not operate normally, make sure the problem isn’t due to the reasons indicated below. If the problem persists even after taking the measures indicated, please contact a service technician. Cannot turn the TV on Poor picture •Press the Main power button on the TV. •Press the COLOUR SYSTEM button to select another colour system. (see page 8.) • Connect the power cord to the AC outlet. •Adjust the picture settings. (see page 15.) • Set the Pictu
ページ20に含まれる内容の要旨
Specifications TV RF systems B, G, I, D, K, K1, M Colour systems PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band. External input / output INPUT: VIDEO input (RCA), AUDIO input (RCA) OUTPUT: VIDEO output (RCA), AUDIO output (RCA) Teletext system FLOF (Fastext), WST (World Standard Text) Language displayed by teletext English, French, Turkish, Arabic, Farsi Access
