ページ1に含まれる内容の要旨
Color Television Users Guide
For Model:
AV-34WP84
Illustration of AV-34WP84 and RM-C11G
Important Note:
In the spaces below, enter the model and serial number of your television (located
at the rear of the television cabinet). Staple your sales receipt or invoice to the
inside cover of this guide. Keep this user’s guide in a convenient place for future
reference. Keep the carton and original packaging for future use.
Model Number:
LCT1451-001A-A
Serial Number:
0703-AH-II-IM
AV-34WP84 Engli
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
® • As an “ENERGY STAR ” partner, JVC has determined that this product or product model meets the ® “ENERGY STAR ” guidelines for energy efficiency. Important Safeguards CAUTION: Please read and retain for your safety. Electrical energy can perform many useful functions. This TV set has been engineered and manufactured to assure your personal safety. But improper use can result in potential electrical shock or fire hazards. In order not to defeat the safeguards incorporated in this TV
ページ4に含まれる内容の要旨
7 An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTR
ページ5に含まれる内容の要旨
PORTABLE CART WARNING (Symbol provided by RETAC) 13 For added protection of the TV set during a lightning storm or when the TV set is to be left unattended for an extended period of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to product due to lightning storms or power line surges. 14 A TV set and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the TV set and cart combination to overturn.
ページ6に含まれる内容の要旨
Table of Contents Quick Setup . . . . . . . . . . . 7 Sound Adjust . . . . . . . . . 46 Unpacking your TV . . . . . . . . . . . . 7 Sound Settings . . . . . . . . . . . . . 46 TV Model . . . . . . . . . . . . . . . . 8 Adjust Sound Settings . . . . . . . . . 46 TV Remote Control . . . . . . . . . . . 9 MTS (Multi-channel Sound) . . . . . . . 46 Getting Started . . . . . . . . . . . .
ページ7に含まれる内容の要旨
ページ8に含まれる内容の要旨
PULL/OPEN Quick Setup TV Model NOTE: Before you connect your television to another device, please refer to the proper diagrams for your specific TV and remote. These will help assist you in understanding how to connect your television to another device, as well as use the remote to set up your television. Rear Panel Diagram 75Ω ( VHF/UHF ) SPEAKER INPUT 16Ω 20W RMS R AUDIO L VIDEO SUBWOOFER AUDIO OUT DIGITAL IN OUT R L COMPONE
ページ9に含まれる内容の要旨
ページ10に含まれる内容の要旨
Quick Setup Getting Started Getting Started These quick setup pages will provide you, in three easy steps, with the basic information you need to begin using your new television right away. If you have questions, or for more detailed information on any of these steps, please consult other sections of this manual. Step 1 – The Remote Control Before you can operate your remote control, you first need to install the batteries (included). Slide the cover on the
ページ11に含まれる内容の要旨
Quick Setup Connections Basic Operation T Turn the television on and off by pressing the POWER button at the top right corner of the remote. If this is the first time you are turning on the TV, the interactive plug-in menu appears. TV CATV • Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if you need to operate a cable box. • Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to VCR DVD A DVD to control a DVD play
ページ12に含まれる内容の要旨
IN OUT OUT Quick Setup Connections Diagram #1 Cable or Antenna Output Coaxial Cable 75Ω ( VHF/UHF ) OR OUT IN TV Rear Panel Cable Box Note: • If you do not have a cable box, connect the cable wire from the wall outlet into the back of the TV. Diagram #2 Cable or Antenna Output AUDIO VIDEO S VIDEO R L OVER INPUT 3 TV Rear Panel INPUT 2 INPUT 1 75Ω OVER ( VHF/UHF ) Coaxial Cable Two-Way OR Splitter VCR IN IN OUT R L
ページ13に含まれる内容の要旨
Quick Setup Connections Notes: • Green, blue and red are the most common colors for DVD cables. Some models may vary colors. Please consult the user’s manual for your DVD player for more information. • Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete one set of connections (DVD or audio output) before starting the other to avoid accidentally switching the cables. • Y ou may also connect the DVD player to Inpu
ページ14に含まれる内容の要旨
Quick Setup Connections Connecting to JVC AV CompuLink JVC’s AV CompuLink feature makes playing video tapes or DVDs totally automatic. Simply insert a pre-recorded tape into your JVC brand VCR or DVD into your JVC DVD player and the device will automatically turn on and begin playback. At the same time, using the AV CompuLink, the VCR or DVD player sends a signal to the television telling it to turn on and switch to the proper video input. • The
ページ15に含まれる内容の要旨
Quick Setup Connections Connecting to a Camcorder You may connect a camcorder, game console or other equipment to your television by using the front input jacks (Input 4) located under the front panel door. To access, pull on the door to open it. You can also connect these using the television’s rear input jacks, using the same instructions. S–VIDEO AUDIO VIDEO L/ MONO R MENU CHANNEL VOLUME OVER INPUT 4 INPUT 4 – OR– 1) Connect a yellow composit
ページ16に含まれる内容の要旨
Quick Setup Connections Connecting to an External Amplifier Subwoofer Out - Use a powered subwoofer with the surround feature to simulate a home theater system. Simply connect the subwoofer to the back of the TV. TV Rear Panel Speaker Speaker SUBWOOFER AUDIO OUT Powered OUT R L Subwoofer Amplifier 1) Connect a white cable from the LEFT AUDIO OUTPUT on the back of the TV to the LEFT AUDIO INPUT on the amplifier. 2) Connect a red cable from t
ページ17に含まれる内容の要旨
Quick Setup Connections Connecting to a Digital TV Receiver w/HDCP By inputting a high bandwidth digital content protection high definition picture source to the digital-in terminal of this television, high-definition pictures can be displayed on the screen in their digital form. (This terminal is for use in the future when high bandwidth digital content protection DTV decoders and DVD players and D-VHS are put on the market.) DTV Decoder AUDIO OUT LR DIGIT
ページ18に含まれる内容の要旨
ページ19に含まれる内容の要旨
Quick Setup Plug-In Menu Step 3 – The Interactive Plug In Menu When you turn your television on for the first time the interactive plug-in menu will appear. The plug-in menu helps you to get your TV ready to use by letting you set your preferences for: • The language in which you want the onscreen menus to appear. • Setting the TV’s clock to the correct time so your timer functions will work properly. You can choose “AUTO” or “MANUAL” for setting the clo
ページ20に含まれる内容の要旨
Quick Setup Plug-In Menu Auto Clock Set Before you use any of your TV’s timer functions, you must first set the clock. You may precisely set your clock using the XDS time signal broadcast by most public broadcasting stations. If you do not have this in your area, you will have to set the clock manually. See manual clock set below. To set the clock using the XDS signal: √® To choose AUTO SET CLOCK † To TIME ZONE √® To select your time zone: (Atlantic, East
