ページ1に含まれる内容の要旨
EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS
OF EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, U.S.A.
EWFG2705
TO RECEIVE DIGITAL SIGNAL
YOU MUST CONNECT ANTENNA
If you need additional operating assistance after reading this owner's manual or to order
replacement accessories, please call TOLL FREE : 1-800-605-8453 or visit our
WEB SITE at http://www.EmersonAudioVideo.com.
ページ2に含まれる内容の要旨
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI- ANCE TO RAIN OR MOISTURE. THIS SYMBOL INDICATES THAT DANGER- CAUTION OUS VOLTAGE CONSTITUTING A RISK OF RISK OF ELECTRIC SHOCK ELECTRIC SHOCK IS PRESENT WITHIN DO NOT OPEN THIS UNIT. CAUTION: TO REDUCE THE RISK OF ELEC- THIS SYMBOL INDICATES THAT THERE TRIC SHOCK, DO NOT REMOVE COVER (OR BACK) ARE IMPORTANT OPERATING AND MAIN- NO USER SERVICEABLE PARTS INSIDE. REFER TENANCE INSTRUCTIONS IN THE LITERA- SERVICING TO Q
ページ3に含まれる内容の要旨
FIGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS NEC - NATIONAL ELECTRICAL CODE POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) S2898A 13.Outdoor Antenna grounding-If an outside antenna or cable 19.Damage Requiring Service-Unplug this TV from the wall system is connected to the TV, be sure the antenna
ページ4に含まれる内容の要旨
SUPPLIED ACCESSORIES • Owner’s Manual • Remote control unit • Batteries (1EMN20731) (NE601UD) (“AA” x 2) • If you need to replace these accessories, please refer to the PART NO, under the illustrations and call our help line mentioned on the front page. • Depending on your antenna system, you may need different types of Combiners (Mixer) or Separator (Splitter). Contact your local electronics store for these items. PRECAUTIONS • Place your TV in a room with adequate ventilation. • Keep your TV s
ページ5に含まれる内容の要旨
FEATURES • DTV/TV/CATV This TV lets you easily switch TV(NTSC) and DTV(ATSC) with the remote control. This feature enables you to simply view from conventional analog TV to Standard Definition TV, High Definition TV. You can also con- nect this TV to CATV if you have a CATV box. • Program Information Display (DTV) You can display the title, contents and other information of the current DTV program on the screen. • Auto Preset Channel This TV can automatically scan and memorize the channels recei
ページ6に含まれる内容の要旨
ONTENTS C IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SUPPLIED ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 FEATURES . . . . . . . . . . . . . . . . . . . .
ページ7に含まれる内容の要旨
REPARATION FOR USE P CONNECTION This section describes how to connect this TV to reception and other sources. MAKE SURE YOU HAVE AN ANTENNA As DTV is only available over the air, you need an antenna to receive digital signal. [ANTENNA / BASIC CABLE CONNECTION] When connecting TV to antenna *For digital signal 1) Connect the RF cable or antenna cable on your home outlet to the ANT. IN jack of this TV. Aerial Cable TV antenna or signal * CABLES NOT INCLUDED (if necessary) * COMMERCIALLY AVAILABLE
ページ8に含まれる内容の要旨
[CONNECTION TO CABLE/SATELLITE BOX] 1) Connect the antenna cable on your home outlet to the input jack of the CABLE/SATELLITE box. 2) Use the corresponding cable to connect the ANT. IN jack of this TV and the output jack of the CABLE/SATELLITE box. *Required cables in 2) and connecting methods differ depending on the CABLE/SATELLITE box. For more information, please contact the store where you purchased the CABLE/SATELLITE box or nearby electric appliance stores. Satellite Cable TV antenna or si
ページ9に含まれる内容の要旨
[EXTERNAL CONNECTION] When using the Audio/Video cables 1) This is the general method to connect this TV to video devices with the video or audio output jacks, such as VCR etc. When the audio jack of video devices is monaural, connect this TV to the AUDIO L jack. AUDIO VIDEO S VIDEO OUT OUT OUT CABLES NOT INCLUDED When using the S-video cable 1) This is how to connect this TV to the video devices with the S-video output jack. You can expect better pic- ture quality than the normal video cable co
ページ10に含まれる内容の要旨
[USING FRONT A/V CONNECTION] 1) This is how to use the A/V jack in front of this TV and connect to external devices. This is useful when you use game playing devices etc. When the audio jack of external devices is monaural, connect this TV to the AUDIO L jack. [DIGITAL AUDIO CONNECTION] 1) If you connect this TV to the digital-supported audio devices, you can enjoy much more of the digital broadcasting programs with the feeling of being at a live program. Use the DIGITAL AUDIO COAXIAL cable (com
ページ11に含まれる内容の要旨
INSTALLING THE BATTERIES Install two AA batteries (supplied) matching the 1 2 3 polarity indicated inside battery compartment of the remote control. [BATTERY PRECAUTIONS] • Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device. • Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries with fresh ones. • If the device is not to be used for a long period of time, remove the batteri
ページ12に含まれる内容の要旨
UNCTIONS F REMOTE CONTROL AND FRONT PANEL FUNCTION AUDIO button (p17) • Analog mode (TV) DTV TV POWER / To select audio mode POWER button • Digital mode (DTV) To turn TV on/off AUDIO INFO To select audio language Channel number buttons (p16) 1 2 3 DTV/TV button (p16) -/ENT button (p16) 4 5 6 To switch between digital mode (DTV) To confirm the command of and analog mode 7 8 9 channel number buttons CHANNEL –/ENT RETURN 0 +100 INFO button (p18) K K L L CH(ANNEL) / buttons (p13) • Analog mode (TV)
ページ13に含まれる内容の要旨
PERATIONS O INITIAL AUTO PRESET 1 Set the D.S.T. (Daylight Saving Time) This section describes the initial settings when you When you first turn on the power, the following first turn on the power after purchase. The initial screen is displayed. setting items are shown below. 1. PLEASE CONNECT ANTENNA TO THE UNIT. NOTE: 2. SET UP THE ITEMS WITH , AND BUTTONS. Be sure that antenna or cable is connected properly before plugging the power cord. D.S.T. (Daylight Saving) [- -
ページ14に含まれる内容の要旨
3 Set the AUTO PRESET CH. MENU SCREEN NOTES: This section describes the overview of the MENU • If "D.S.T. (Daylight Saving)" and "TIME ZONE" is not set, screen displayed when you press [MENU].For you cannot select "AUTO PRESET CH". more details, see the reference page for each item. • Make sure if the TV is connected to antenna or cable. When antenna is connected, select “AUTO PRESET CH The MENU screen consists of the function setting (TV/DTV)” at the procedure below. When connected to items bel
ページ15に含まれる内容の要旨
LANGUAGE SELECTION You can change the language used on the MENU screen. ENGLISH, SPANISH or FRENCH can be selected. How to change the language in the MENU screen is shown below. 4 5 6 7 8 9 CHANNEL – /ENT RETURN +100 0 K L CH / CH VOL VOL CH X Y VOL / MENU INPUT MENU SLEEP MUTE SELECT 1 Display the MENU screen. • Press [MENU] on the remote control. The following MENU screen is displayed. PICTURE CHANNEL SET [ENG]/ESP/FRA V-CHIP SET UP CAPTION [OFF] DTV SET UP 2 Select "ENG/ESP/FRA". K L • Usin
ページ16に含まれる内容の要旨
ATCHING TV W SWITCHING ANALOG MODE / DIGITAL MODE CHANNEL SELECTION K L You can easily switch the TV (NTSC) and DTV You can select the channel by using either [CH / ] (ATSC) with the remote control and enjoy viewing the or Channel number buttons. How to select the High Definition TV programs as well as the Standard channel in each way is shown below. AUDIO INFO Definition TV programs with simple operation. 1 2 3 Channel 4 5 6 number DTV TV POWER / buttons 7 8 9 CHANNEL DTV/ TV –/ENT RETURN AUDIO
ページ17に含まれる内容の要旨
VOLUME ADJUSTMENT SWITCHING AUDIO This section describes how to adjust the volume This section describes how to switch the audio in when viewing TV. The MUTE function, which is use- the analog mode and how to switch the audio lan- ful when you have a visitor or a phone call, will be guage in the digital mode. also described. 1 2 3 DTV TV POWER / 4 5 6 AUDIO INFO 7 8 9 CHANNEL –/ENT RETURN AUDIO 0 +100 1 2 3 CH 4 5 6 VOL VOL CH 7 8 9 X Y VOL / TV INPUT MENU SLEEP MUTE SELECT MUTE 1 Switch the aud
ページ18に含まれる内容の要旨
DTV SCREEN INFORMATION In the digital mode, the detailed information for the You can display the currently selected channel currently selected channel such as the program number or other information such as the audio guide is displayed. mode on the screen for checking. 1 Display the detailed information for the channel. • Every time you press [INFO], the display mode DTV TV POWER / will be switched as below. AUDIO INFO INFO 1 2 3 4 5 6 7 8 9 CHANNEL – /ENT RETURN +100 0 CH VOL VOL CH • The follo
ページ19に含まれる内容の要旨
DTV 3 Select the display mode. X Y • Every time you press [VOL / ] on the remote CHANGING THE SCREEN DISPLAY MODE control, [LETTERBOX] and [ZOOM] will be switched alternately. 2 types of display mode can be selected in the digital mode. D10-0 D10-0 You can select your favorite display mode and enjoy the program. 1 2 3 4 5 6 LETTERBOX ZOOM 7 8 9 CHANNEL –/ENT RETURN [LETTERBOX] 0 +100 K L CH / Display the digital-supported program in full- CH VOL VOL CH screen. X Y VOL / Black borders will spread
ページ20に含まれる内容の要旨
PTIONAL SETTINGS O 3 Adjust the picture quality. PICTURE ADJUSTMENT K L • Using [CH / ] on the remote control, select You can adjust the brightness, contrast, color, tint the picture quality item you want to adjust. and sharpness of the picture. 1 2 3 4 5 6 7 8 9 CHANNEL –/ENT RETURN 0 +100 K L CH / CH VOL VOL CH X Y VOL / MENU INPUT MENU SLEEP MUTE SELECT BRIGHT 1 Display the MENU screen. K :To increase brightness • Press [MENU] on the remote control. L :To decrease brightness The following MEN
