ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
CONTENTS CONTENTS 1 IMPORTANT SAFETY INSTRUCTIONS (CONTINUED) 3-5 POWER SOURCE 5 LOCATION OF CONTROLS 6 REMOTE CONTROL 7 CABLE(CATV) / SATELLITE CONNECTIONS 8 EXTERNAL AUDIO/VIDEO CONNECTIONS 9 ANTENNA CONNECTIONS 10 VCR CONNECTIONS 11 SETTING THE TV MENUS 12-24 TROUBLESHOOTING GUIDE 25 RECEPTION DISTURBANCES 26 LIMITED WARRANTY 27 SPECIFICATIONS 28 1
ページ3に含まれる内容の要旨
Thank you for purchasing the Dora the Explorer 13” Color TV with Remote Control from Emerson Radio Corp. Please read this manual before operating this unit to become familiar with its features and obtain the performance that will bring you continued enjoyment for many years. In the event you require technical assistance, please call the Emerson service Department at: 800-898-9020. For future reference, record the serial number in the space provided. Serial Number_________________________________
ページ4に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED) CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shoc
ページ5に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED) 9. VENTILATION Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat source. This product should not be placed in a built
ページ6に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED) 22.DAMAGE REQUIRING SERVICE Unplug the product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled or objects have fallen into the product. c. If the product has been exposed to rain or water. d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by t
ページ7に含まれる内容の要旨
POWER LOCATION OF CONTROLS FRONT 1. SPEAKER 2. VOLUME DOWN ( )/UP ( ) Buttons- Use these buttons to change your TV’s volume, to activate selections in the menu system, or to change audio and video settings. 3. MENU Button-Use this button to turn the TV’s menu system on and off. 4. TV/AV Button VOLUME MENU TV/AV CHANNEL AUDIO IN 5. CHANNEL DOWN ( )/UP ( ) Buttons- VIDEO IN Use these buttons to change channels on your TV, or to select items in the menu system. 6. Remote Control Sensor-This receive
ページ8に含まれる内容の要旨
AAA AAA REMOTE CONTROL POWER TV/AV 1 9 1. POWER Button 1 3 2 2. Buttons (For Channels 0-9) 2 4 6 5 7 9 3. Display Button 8 DISPLAY 0 4. Channel Up ( ) and Down ( ) Button 3 CH 4 MUTE SLEEP 5. Mute Button 5 10 6 VOL VOL 6. Menu Button MENU 7 7 7. Volume Up ( ) and Down ( ) Button 8 11 8. V-Chip Button CH V-CHIP CCD 4 9. TV/AV Button 10. Sleep Button 11. CCD Button BATTERY INSTALLATION 1 2 3 Loosen the screw to open Install two (2) “AAA” Screwed the battery the battery compartment batteries, payin
ページ9に含まれる内容の要旨
CABLE (CATV)/SATELLITE CONNECTIONS This TV has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some cable TV companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company. FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE For basic cable service not requiring a converter/ descrambler box, connect the CATV 75 o
ページ10に含まれる内容の要旨
POWER EXTERNAL AUDIO/VIDEO CONNECTIONS When you watch a program recorded on another source(VCR. video camera, DVD, etc.), you can use the Audio/Video input jacks on the front of the TV (AV2). Connect the Audio/Video output jacks of the external unit to the Audio Input jack and the video Input jack of the TV. To access the unit connected to these jacks, press the AV IN button so AV appears on the screen. To resume normal TV viewing, simply press the AV IN button again. EXTERNAL SOURCE VOLUME MENU
ページ11に含まれる内容の要旨
ANTENNA CONNECTIONS CONNECTING THE ROD ANTENNA (NOT SUPPLIED). Insert the Rod Antenna on top of the rear cabinet and connect other end to the antenna jack as shown below. ROD ANTENNA AND ADAPTOR ARE NOT SUPPLIED. OUTDOOR ANTENNA CONNECTIONS OUT DOOR VHF/UHF ANTENNA CONNECTION(ANTENNA NOT SUPPLIED) Follow the instructions for the type of antenna system you intend to use. If using cable or Satellite, see page 8. Combination VHF/UHF Combination VHF/UHF Antenna(Single 75 ohm cable Antenna(separate V
ページ12に含まれる内容の要旨
VCR CONNECTIONS Follow the instructions below to connect a VCR to your television using a 75 ohm coaxial cable (CABLES NOT INCLUDED). VCR INCOMING CATV CABLE From VCR OUT jack 1. Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the VCR. 2. Connect a 75 ohm coaxial cable from the VCR's 75 ohm OUT jack to the ANT jack on the rear of the TV. 3. Press the AV IN button until regular TV or CATV appears on the TV screen and press PLAY on the VCR to watch a tape. Fo
ページ13に含まれる内容の要旨
2 SETTING THE TV MENUS (CONTINUED) TURN ON THE TV 1 1 1. Press the POWER button to turn your TV On or Standby. SETTING THE TV MENU 2 PICTURE PRESET Settings Standard Channel 01 Brightness 50 Add / Delete Add Contrast 65 Reception CATV Color 50 Auto Search Sharpness 50 Fine Tint 00 AFC On Select Adjust Select Adjust CLOCK FUNCTION Clock --/-- Col. Sys NTSC On time --/-- Language English Offtime --/-- C.Caption Off Attention --/-- Parental Ctrl Off Preset --/-- Channel - - Adjust Adjust Select Sel
ページ14に含まれる内容の要旨
2 2 SETTING THE TV MENUS (CONTINUED) SETTING THE PICTURE MENU 1 PICTURE Settings Standard Brightness 50 Contrast 65 Color 50 Sharpness 50 Tint 00 Adjust Select 2 1. Press the Channel Up or Channel Down button to select Settings, Brightness, Contrast, Color, Sharpness or Tint the item. SETTING THE PICTURE SETTINGS 2 PICTURE Settings Standard Brightness 50 Contrast 65 Color 50 Sharpness 50 Tint 00 Select Adjust 1 2 1. Press the Volume Up or Volume Down button to cyclically select Standard, Nature,
ページ15に含まれる内容の要旨
2 2 2 SETTING THE TV MENUS (CONTINUED) SETTING THE CONTRAST 4 PICTURE Settings Standard Brightness 50 Contrast 65 Color 50 Sharpness 50 Tint 00 Adjust Select 1. Press the Volume Up 1 or Volume Down 2 button to adjust the setting. (0-100) 3 2. Press the MENU button to enter and return Picture setting.) SETTING THE COLOR 5 PICTURE Settings Standard Brightness 50 Contrast 65 Color 50 Sharpness 50 Tint 00 Select Adjust 1 2 1. Press the Volume Up or Volume Down button to adjust the setting. (0-100) 3
ページ16に含まれる内容の要旨
2 SETTING THE TV MENUS (CONTINUED) SETTING THE TINT 7 PICTURE Settings Standard Brightness 50 Contrast 65 Color 50 Sharpness 50 Tint 00 Adjust Select 1 2 1. Press the Volume Up or Volume Down button to adjust the setting. (-50~+50) 3 2. Press the MENU button to enter and return Picture setting. SETTING THE PRESET MENU 1 PRESET Channel 01 Add / Delete Add Reception CATV Auto Search Fine AFC On Adjust Select 1 2 1. Press the Channel Up or Channel Down button to select Channel, Add / Delete Recepti
ページ17に含まれる内容の要旨
2 2 2 SETTING THE TV MENUS (CONTINUED) SETTING THE CHANNEL 2 PRESET Channel 01 Add / Delete Add Reception CATV Auto Search Fine AFC On Adjust Select 1 2 1. Press the Volume Up or Volume Down button to adjust the setting. SETTING THE ADD/DELETE 3 PRESET Channel 01 Add / Delete Add Reception CATV Auto Search Fine AFC On Select Adjust 1. Press the Volume Up 1 or Volume Down 2 button to cyclically select Del. or Add. SETTING THE RECEPTION 4 PRESET Channel 01 Add / Delete Add Reception CATV Auto Sear
ページ18に含まれる内容の要旨
2 2 2 SETTING THE TV MENUS (CONTINUED) SETTING THE AUTO SEARCH 5 PRESET Channel 01 Add / Delete Add Reception CATV Auto Search Fine AFC On Adjust Select 1 2 1. Press the Volume Up or Volume Down button to start Auto Searching and the unit will automatically cycle through all the channels and store active channels into memory. SETTING THE FINE 6 PRESET Channel 01 Add / Delete Add Reception CATV Auto Search Fine AFC On Adjust Select 1 2 1. Press the Volume Up or Volume Down button to adjust the se
ページ19に含まれる内容の要旨
2 2 SETTING THE TV MENUS (CONTINUED) SETTING THE CLOCK MENU 1 CLOCK Clock --/-- Ontime --/-- Offtime --/-- Attention --/-- Preset --/-- Channel - - Adjust Select 1 2 1. Press the Channel Up or Channel Down button to select Clock, On Time, Off Time, Attention, Preset or Channel the item. SETTING THE CLOCK 2 CLOCK Clock --/-- Ontime --/-- Offtime --/-- Attention --/-- Preset --/-- Channel - - Adjust Select 1 2 1. Press the Volume Up button to set the minutes and the Volume Down button to set the h
ページ20に含まれる内容の要旨
2 3 3 2 2 5 SETTING THE TV MENUS (CONTINUED) SETTING THE OFF TIME 4 CLOCK Clock --/-- Ontime --/-- Offtime --/-- Attention --/-- Preset --/-- Channel - - Adjust Select 1 2 1. Press the Volume Up button to set the minutes and the Volume Down button to set the hours. SETTING THE ATTENTION 5 CLOCK Clock --/-- Ontime --/-- Offtime --/-- Attention --/-- Preset --/-- Channel - - Select Adjust 1 2 1. Press the Volume Up button to set the minutes and the Volume Down button to set the hours. Note: This f
