ページ1に含まれる内容の要旨
ORDER NO. KM79911336C3
PARSONAL FACSIMILE
KX-FT21RS
(Russia)
© 1999 Kyushu Matsushita Electric Co., Ltd. All
rights reserved. Unauthorized copying and
distribution is a violation of law.
ページ2に含まれる内容の要旨
KX-FT21RS CONTENTS Page Page 1 INTRODUCTION 3 6.10. EXT. TEL 133 1.1. SAFETYPRECAUTIONS 3 6.11. OPERATION PANEL 135 1.2. INSULATIONRESISTANCETEST 3 6.12. POWER SUPPLY BOARD SECTION 137 1.3. FORSERVICETECHNICIANS 3 7 FORTHESCHEMATICDIAGRAMS 140 1.4. BATTERYCAUTION 3 8 PRINTEDCIRCUITBOARD 141 1.5. ACCAUTION 4 8.1. PRINTEDCIRCUITBOARD(DIGITALBOARD): 1.6. PERSONALSAFETYPRECAUTIONS 5 COMPONENT VIEW 141 1.7. FEATURES 6 8.2. PRINTEDCIRCUITBOARD(DIGITALBOARD):BOTTOM 1.8. SPECIFICATIONS 7 VIEW
ページ3に含まれる内容の要旨
KX-FT21RS 1 INTRODUCTION 1.1. SAFETYPRECAUTIONS 1. Before servicing, unplug the AC power cord to prevent an electric shock. 2. When replacing parts, use only the manufacturer´s recommended components. 3. Check the condition of the power cord. Replace if wear or damage is evident. 4. After servicing, be sure to restore the lead dress, insulation barriers, insulation papers, shields, etc. 5. Before returning the serviced equipment to the customer, be sure to perform the following insulation r
ページ4に含まれる内容の要旨
KX-FT21RS 1.5. ACCAUTION For safety, before closing the lower cabinet, please make sure of the following precautions. 4
ページ5に含まれる内容の要旨
KX-FT21RS 1.6. PERSONALSAFETYPRECAUTIONS 1.6.1. MOVINGSECTIONSOFTHEUNIT Be careful not to let your hair, clothes, fingers, accessories, etc., become caught in any moving sections of the unit. The moving sections of the unit are the rollers and a gear. There is a separation roller and a document feed roller which are rotated by the document feed motor. A gear rotates the two rollers. Be careful not to touch them with your hands, especially when the unit is operating. 1.6.2. LIVEELECTRICAL SECTION
ページ6に含まれる内容の要旨
KX-FT21RS 1.7. FEATURES General · Desktop type · LCD (Liquid Crystal Display) readout · Help function · Copier function Facsimile · Space Saving Compact Design · Resolution: standard/fine/super fine/halftone · Copier Function · Automatic Document Feeder (10 Sheets) · Help Printout · Easy-to-view LCD (15 Characters) Integrated telephone system · Electric Volume Control · On-hook dialing · Redialing function · Temporary tone dialing · Electric telephone
ページ7に含まれる内容の要旨
KX-FT21RS 1.8. SPECIFICATIONS Applicable Lines: Public Switched Telephone Network Document Size: Max. 216 mm (8 1/2”) in width Max. 600 mm (23 5/8”) in length Effective Scanning Width: 208mm (8 3/16”) Recording Paper Size: 216 mm max. 30 m (8 1/2”×98”) roll Effective Printing Width: 208 mm (8 3/16”) Transmission Time*: Approx. 15 s/page (Original mode)** Approx. 30 s/page (G3 Normal mode) Scanning Density: Horizontal: 8 pels/mm (203 pels/inch) Vertical: 3.85 lines/mm (98 lines/inch)—STANDARD mod
ページ8に含まれる内容の要旨
KX-FT21RS 1.10. CCITTNo.1TESTCHART 8
ページ9に含まれる内容の要旨
KX-FT21RS 1.11. LOCATIONOFCONTROLS 1.11.1. OVERVIEW 1.11.2. CONTROL PANEL 9
ページ10に含まれる内容の要旨
KX-FT21RS 1.12. CONNECTIONS NOTE When you operate this products, the power outlet should be near the product and easily accessible. 10
ページ11に含まれる内容の要旨
KX-FT21RS 1.13. INSTALLATION 1.13.1. INSTALLINGTHERECORDING PAPER Open the cover by pressing the cover open button and install the recording paper roll. 1 incorrect correct If the paper is secured with glue or tape, cut Cover open button approximately 15 cm (6 inches) from the beginning. 10 cm Pull the leading edge of the paper approximately 2 10 cm (4 inches) out of the unit. Make sure that there is no slack in the paper roll. Close the cover securely by pushing down on both end
ページ12に含まれる内容の要旨
KX-FT21RS 1.13.3. SETTINGYOURLOGO The logo can be your company, division or name. Press MENU . 1 1 Display: SYSTEM SET UP 2 / Press # , then 0 2 . 2 YOUR LOGO Press START/COPY/SET . 3 LOGO= MENU STOP Enter your logo, up to 30 characters, by using (Delete) 4 the dial keypad. See the next page for details. START/COPY/SET Example: Bill 1. Press 2 twice. LOGO=B Cursor 2. Press 4 six times. LOGO=Bi 3. Press 5 six times. LOGO=Bil 4. Press to mo
ページ13に含まれる内容の要旨
KX-FT21RS 1.13.4. Toselectcharacterswiththedialkeypad Pressing the dial keys will select a character as shown below. 1.13.5. Documentsyoucansend Note: Remove clips, staples or other similar fastening objects. Check that ink, paste or correction fluid has dried. Do not send the following types of documents. Use copies for fax transmission. · Chemically treated paper such as carbon or carbonless duplicating paper · Electrostatically charged paper · Heavily curled, creased or torn paper
ページ14に含まれる内容の要旨
KX-FT21RS 1.14. MAINTENANCEITEMSANDCOMPONENTLOCATIONS 1.14.1. OUTLINE MAINTENANCE AND REPAIRS ARE PERFORMED USING THE FOLLOWING STEPS. 1. Periodic maintenance Inspect the equipment periodically and if necessary, clean any contaminated parts. 2. Check for breakdowns Look for problems and consider how they arose. If the equipment can be still used, perform copying, self testing or communication testing. 3. Check equipment Perform copying, self testing and communication testing to determine if t
ページ15に含まれる内容の要旨
KX-FT21RS 1.14.2.1. MAINTENANCE LIST 1.14.2.2. MAINTENANCE CYCLE 15
ページ16に含まれる内容の要旨
KX-FT21RS 1.14.3. MAINTENANCE 1.14.3.1. CLEANINGTHEDOCUMENTFEEDERUNIT If misfeeding occurs frequently or if dirty patterns or black bands appear on a copied or transmitted document, clean the document feeder. Disconnect the power cord and the telephone Telephone 1 line cord. line code Open the cover by pressing the cover open button. 2 Power cord Clean the document feeder rollers, sub roller and 3 rubber flap with a cloth moistened with isopropyl rubbing alcohol, and let all parts dry thoroughly
ページ17に含まれる内容の要旨
KX-FT21RS 1.14.3.2. CLEANING THE THERMAL HEAD If dirty patterns or black bands appear on a copied or received document, clean the thermal head. Disconnect the power cord and the telephone 1 line cord. Thermal head Open the cover by pressing the cover open button. 2 Clean the thermal head with a cloth moistened with 3 isopropyl rubbing alcohol, and let it dry thoroughly. Close the cover securely by pushing down on both 4 ends. Cover open Connect the power cord and the telephone line button cord.
ページ18に含まれる内容の要旨
KX-FT21RS 2 TROUBLESHOOTINGGUIDE 2.1. TROUBLESHOOTINGSUMMARY 2.1.1. TROUBLESHOOTING After confirming the problem by asking the user, troubleshoot according to the instructions and observe the following precautions. 2.1.2. PRECAUTIONS 1. If there is a problem with the print quality or the paper feed, first check if the installation space and the print paper meets the specifications, the paper selection lever/paper thickness lever is set correctly, and the paper is set correctly without any slack
ページ19に含まれる内容の要旨
KX-FT21RS 2.2. USERRECOVERABLEERRORS If the unit detects a problem, the following messages will appear on the display. Note: The explanations given in the [ ] are for servicemen only. 19
ページ20に含まれる内容の要旨
KX-FT21RS 2.2.1. DocumentJam If the unit does not release the document during feeding, remove the jammed document as follows. Open the cover by pressing the cover open 1 button. Remove the jammed document carefully. 2 Close the cover securely by pushing down 3 on both ends. Note: • Do not pull out the jammed paper forcibly. before opening the cover. Cover open button 20
