ページ1に含まれる内容の要旨
INTEGRATED DIGITAL HD READY COLOUR TELEVISIONS
32WLU530HID
Operating Instructions
ページ2に含まれる内容の要旨
TABLE OF CONTENTS 1 1-Important Information ..........................................................................1 1.1-Cleaning the screen and cabinet... .....................................................................1 1.2-Disposing of your TV at the end of service life... .................................................1 1.3-Superior features of your integrated digital television ..........................................1 1.4-Receiving digital broadcasting channels ................
ページ3に含まれる内容の要旨
1 Important Information LCD panels are produced with state-of-the-art technology. However, there may be missing or lit spots on the screen under certain circumstances. That does not mean that the product is faulty. 1.1-Cleaning the screen and cabinet... After powering off, wipe the screen and the cabinet clean with a soft and dry cloth. We recommend that you do not use patented polishes or solvents on the screen or cabinet since they may cause damage. 1.2-Disposing of your TV at the end of
ページ4に含まれる内容の要旨
1.5-Changing the plug The supplied mains cable already has a mains plug fitted, however should you need to replace it at any time please refer to the appropriate wiring information below for your particular cable. 2
ページ5に含まれる内容の要旨
2 Features of your new television We would like this product, which has been manufactured in modern facilities in accordance with total quality principles, to offer you the best performance. Therefore, we would like you to read this entire manual carefully before you use your product and keep it for future reference. 2.1-Special Features • HD-Ready feature. • HDCP feature. • 2-HDMI connection input. • High image and sound performance. • CI slot input. • 8-day EPG (Electronic Program Guide) •
ページ6に含まれる内容の要旨
3 Important Safety Instructions This symbol is used to warn the user about the “dangerous voltage” contained inside the housing of the product that may create a risk of electrical shock. This symbol is used to remind the user important usage and service instructions supplied with the TV. • Never install the TV into closed places 1) Please READ the operating such as bookcases or cabinets unless instructions before using adequate ventilation is provided. your TV for the first time. 2) Please
ページ7に含まれる内容の要旨
10) Never operate your Note: Do not use defective sockets. TV close to water. Make sure that the plug is firmly Operating your TV, inserted into the socket. If the plug for example, near a remains loose, then it can cause fire bathtub, washbasin, due to arcing. Refer to an electrician kitchen washbasin, to have your socket replaced. washing basin, wet basement and 13) Make sure that the power swimming pool can cause fire or electric cable is not stepped on and shock. that there is no be
ページ8に含まれる内容の要旨
18) Wipe the TV cabinet 21) Do not dispose of your TV clean with a soft and dry with regular household waste. cloth. Wipe dust from the Observe local laws and screen gently with a soft regulations for disposal. cloth. Stubborn stains can be cleaned with a 22) For stand fitting and removal please refer cloth slightly moistened to loose leaf sheet inside TV carton. with soap and lukewarm water. Never use solvents such as thinner or gasoline Note 1: This is a Class A product. During for
ページ9に含まれる内容の要旨
4 Start Remove your television carefully from its box. Note: If you are not going to use your You can keep the packaging of your television television for a long time, unplug its power to use in future. cable from the socket. Contents of the box 4.3-Performing initial start and Power cable Remote control settings 2 batteries To set up your television, read the sections Note: Scart, HDMI, VGA and PHONO on the TV controls and making the channel cables are not supplied with the device. set
ページ10に含まれる内容の要旨
5 Your new television 5.1-TV Control Panel or or Program Down/Up button Volume Level Down/Up or or button or or or or Stand by indicator Menu button/Source selection button Bright light: TV is in Stand-by Dimmed light: TV is On or or or No light: Power Cable is not connected. Power/Standby button 5.2-Rear and Side External Connections or 12 S-Video input 1 Component video input (Y) 2 Component audio input (L) 13 Audio input Phono connector (Left/L) 3 Component video input (Pb) 4 Component au
ページ11に含まれる内容の要旨
5.3-Remote Control Standby Temporary off button AV Source Menu button Temporary sound mute button 16:9 Picture format selection button Picture and Teletext (PAT) button Zoom Zoom mode selection button SUBT Subtitle selection button (D) AUDIO Audio language selection button (D) FAV Favorites channel list selection button Teletext page stop button (Stop) EPG EPG menu button (D) Teletext Question/Answer button (Reveal) INFO Information display button Teletext mode index page button MENU Enter menu
ページ12に含まれる内容の要旨
6 Performing the initial power-on settings 6.1.4-Temporary sound mute (MUTE) 6.1-TV controls To temporarily mute the sound of your 6.1.1-Temporary on/off (STAND-BY) television, press the MUTE button When you press the red STANDBY on your remote control. In that case, button located on your remote control MUTE symbol will appear on the while your television is switched on, screen. When you press the same the sound and the picture will go off. button a second time, the sound will In the
ページ13に含まれる内容の要旨
6.2-Turning on your television for the first time and tuning Installation Guide menu will be displayed on the screen when you turn on your television CHANNEL SETUP for the first time. Please select country and scan type, then press OK to start tuning England Country Selection DTV Scan Type Installation Guide Time Zone London GMT Language Settings English Active antenna power Back Select Auto tuning Exit Select Exit Scroll to the Country Selection tab by pressing the Up/Down Press Right/Left
ページ14に含まれる内容の要旨
Channel will appear in the list and be stored ADDITIONAL INFORMATION in the memory when it is found. Press MENU button to return to the previous menu from Please note that Encrypted channels may the manual search menu or press EXIT not be stored after scanning in the Digital TV button to exit the menu. channels. If this is the case then you will need to rescan the channels again but this time 6.4-Performing Analogue change the LIST SCRAMBLED CHANNELS from AUTO to ON: channel settings 6
ページ15に含まれる内容の要旨
6.4.2-Manual tuning of analogue Analogue Manual Tuning channels and storing in the memory System I 6.4.2.1-If you already know the Channel C 4 channel number Fine tuning +00 Search Select Analogue Manual Tuning by pressing the Up/Down movement Programme no 1 buttons in the CHANNEL SETUP Skip No menu and confirm by pressing the Frequency 62.25 Mhz OK button. Analogue Manual Save Tuning menu will be displayed. Select Back Exit Analogue Manual Tuning In the Program no tab, enter the channel
ページ16に含まれる内容の要旨
No Information 6.6-Program table No Information With the program table, you may list the television channels, delete channels, create ALL CHANNELS Wednesday 18 Jun 2008 14:45 favorites list, lock any channel you wish or Channel 1 No Information change the names of the analogue channels Channel 2 Channel 3 according to your personal choice. Select the Channel 4 Program Table tab by pressing the Down Channel 5 Channel 6 movement button in CHANNEL SETUP Channel 7 menu and confirm with the OK
ページ17に含まれる内容の要旨
created. To do this, press the FAV button on 6.6.6-Skipping a stored channel your remote control. Favourite List menu will In the event that you do not wish to be displayed. see certain programs while navigating Favourite List through the channels using the P+/P- buttons, then you can use ALL CHANNELS this function. Select the program that will be hidden by pressing the FAV1 Up/Down or Right/Left movement FAV2 buttons, scroll to the Skip option and press OK button to confirm. FAV3 SKIP
ページ18に含まれる内容の要旨
6.6.8-Channel List Note: Signal Information menu will be active only for Digital broadcasts. If you press OK button when no menu is open, Channel List menu will be displayed 6.8-CA Module (Conditional on the screen. Access) In this menu, you can check the CA Module settings. If a CI module is inserted for a CHANNEL LİST channel that has a scrambled broadcast, then a submenu for that module is opened and the Channel 1 information for that module is updated. Channel 2 Channel 3 6.9-Active
ページ19に含まれる内容の要旨
7 The settings on your new television 7.1.3-Sound Type 7.1-Performing the Sound The program you watch may be broadcast settings in stereo or in two different languages. Using You may perform Volume settings by using the Right/Left movement buttons in this the V+ or V- buttons on your television or the menu, you can select Mono/Stereo or Dual-1/ VOL+/VOL- buttons on your remote control. Dual-2. You can perform other Sound settings by 7.1.4-Sound Mode entering the Sound menu. To do this,
ページ20に含まれる内容の要旨
7.1.6-Headphone the Advanced Picture Settings menu. The changes you have made in the PICTURE By connecting headphones to your television menu will be stored in the memory without you can listen to the program sounds requiring any other operation. independently from your television. To turn up and down the headphone volume level, select 7.2.2-Picture Mode Headphone tab from the Sound menu and You can select either one of the adjust the volume level by using the Right/Left four non-adjust
